Two (2) DMG MORI NTX 2500
Closed Pre-Solicitation Posted
Not the latest version. See the latest pre-solicitation from .
- Solicitation number
- 23-40-1012
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- PSC
- Not on record
- Place of performance
- San Diego, California, United States
- Points of contact
-
- Christopher Bara avnipemarketresearch@dla.mil
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Aviation (DLA-Aviation) is conducting market research to identify potential vendors for two DMG MORI NTX 2500 Turning Mill Machining Centers. This sources sought synopsis aims to gather information from companies capable of providing the specified equipment, including tooling, a Fanuc F31iB5 post processor with CELOS Controller, training, and technical data. The procurement falls under NAICS code 333517 for Machine Tool Manufacturing, and interested parties are requested to submit their capabilities by March 3, 2025, at 11:59 pm EST via email to avnipemarketresearch@dla.mil. Submissions must not exceed ten one-sided pages with a minimum 10-point font. It is crucial to note that this is a market research initiative and not a formal solicitation, meaning no funds are available for response preparation and the government is not obligated to award a contract.
The pre-solicitation notice does not indicate any specific set-aside designations, and no incumbent contractors are mentioned. The place of performance will be Fleet Readiness Center Southwest (FRCSW) at North Island, California. While no specific award value or budget range is provided, the procurement involves two complete machining centers with associated equipment and services. The procurement process includes requirements for IUID (Unique Item Identification), removal of existing equipment, and foundation updates. Vendors responding to the sources sought notice should demonstrate their capability to fully meet the comprehensive equipment and service requirements. The timeline suggests a potential solicitation and award process following this market research phase, though specific dates for future steps are not explicitly outlined in the notice.
Notice text
The DLA-Aviation is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for TWO (2) DMG MORI NTX 2500 Turning Mill Maching Centers. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 333517.
THIS SOURCES SOUGHT IS FOR INFORMATION PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE/PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNIAL DESCRIPTION IS STRICTLY VOLUNTARY.
Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Submission Instructions: Interested parties should submit a response to this Sources Sought Notice by March 3, 2025, NLT 11:59 pm EST. All responses under this Sources Sought Notice must be emailed to avnipemarketresearch@dla.mil. Responses should be not exceed ten (10) one-sided 8.5 x 10 inch pages with a font that is no smaller than 10 point as this is not a request for a proposal but only a request for submission of a vendor's capability to perform this requirement.
Interested parties that can provide the required TWO (2) DMG MORI NTX 2500 with tooling, a Fanuc F31iB5 post processor with CELOS Controller, training, technical data, IUID, removal of existing equipment, updating foundation, may identify their interest and capability to respond to this requirement no later than the stated closing date/time.
Place of performance is FLEET READINESS CENTER SOUTHWEST (FRCSW) North Island California.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Justification for Two (2) DMG MORI NTX 2500 Turning Mill Machining Centers | Limited / Sole Source Justification | |
| Milling and Turning Machine | Pre-Solicitation | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| One (1) DN PUMA Vertical Turning Center (VTC) 1620M Machine | Aviation | No set-aside | |
| FD2030-26-00244 | Aviation | No set-aside | |
| FD2030-22-01649-02 | Aviation | No set-aside | |
| Hub, compressor, nonaircraft gas turbine engine / NSN 2835-01-557-4125 / nimitz class CVN | Aviation | No set-aside | |
| SPE4A725R0823-1680-016930490- Miscellaneous Aircraft Accessories and Components | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity