Two (2) hard bearing, dual-drive, horizontal balancing machines.
Open Pre-Solicitation Posted
- Solicitation number
- 27-15-1001
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- PSC
- 3419 Miscellaneous Machine Tools
- Place of performance
- Tinker AFB, Oklahoma, United States
- Points of contact
-
- Christopher Bara avnipemarketresearch@dla.mil
Notice details come from SAM.gov. Updated .
About this opportunity
DLA Weapons Support Richmond is issuing a sources sought notice on behalf of Tinker Air Force Base to identify sources for two hard bearing, dual-drive, horizontal balancing machines, with responses due December 18, 2026. The Government intends to solicit and negotiate with only one source under FAR 6.302, and the notice uses no set-aside. The notice is market research only, is not a request for quote or proposal, and carries no funding for response preparation.
Work is performed at Tinker AFB, Building 3001, Oklahoma City-Air Logistics Complex. The contractor must deliver turnkey installation, including foundation preparation, utility connections, shipping, unloading and rigging, IUID tags, tooling, qualification and certification testing at the final location, and five days of operator training for five personnel. Tinker AFB provides 480VAC electrical supply and 100 PSI compressed air within 30 feet of each machine.
Machine 1 is ARP 4048 Class 1000 with a 4,500-pound total load capacity, 50 HP belt and end drive motors, and support for rotors up to 10,000 pounds at 500-1500 RPM, with a maximum rotor length of 106 inches and maximum diameter of 69 inches. Machine 2 is ARP 4048 Class 3000 with a 9,500-pound capacity, 50 HP belt drive and 75 HP end drive motors, support for rotors up to 15,000 pounds, a maximum bed length of 16 feet, and enclosure dimensions up to 20 by 14 feet. Both machines must be certifiable to SAE AS8617, include C600-class enclosures limiting noise to 84 dB, run Microsoft Windows 11 LTSC with OPC-UA communication, provide permanent 20 dB noise reduction, and use new, commercially available, UL-compliant components.
Deliverables include two ARP4162 horizontal proving rotors with certification documentation, tooling packages, and technical documentation in three hard copies and one electronic copy. The contractor must submit a Plan of Action and Milestones and an Acceptance Test Plan within 30 days of award. Machines undergo Contract Quality Assurance Inspection at the contractor's facility and Final Inspection/Acceptance at the destination. Hazardous materials are prohibited except nickel metal hydride and lithium memory-backup batteries, and PCB certification showing less than 2 ppm is required.
Responses go by email to AVNIPEMarketResearch@dla.mil, with the subject line including "ATTN: IPE Tracking Number 27-15-1001." The source names no incumbent. The notice is classified under NAICS 333517 and PSC 3419.
Notice text
DLA Weapons Support Richmond is issuing this sources sought as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for two (2) hard bearing, dual-drive, horizontal balancing machines. for Tinker Air Force Base (AFB). Potential sources must provide turn-key machine with: technical data (e.g. manuals, drawings), shipping/delivery, unloading and rigging, installation, foundation, IUID Tag, tooling, and training. The result of this market research will contribute to determining the method of procurement.
The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. THIS SOURCES SOUGHT IS FOR INFORMATION PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE/PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
Submission Instructions: Interested parties should submit a response to this Sources Sought Notice before closing date & time. All responses under this Sources Sought Notice must be emailed to AVN IPE Market Research at AVNIPEMarketResearch@dla.mil. Email subject line must include ATTN: IPE Tracking Number 27-15-1001
Responses should be not exceed ten (10) one-sided 8.5 x 10 inch pages with a font that is no smaller than 10 point as this is not a request for a proposal but only a request for submission of a vendor's capability to perform this requirement. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Draft copy of the purchase description is provided with this posting. Attachment A: H6WP40 - Floor Plan Drawing - this drawing is not available at this time. . Of specific note, please be able to comment on the following:
3.3.8 Balance System Control Computer - the requirement is for a Microsoft Windows 11 LTSC operating system
3.9.1.1 Foundation. - the current expected requirement is for the machines to be placed upon a concrete foundation to provide the dynamic stability needed for the weights being rotated. If there is an alternate means to provide for performance required in the purchase description without needed to use a concrete foundation, please provide information to this posting on how this can be achieved.
Files
| File | Type | Posted |
|---|---|---|
| 889_SOW_sam.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Small CNC Vertical Milling Machine | Air Force Test Center | Total Small Business | |
| CNC Horizontal Boring & Milling Machine | Aviation | No set-aside | |
| Horizontal Machining Centers | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity