T-Slot Framing Systems
Closed Special Notice Posted
- Solicitation number
- N00421-11-T-0085
- Agency
-
Naval Air Warfare Center
Naval Air Systems Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 331312 Primary Aluminum Production
- Place of performance
- Nawcad St Inigoes, Maryland 20684, United States
Notice details come from SAM.gov. Updated .
Notice text
2 versions
Update #2 · Latest ·
The Naval Air Warfare Center Aircraft Division (NAWCAD), St Inigoes, Maryland has a requirement for: 1.5"x1.5" Heavy Extrusion 145" length P/N;15QE1515, QTY (768 ). 5/16-18 Drop In T-Nut W/Alignment Ball, P/N; 15FA3511, QTY (840). Deadbolt latch-Side Latch, P/N; 15AC8762, QTY (72). 10-32 Drop In T-Nut W/Alignment Ball, P/N; 15FA3534, QTY (7200). 2 Hole Inside Gusset Corner Bracket,P/N; 15CB4840, QTY (144). 4 Hole Inside Gusset Corner Bracket, P/N; 15CB4842, QTY (840). Anchor Fastener W/Drop-In, P/N; 15FAC3888, QTY (3000). End Cap For 15 Ex/Qe1515,L, UI W/Bhscs, P/N; 15AC7825, QTY (300).Provided by Faztek LLC, Fort Wayne IN. Faztek are the original and only known provider of this non-commercial item. The production of this item requires access to proprietary information controlled by Faztek. NAWCAD intends to negotiate solely with Faztek for the above items with an anticipated award date of Feb 10, 2011 and an estimated delivery date of March 15, 2011. All responsible sources may submit a capabilities statement, which shall be considered by the agency. The Government solely for the purpose of determining whether to initiate a competitive procurement will consider all capabilities statements received. Technical capability will be determined solely on the content and merit of the information submitted in response to this provision. Therefore, it is incumbent on the interested party to provide sufficient technical literature, documentation, etc. in order for the Government to make an adequate technical assessment. The Government reserves the right to process the procurement on a sole source basis for the brand specific item based upon the responses received. The Government will not pay for any information received. The delivery date is March 15, 2011. Inspection and Acceptance shall be at destination. Offerors must be registered in the Central Contractor Registration (CCR) database prior to submission of an offer to be considered for award of any DOD contract. This may be accomplished electronically at http://www.ccr.gov/vendor.cfm.
Contact Olive Rogers at 301-757-5900, email olive.rogers@navy.mil
.
Update #1 ·
The Naval Air Warfare Center Aircraft Division (NAWCAD), St Inigoes, Maryland has a requirement for: 1.5"x1.5" Heavy Extrusion 145" length P/N;15QE1515, QTY (768 ). 5/16-18 Drop In T-Nut W/Alignment Ball, P/N; 15FA3511, QTY (840). Deadbolt latch-Side Latch, P/N; 15AC8762, QTY (72). 10-32 Drop In T-Nut W/Alignment Ball, P/N; 15FA3534, QTY (7200). 2 Hole Inside Gusset Corner Bracket,P/N; 15CB4840, QTY (144). 4 Hole Inside Gusset Corner Bracket, P/N; 15CB4842, QTY (840). Anchor Fastener W/Drop-In, P/N; 15FAC3888, QTY (3000). End Cap For 15 Ex/Qe1515,L, UI W/Bhscs, P/N; 15AC7825, QTY (300).Provided by Faztek LLC, Fort Wayne IN. Faztek are the original and only known provider of this non-commercial item. The production of this item requires access to proprietary information controlled by Faztek. NAWCAD intends to negotiate solely with Faztek for the above items with an anticipated award date of Feb 10, 2011 and an estimated delivery date of March 15, 2011. All responsible sources may submit a capabilities statement, which shall be considered by the agency. The Government solely for the purpose of determining whether to initiate a competitive procurement will consider all capabilities statements received. Technical capability will be determined solely on the content and merit of the information submitted in response to this provision. Therefore, it is incumbent on the interested party to provide sufficient technical literature, documentation, etc. in order for the Government to make an adequate technical assessment. The Government reserves the right to process the procurement on a sole source basis for the brand specific item based upon the responses received. The Government will not pay for any information received. The delivery date is March 15, 2011. Inspection and Acceptance shall be at destination. Offerors must be registered in the Central Contractor Registration (CCR) database prior to submission of an offer to be considered for award of any DOD contract. This may be accomplished electronically at http://www.ccr.gov/vendor.cfm.
Contact Olive Rogers at 301-757-5900, email olive.rogers@navy.mil
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity