UAS-based Precision Aim for Device Render Safe in CBRN Environments
Open Pre-Solicitation Posted
- Solicitation number
- DTR27BZ02-NV001
- Agency
-
Defense Threat Reduction Agency
Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Points of contact
-
- Steve Waugh steven.w.waugh.civ@mail.mil
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
Defense Threat Reduction Agency is preparing a Total Small Business set-aside solicitation for Phase I SBIR proposals under DoD topic DTR27BZ02-NV001, a UAS-based precision-aiming payload for render-safe operations in CBRN environments, with responses due January 6, 2027. The notice was posted November 4, 2026. The topic seeks a novel payload that integrates with one or more Unmanned Aerial Systems platforms, operates remotely, and functions in a Chemical, Biological, Radiological, or Nuclear (CBRN) environment. The payload must remotely and accurately aim currently fielded EOD disruptors against explosive ordnance threats, often associated with chemical or biological warheads, to enable standoff render-safe missions outside contaminated areas. Technology area is Chem Bio Defense and Sensors, with focus area Trusted AI and Autonomy. Listed keywords include Remote Command and Control (C2) and Disruptor Payload Integration. The notice states ITAR: No and CMMC Level 1. It is classified under NAICS 541715 and PSC AC12.
Notice text
DoD SBIR topic DTR27BZ02-NV001
Component: DTRA
Command: DTRA
Phase: SBIR Program Phase I Action
Technology Areas: Chem Bio Defense; Sensors
Focus Areas: Trusted AI and Autonomy
Keywords: Unmanned Aerial System (UAS); Explosive Ordnance Disposal (EOD); Render Safe; Precision Aiming; Remote Operations; Operational Standoff; Disruptor Payload Integration; CBRN / CBRNE Operations; Trusted Autonomy; Remote Command and Control (C2)
ITAR: No
CMMC: Level 1
Objective:
Develop novel precision-aiming payload capability that can be employed by UAS and operated remotely. Hand-emplaced precision aiming is a common technique used by all militaries and civilian defense forces. Warfighters require the ability to remotely emplace and precisely aim, adjust, and employ disruptor shells against explosive ordnance threats often associated with Chemical or Biological warheads, supporting standoff and remote render-safe operations. The proposed approach should include one or more payloads that can be integrated with one or more Unmanned Aerial Systems (UAS) platforms and be capable of operating in a Chemical, Biological, Radiological, or Nuclear (CBRN) environment.
Description:
DTRA is in need of technical innovations associated with warfighting units performing very long range WMD device render-safe missions from a safe distance, outside of potentially CBRN contaminated environments. Explosive Ordinance Disposal (EOD) definitions and terms are commonly used by many nations and exist on the public internet including steps involving EOD detection, identification, field evaluation, render safe, recovery and disposal. Successfully performing stand-off EOD missions with personal positioned away from the contaminated environment requires a payload capable of remotely and accurately aiming via employment of currently fielded EOD disruptors against the explosive ordnance threat with a high degree of precision.
Payload capabilities of the proposed solution should ideally be sized to be compatible with currently fielded Department of War UAS systems. The desired end state is a system weight that is designed for small-unit operations UAS.
DTRA conducts counter WMD science and technology research and testing efforts for Joint Services EOD missions. Ground robotic platforms currently provide the only fielded remote-employment method for EOD disruptors, but these lack terrain-independent access and approach-angle flexibility that an aerial platform would provide. Small unit operations UAS platforms with sufficient flight endurance and payload capacity to carry current EOD-relevant payloads into contested or austere environments. This topic seeks novel approaches to providing precision remote-aiming payloads delivered and emplaced by remote UAS with subsequent operational render safe execution orchestrated from remotely. The capability should be able to be remotely recovered and re-charged to enable system re-use at another location after the render safe mission is completed
Phase I:
Design a system architecture and conduct an Analysis of Alternatives (AoA) to identify and evaluate candidate remote precision-aiming disruptor payloads against Joint Service EOD operational requirements. Assess mechanical, electrical, and software adaptability and versatility of leading candidates from each technology category, and define the specific engineering interfaces (mechanical mounting, power, control/data links, payload release and re-attachment mechanisms) required to integrate the at least one proposed system. Include in the proposed architecture a proposed method to communicate and control from a remote location, outside and upwind of a potential CBRN contaminated area. If feasible, a visual simulation of the proposed architecture executing an example mission would be helpful.
Phase II:
Construct the engineering integration and prototype effort identified in Phase 1. Construct and bench-test the set of key physical and electronic interfaces using the proposed UAS platform and the selected precision-aiming disruptor payload, including pickup/drop-off release mechanisms, remote aiming control integration, and command-and-control software integration. Demonstrate subsystem functionality in a Government identified controlled test environment.
Phase III:
Revise prototype design based on operational feedback and any testing results during Phase 2. Produce two complete sets of proposed system prototype capability including methods to enable remote command and control. Conduct two integrated field employment and demonstrations of the combined system, in representative austere and in an urban operational environment, the government will provide access to government test ranges and assist in test planning. Demonstrate end-to-end mission execution: aerial transit, precision payload emplacement, remote disruptor aiming and adjustment, and (as an objective capability) payload retrieval/repositioning.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Remote UAS-based X-Ray for Device Assessment in CBRNE Environments | Defense Threat Reduction Agency | Total Small Business | |
| Dynamic Sensor-Tasking and Routing System for Subsurface Hazard Detection | Defense Threat Reduction Agency | Total Small Business | |
| Counter-Unmanned Aerial Systems Rapid Maturation | Office of the Secretary of Defense | Total Small Business | |
| Counter-Unmanned Aerial Systems Rapid Maturation | Office of the Secretary of Defense | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity