Tektronix Repair and Calibration
Closed Solicitation Posted
- Solicitation number
- N0016426Q0118
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 811210 Electronic and Precision Equipment Repair and Maintenance
- Place of performance
- Crane, Indiana 47522, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Surface Warfare Center (NSWC) Crane, under the Department of the Navy Naval Sea Systems Command, is seeking repair and calibration services for Tektronix test and measurement equipment through sole source procurement N00164-26-Q-0118. The procurement covers repair and calibration of four line items: two arbitrary waveform generators (AWG5012 and AWG5012C), one logic analyzer benchtop mainframe with six modules (TLA7016), and general Tektronix repair and calibration services. All services must include certificates of traceable calibration and return shipping to NSWC Crane. The Government has determined to sole source this requirement to Tektronix, Inc. based on the company's ownership of proprietary rights, data, schematics, trained and licensed technical personnel, and stockpile of replacement parts—all elements deemed critical for timely and accurate repairs. However, the Government reserves the right to conduct competitive procurement if capability statements from other responsible sources warrant such action. The solicitation closes on April 17, 2026, at 4:00 PM Eastern Time, with quotes to be submitted via email to cierra.n.vaughn2.civ@us.navy.mil.
This solicitation contains no set-aside designation, though it is designated for Women-Owned Small Business concerns and classified under NAICS 811210 with a size standard of 500 employees. Tektronix, Inc., located at 13725 SW Karl Braun Drive, Beaverton, Oregon 97077, is the sole source contractor being pursued for this requirement. While no specific award value is stated in the solicitation documents, the pricing arrangement is firm fixed price for all line items. The required delivery date for all repairs and calibration services is May 31, 2026, to NSWC Crane Supply Operations Building 41 Receiving. The place of performance is Crane, Indiana 47522, with inspection and acceptance occurring at destination. All offerors must be registered in the System for Award Management (SAM) and comply with FAR and DFARS clauses, including cybersecurity maturity model certification (CMMC) Level 1 and electronic invoicing through Wide Area Workflow (WAWF).
Notice text
N00164-26-Q-0118 – SOLE SOURCE – Tektronix Repair and Calibration – FSG J066 - NAICS 811210
ISSUE DATE 10 APR 2026 – CLOSING DATE 17 APR 2026 – 04:00 PM Eastern Time
ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for a service agreement for Tektronix, INC.
SOLE SOURCE PROCUREMENT- The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, TEKTRONIX, INC., 13725 SW Karl Braun Dr, Beaverton, Oregon, 97077., United States under the authority of FAR 13.106-1. This is being sole sourced because Tektronix owns the proprietary rights to all data, schematics and have in-house , both trained and licensed technical personnel as well as a stockpile of repair/replacement parts. These elements are all necessary and critical to enable both timely and accurate repairs of the Tektronix Equipment. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov.
This solicitation is being issued pursuant to the procedures at FAR Part 13. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-26-Q-0118 is hereby issued as an attachment hereto.
Contract Opportunities on https://sam.gov/ has officially replaced FBO.gov
All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/. It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation.
For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award.
Offers shall be e-mailed to cierra.n.vaughn2.civ@us.navy.mil. All required information must be received on or before 17 APR 2026 @ 04:00 PM EASTERN TIME.
Files
| File | Type | Posted |
|---|---|---|
| Non comp_Redacted.pdf | ||
| SYNOPSIS N0016425Q0118.pdf | ||
| Solicitation - N0016426Q0118.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Repair and Calibration of Keysight Microwave Analyzers | Naval Sea Systems Command | No set-aside | |
| Calibration Kit Radio Frequency | Naval Sea Systems Command | No set-aside | |
| Keysight UXA Signal Analyzer | Naval Air Warfare Center | No set-aside | |
| Repair of AN/ALQ-131 Power Supplies | AFLCMC Robins AFB | No set-aside | |
| Digital microscope VHX-XL series | Naval Sea Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity