Synopsis - 1 NSN - Solenoid, Electrical - CM24018001
Closed Pre-Solicitation Posted
- Solicitation number
- SPE7MX25R0022
- Agency
-
Land and Maritime
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 335314 Relay and Industrial Control Manufacturing
- PSC
- 5945 Relays And Solenoids
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Land and Maritime is seeking to procure electrical solenoids through an Indefinite Quantity Contract (IQC) with a total duration of 5 years, consisting of 3 base contract years and 2 optional years. The specific National Stock Number (NSN) 5945010897649 covers electrical solenoids with specific manufacturer part numbers from Rocker Solenoid Company and RAM Manufacturing Company. The solicitation will be available in DIBBS on December 2, 2024, with offers due by March 7, 2025. Potential contractors must have a valid Department of Defense certification from the U.S./Canada Joint Certification Office and comply with export control regulations for technical data. The final award will be based on a comprehensive evaluation of price, delivery capabilities, past performance, and other factors specified in the full solicitation document.
The contract is a total small business set-aside with a small business size standard of 750 employees. The annual demand quantity is 490 units, with a delivery schedule spanning 497 days across various increments. First Article Testing will be required for the solenoids. Only two approved sources are currently authorized for this procurement: Rocker Solenoid Company (CAGE 07797) with part number 6460 and RAM Manufacturing Company, Inc. (CAGE 55725) with part number 12524419. The solicitation involves multiple reference drawings and specifications, and contractors must navigate complex export control requirements, including potential restrictions under International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). Delivery will be to various DLA stock locations, and the government reserves the option to extend the contract period at its discretion.
Notice text
7 versions
Update #7 · Latest ·
RESPONSE DATE: Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP).
The solicitation will be available in DIBBS on or about its estimated issue date of Feb. 03, 2025.
Solicitation is for a long-term Indefinite Quantity Contract (IQC) with 3 base contract years.
DESCRIPTION:
NSN(s): 5945010897649
Item Description: SOLENOID,ELECTRICAL
Manufacturer’s Code and Part Number (P/N):
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
Drawing and Specification Numbers:
IAW BASIC DRAWING NR 19200 12524419
REVISION NR F DTD 02/21/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 96906 MS3102
REVISION NR E DTD 08/20/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C DTD 08/04/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524403
REVISION NR DTD 09/19/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524174
REVISION NR D DTD 01/26/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524443
REVISION NR A DTD 12/14/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535014
REVISION NR A DTD 01/31/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535025
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535026
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR B DTD 06/14/1995
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 L2S3025-02-FS-026
REVISION NR D4 DTD 04/15/2002
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR DTD 08/14/2018
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524007
REVISION NR M DTD 01/26/2015
PART PIECE NUMBER:
Annual Demand Quantity (ADQ): 490 EA
First Article Test (FAT) will be required.
Unit of Issue: EA (Each)
Destination Information: Various DLA Stock Locations
Delivery Schedule: 497 days
Various Increments Solicited:
FROM: TO:
- 1 61
- 62 184
- 185 306
- 307 735
All responsible sources may submit an offer/quote which shall be considered.
The proposed contract is 100% set aside for small business concerns.
The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/
To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.
One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.
Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice
The Small Business size standard is 750 employees.
Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.
The total duration (base years) shall not exceed 3 years.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 3204(a)(1). Approved sources are:
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
Update #6 ·
RESPONSE DATE: Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP).
The solicitation will be available in DIBBS on or about its estimated issue date of Jan. 31, 2025.
Solicitation is for a long-term Indefinite Quantity Contract (IQC) with 3 base contract years.
DESCRIPTION:
NSN(s): 5945010897649
Item Description: SOLENOID,ELECTRICAL
Manufacturer’s Code and Part Number (P/N):
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
Drawing and Specification Numbers:
IAW BASIC DRAWING NR 19200 12524419
REVISION NR F DTD 02/21/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 96906 MS3102
REVISION NR E DTD 08/20/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C DTD 08/04/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524403
REVISION NR DTD 09/19/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524174
REVISION NR D DTD 01/26/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524443
REVISION NR A DTD 12/14/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535014
REVISION NR A DTD 01/31/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535025
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535026
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR B DTD 06/14/1995
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 L2S3025-02-FS-026
REVISION NR D4 DTD 04/15/2002
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR DTD 08/14/2018
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524007
REVISION NR M DTD 01/26/2015
PART PIECE NUMBER:
Annual Demand Quantity (ADQ): 490 EA
First Article Test (FAT) will be required.
Unit of Issue: EA (Each)
Destination Information: Various DLA Stock Locations
Delivery Schedule: 497 days
Various Increments Solicited:
FROM: TO:
- 1 61
- 62 184
- 185 306
- 307 735
All responsible sources may submit an offer/quote which shall be considered.
The proposed contract is 100% set aside for small business concerns.
The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/
To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.
One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.
Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice
The Small Business size standard is 750 employees.
Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.
The total duration (base years) shall not exceed 3 years.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 3204(a)(1). Approved sources are:
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
Update #5 ·
RESPONSE DATE: Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP).
The solicitation will be available in DIBBS on or about its estimated issue date of Jan. 31, 2025.
Solicitation is for a long-term Indefinite Quantity Contract (IQC) with 3 base contract years.
DESCRIPTION:
NSN(s): 5945010897649
Item Description: SOLENOID,ELECTRICAL
Manufacturer’s Code and Part Number (P/N):
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
Drawing and Specification Numbers:
IAW BASIC DRAWING NR 19200 12524419
REVISION NR F DTD 02/21/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 96906 MS3102
REVISION NR E DTD 08/20/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C DTD 08/04/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524403
REVISION NR DTD 09/19/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524174
REVISION NR D DTD 01/26/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524443
REVISION NR A DTD 12/14/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535014
REVISION NR A DTD 01/31/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535025
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535026
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR B DTD 06/14/1995
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 L2S3025-02-FS-026
REVISION NR D4 DTD 04/15/2002
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR DTD 08/14/2018
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524007
REVISION NR M DTD 01/26/2015
PART PIECE NUMBER:
Annual Demand Quantity (ADQ): 490 EA
First Article Test (FAT) will be required.
Unit of Issue: EA (Each)
Destination Information: Various DLA Stock Locations
Delivery Schedule: 497 days
Various Increments Solicited:
FROM: TO:
- 1 61
- 62 184
- 185 306
- 307 735
All responsible sources may submit an offer/quote which shall be considered.
The proposed contract is 100% set aside for small business concerns.
The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/
To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.
One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.
Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice
The Small Business size standard is 750 employees.
Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.
The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base years) shall not exceed 3 years.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 3204(a)(1). Approved sources are:
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
Update #4 ·
RESPONSE DATE: Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP).
The solicitation will be available in DIBBS on or about its estimated issue date of Jan. 30, 2025.
Solicitation is for a long-term Indefinite Quantity Contract (IQC) with 3 base contract years.
DESCRIPTION:
NSN(s): 5945010897649
Item Description: SOLENOID,ELECTRICAL
Manufacturer’s Code and Part Number (P/N):
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
Drawing and Specification Numbers:
IAW BASIC DRAWING NR 19200 12524419
REVISION NR F DTD 02/21/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 96906 MS3102
REVISION NR E DTD 08/20/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C DTD 08/04/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524403
REVISION NR DTD 09/19/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524174
REVISION NR D DTD 01/26/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524443
REVISION NR A DTD 12/14/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535014
REVISION NR A DTD 01/31/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535025
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535026
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR B DTD 06/14/1995
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 L2S3025-02-FS-026
REVISION NR D4 DTD 04/15/2002
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR DTD 08/14/2018
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524007
REVISION NR M DTD 01/26/2015
PART PIECE NUMBER:
Annual Demand Quantity (ADQ): 490 EA
First Article Test (FAT) will be required.
Unit of Issue: EA (Each)
Destination Information: Various DLA Stock Locations
Delivery Schedule: 497 days
Various Increments Solicited:
FROM: TO:
- 1 61
- 62 184
- 185 306
- 307 735
All responsible sources may submit an offer/quote which shall be considered.
The proposed contract is 100% set aside for small business concerns.
The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/
To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.
One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.
Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice
The Small Business size standard is 750 employees.
Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.
The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base years) shall not exceed 3 years.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 3204(a)(1). Approved sources are:
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
Update #3 ·
RESPONSE DATE: Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP).
The solicitation will be available in DIBBS on or about its estimated issue date of Jan. 30, 2025.
Solicitation is for a long-term Indefinite Quantity Contract (IQC) with 3 base contract years.
DESCRIPTION:
NSN(s): 5945010897649
Item Description: SOLENOID,ELECTRICAL
Manufacturer’s Code and Part Number (P/N):
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
Drawing and Specification Numbers:
IAW BASIC DRAWING NR 19200 12524419
REVISION NR F DTD 02/21/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 96906 MS3102
REVISION NR E DTD 08/20/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C DTD 08/04/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524403
REVISION NR DTD 09/19/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524174
REVISION NR D DTD 01/26/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524443
REVISION NR A DTD 12/14/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535014
REVISION NR A DTD 01/31/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535025
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535026
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR B DTD 06/14/1995
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 L2S3025-02-FS-026
REVISION NR D4 DTD 04/15/2002
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR DTD 08/14/2018
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524007
REVISION NR M DTD 01/26/2015
PART PIECE NUMBER:
Annual Demand Quantity (ADQ): 490 EA
First Article Test (FAT) will be required.
Unit of Issue: EA (Each)
Destination Information: Various DLA Stock Locations
Delivery Schedule: 497 days
Various Increments Solicited:
FROM: TO:
- 1 61
- 62 184
- 185 306
- 307 735
All responsible sources may submit an offer/quote which shall be considered.
The proposed contract is 100% set aside for small business concerns.
The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/
To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.
One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.
Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice
The Small Business size standard is 750 employees.
Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.
The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base years) shall not exceed 3 years.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Approved sources are:
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
Update #2 ·
RESPONSE DATE: Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP).
The solicitation will be available in DIBBS on or about its estimated issue date of Jan. 30, 2025.
Solicitation is for a long-term Indefinite Quantity Contract (IQC) with 3 base contract years and 2 option years.
DESCRIPTION:
NSN(s): 5945010897649
Item Description: SOLENOID,ELECTRICAL
Manufacturer’s Code and Part Number (P/N):
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
Drawing and Specification Numbers:
IAW BASIC DRAWING NR 19200 12524419
REVISION NR F DTD 02/21/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 96906 MS3102
REVISION NR E DTD 08/20/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C DTD 08/04/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524403
REVISION NR DTD 09/19/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524174
REVISION NR D DTD 01/26/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524443
REVISION NR A DTD 12/14/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535014
REVISION NR A DTD 01/31/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535025
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535026
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR B DTD 06/14/1995
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 L2S3025-02-FS-026
REVISION NR D4 DTD 04/15/2002
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR DTD 08/14/2018
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524007
REVISION NR M DTD 01/26/2015
PART PIECE NUMBER:
Annual Demand Quantity (ADQ): 490 EA
First Article Test (FAT) will be required.
Unit of Issue: EA (Each)
Destination Information: Various DLA Stock Locations
Delivery Schedule: 497 days
Various Increments Solicited:
FROM: TO:
- 1 61
- 62 184
- 185 306
- 307 735
All responsible sources may submit an offer/quote which shall be considered.
The proposed contract is 100% set aside for small business concerns.
The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/
To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.
One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.
Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice
The Small Business size standard is 750 employees.
Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.
The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Approved sources are:
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
Update #1 ·
RESPONSE DATE: Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP).
The solicitation will be available in DIBBS on or about its estimated issue date of Dec. 2, 2024.
Solicitation is for a long-term Indefinite Quantity Contract (IQC) with 3 base contract years and 2 option years.
DESCRIPTION:
NSN(s): 5945010897649
Item Description: SOLENOID,ELECTRICAL
Manufacturer’s Code and Part Number (P/N):
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
Drawing and Specification Numbers:
IAW BASIC DRAWING NR 19200 12524419
REVISION NR F DTD 02/21/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 96906 MS3102
REVISION NR E DTD 08/20/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C DTD 08/04/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524403
REVISION NR DTD 09/19/1996
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524174
REVISION NR D DTD 01/26/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524443
REVISION NR A DTD 12/14/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535014
REVISION NR A DTD 01/31/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535025
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12535026
REVISION NR DTD 04/17/1988
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR B DTD 06/14/1995
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 L2S3025-02-FS-026
REVISION NR D4 DTD 04/15/2002
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524419
REVISION NR DTD 08/14/2018
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19200 12524007
REVISION NR M DTD 01/26/2015
PART PIECE NUMBER:
Annual Demand Quantity (ADQ): 490 EA
First Article Test (FAT) will be required.
Unit of Issue: EA (Each)
Destination Information: Various DLA Stock Locations
Delivery Schedule: 497 days
Various Increments Solicited:
FROM: TO:
- 1 61
- 62 184
- 185 306
- 307 735
All responsible sources may submit an offer/quote which shall be considered.
The proposed contract is 100% set aside for small business concerns.
The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/
To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.
One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.
Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice
The Small Business size standard is 750 employees.
Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.
The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years.
This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Approved sources are:
- Rocker Solenoid Company (CAGE 07797), P/N 6460
- RAM Manufacturing Company, Inc. (CAGE 55725), P/N 12524419
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Pre-Solicitation | |
| Sources sought 1 NSN LTC CM24018001 | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Solenoid, electrical | Land and Maritime | Total Small Business | |
| Solenoid, electrical | Land and Maritime | No set-aside | |
| Solenoid, electrical | Land and Maritime | Total Small Business | |
| Solenoid, electrical | Land and Maritime | Total Small Business | |
| Solenoid, electrical | Land and Maritime | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity