USCGC hickory (WLB-212) drydock repair FY27
Open Pre-Solicitation Posted
- Solicitation number
- 70Z08527RIBCT270001087
- Agency
- Not on record
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- PSC
- J999 Non-Nuclear Ship Repair (West)
- Place of performance
- Hawaii, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Coast Guard Surface Forces Logistics Center in Alameda, California is issuing a sources sought notice and request for information to identify sources for drydock maintenance on the USCGC HICKORY (WLB-212) in FY27, with responses due December 7, 2026. The notice carries a geographical restriction, subject to a U.S. Coast Guard District 14 (Hawaii) military consideration memorandum, and uses no set-aside. The applicable NAICS is 336611, Ship Building and Repairing, with a 1,300-employee size standard, and the PSC is J999, Non-Nuclear Ship Repair (West).
All work is performed at the contractor's facility, and the contractor must furnish all facilities, materials, equipment, and personnel. The drydock period is 84 days, from July 15, 2027 through October 7, 2027, set to accommodate cutter operational needs. The scope comprises approximately 110 work items, "not limited to" hull plating ultrasonic testing, underwater body preservation, propeller removal and inspection, propulsion shaft removal, inspection, and reinstallation, rudder removal, inspection, reinstallation, and preservation, 100% construction deck preservation, tank cleaning and inspection, and boat davit inspection. Fire prevention requirements are itemized as D-001. The vessel's homeport is Coast Guard Station Apra Harbor, Guam 96915.
Notice text
This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations.
The applicable NAICS Code is 336611, Ship Building and Repairing, and the size standard is 1,300 employees.
REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, and Alameda, CA to identify sources capable of providing the following: Contractor shall provide all necessary labor, materials, services, equipment, supplies, power, accessories, special tools and such other things as are necessary to perform DRYDOCK maintenance to the U.S. Coast Guard Cutter, USCGC HICKORY (WLB 212).
USCGC HICKORY (WLR-WLB 212) DRYDOCK AVAILABILITY FY27.
ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees.
GEOGRAPHICAL RESTRICTION:
YES, SUBJECT TO U.S COAST GUARD DISTRICT 14 - HAWAII MILITARY CONSIDERATION MEMORANDUM
PLACE OF PERFORMANCE: Contractor’s Facility
DESCRIPTION OF WORK:
This requirement is for the contractor to provide all necessary facilities, materials, equipment, personnel, and other such things necessary to perform Dry-dock repairs to the U.S. Coast Guard Cutter (USCGC) HICKORY (WLB 212). This vessel’s homeport is Coast Guard Station Apra Harbor Guam 96915. All work is to be performed at the Contractor’s facility. The required performance period is 84 days. The performance period is 15 July 2027 – 07 October 2027 to accommodate Coast Guard cutter operational needs.
Description: This Dry Dock will consist of approximately one hundred and ten (110) work items, not limited to: hull plating ultrasonic testing, underwater body preserve, propeller removal and inspect, propulsion shaft remove, inspect and reinstall, rudders remove, inspect, reinstall and preserve, construction deck 100% preserve, tanks clean and inspect, and boat davit inspect.
ITEM
DESCRIPTION
D-001
Fire Prevention Requirements «TYPE»
D-002
Hull Plating, U/W Body, Inspect
D-003
Hull Plating, U/W Body, Ultrasonic Testing
O-004
U/W Body, Preserve, 100 percent
O-005
U/W Body, Preserve, Partial, Condition A
O-006
U/W Body, Preserve, Partial, Condition B
O-007
U/W Body, Preserve, Partial, Condition C
D-008
Hull Plating, Freeboard, Ultrasonic Testing
O-009
Hull Plating Freeboard, Preserve, 100 Percent
O-010
Hull Plating Freeboard, Preserve, Partial
O-011
Hull Plating Freeboard (Buoy Port Areas), Preserve
O-012
Hull and Structural Plating, General, 10.2 lbs. Steel, Renew
O-013
Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew
O-014
Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew
O-015
Hull And Structural Plating, General, 20.4 lbs. Steel Plate, Renew
O-016
Hull and Structural Plating, General, 7.5 lbs., 3/16 in. Steel Plate, Renew
O-017
Hull and Structural Plating, General, 7.65 lbs. Steel Plate, Renew
O-018
Hull And Structural Plating, General, Cracked Steel Welds, Repairs
O-019
Hull and Structural Plating, General, Degraded Weld, Steel, Repair
D-020
Cathodic Protection, Zinc Anodes, Renew
D-021
Impressed Current, Cathodic Protection System and Reference Cell Anodes, Renew
D-022
Impressed Current Cathodic Protection System, Inspect and Maintain
D-023
Appendages, U/W, Leak Test
O-024
Appendages, U/W, Internal, Preserve
O-025
Chain Locker, Preserve, 100 Percent
D-026
Voids, Non-Accessible, Leak Test
O-027
Voids, Non-Accessible, Internal Surfaces, Preserve
O-028
Accessible Voids, Preserve, 100 Percent
O-029
Accessible Void(s), Preserve, Partial
D-030
Propulsion Shaft Fairwaters And Rope Guards, Inspect
D-031
Grey Water Holding Tanks, Clean and Inspect
O-032
Tanks, Grey Water Holding, Preserve, 100 Percent
O-033
Tanks, Grey Water Holding, Preserve, Partial
D-034
Sewage Holding Tanks, Clean and Inspect
O-035
Tanks (Sewage Holding), Preserve, 100 percent
O-036
Tanks (Sewage Holding), Preserve, Partial
D-037
Sewage Piping, Clean and Flush
D-038
Tanks, Potable Water, Clean and Inspect
O-039
Tanks, Potable Water Preserve, 100 Percent
O-040
Tanks, Potable Water, Preserve, Partial
D-041
Tanks, Ballast, Clean and Inspect
O-042
Tanks, Ballast, Preserve, 100 Percent
O-043
Tanks, Ballast, Preserve, Partial
D-044
Tanks, MP Fuel Service, Clean and Inspect
O-045
Tanks, MP Fuel Service, Preserve, Partial
D-046
Propulsion Shafting; Remove, Inspect, and Reinstall
D-047
Propulsion Shaft Seals, Mechanical Overhaul And Inflatable Renewal
D-048
Propulsion Shaft Bearings, External, Check Clearances
O-049
Propulsion Tail Shaft Sleeve, Skim Cut
O-050
Propulsion Shaft Bearing, Stave Renewal
O-051
Stern Tube Interior Surfaces, Preserve, 100 Percent
D-052
Controllable Pitch Propellers, Clean and Inspect
D-053
Controllable Pitch Propeller, System Maintenance, Perform
D-054
Controllable Pitch Propeller Hub, General Maintenance with EAL, Perform
D-055
Controllable Pitch Propeller Hub, Remove and Reinstall
D-056
Main Diesel Engine, MDE, Exhaust Piping, Commercial Clean
D-057
Ship Service Diesel Generator, SSDG, Exhaust Piping, Commercial Clean
D-058
Vent Ducts, Engine And Motor Room, All, Commercial Cleaning
D-059
Vent Ducts, Galley and Pantry Room, All, Commercial Cleaning
D-060
Vent Ducts, Laundry Exhaust, Commercial Cleaning
D-061
Vent Ducts, All Other, Commercial Cleaning
O-062
Sea Valves and Waster Pieces, Overhaul Or Renew
O-063
Sea Strainers, Duplex, All Sizes, Overhaul
O-064
Sea Strainers, Simplex, All Sizes, Clean and Inspect
D-065
Sea Strainers, All Sizes, Renew
D-066
Sea Bay, Clean and Inspect
O-067
Sea Bay, Preserve 100%
D-068
Compressed Air Receivers and System Valves, All, Clean, Inspect, Hydro and Lift
D-069
Rudder, Inspect And Repair
O-070
Rudder Bearings, Renewal
O-071
Rudders, Preserve, 100 Percent
D-072
Rudder Stock Bearings, Check Clearances
D-073
Rudder and Rudder Stock, Remove and Inspect
O-074
Thruster Units (Bow And Stern), Overhaul
O-075
Thruster Unit Bearings, Renew
D-076
Hydraulically Operated Cargo Hatch, Inspect and Service
D-077
Hull Fittings (Mooring and Towing), Inspect and Test
D-078
Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test
D-079
Hydraulic Chain Stoppers, Inspect and Service
D-080
Mechanical Chain Stoppers, Inspect and Service
D-081
Crossdeck Winches, Inspect and Service
D-082
Hydraulic Inhaul Winch, Inspect And Service
D-083
Anchor Windlass, Inspect and Service
D-084
Anchor Chains and Ground Tackle, Inspect and Repair
D-085
Warping Capstan, Inspect and Service
D-086
Single Point Davit, Inspect and Service
O-087
Welin Lambie Dual Point Davit TWPIV 5.0B, Inspect, Test, and Overhaul
D-088
Decks – Exterior (Buoy or Construction Deck), Preserve 100%
D-089
Heat Exchangers, Clean, Inspect And Hydro
D-090
Fathometer Transducer, General Maintenance
D-091
Fixed CO2 FF Bottles, Inspect and Hydrostatic Test
O-092
Superstructure, Preserve, Partial
D-093
Drydock
D-094
Temporary Services, Provide - Cutter
D-095
Sea Trial Performance, Support, Provide
D-096
Watertight Doors and Scuttles, External, Renew
D-097
Anchor Chain and Ground Tackle, Preserve
D-098
SORS Cargo Rail Remove
D-099
Buoy Crane, Appleton EB600-60-40, Inspect and Service
D-100
Deck Covering (Interior Wet/Dry), Renew
D-101
Port Pilothouse Window, Renew
D-102
Pilot House Windows and Frame, Repair and Reseal
D-103
Piping Insulation, Renew
D-104
Incinerator Room Plating, Repair
D-105
Pilot House Weathertight Door, Renew
D-106
Sewage Piping, Renew
D-107
Fly Bridge Kickpipes, Renew
D-108
Deck Covering, Carpet Remove, Renew
D-109
Shower Pan, Inspect and Renew
D-110
Decks - Potable Water Pump Room and Passageway, Preserve
ANTICIPATED PERIOD OF PERFORMANCE:
15 July 2027 through 07 October 2027 (Subject to change at the discretion of the Government). If the company is unable to meet this period of performance, it is incumbent upon the company to propose an alternative 84 calendar day period of performance.
SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to POC listed in the Sam.Gov announcement with the following information/documentation: Ou Saephanh @ Ou.T.Saephanh@uscg.mil and Sandra Martinez @ Sandra.A.Martinez@uscg.mil no later than 8:00 AM Pacific Time 17 December 2026, with all of the following information/documentation:
1. Name of Company, Address and DUNS Number.
2. Point of Contact and Phone Number.
3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern
4. Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to your company.
a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA.
b. If claiming HUBZone status, provide a copy of your HUBZone Certificate from SBA.
c. If claiming SDVOSB status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611.
d. If claiming VOSB status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611.
e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million.
f. If claiming Woman Owned Small Business (WOSB) status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611.
g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611.
5. Statement of Proposal Submission: Statement that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice.
6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant.
SAM: Interested parties should register at the System for Award Management (SAM) website as prescribed in FAR Clause 52.204-7 System for Award Management (OCT 2018). SAM can be obtained by accessing the internet at https://www.sam.gov/SAM/ or by calling 1-866-606-8220.
Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| CGC wyaconday drydock repairs | — | No set-aside | |
| USCGC joseph tezanos drydock availability FY2027 | Coast Guard | No set-aside | |
| USCGC richard etheridge (WPC-1102) drydock availability | — | No set-aside | |
| CGC kukui drydock | — | Total Small Business | |
| CGC frederick hatch U/W hull cleaning and optional zinc repair | — | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity