Swing Arm Brush Cutter
Closed Solicitation Posted
- Solicitation number
- W911S226U3574
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333120 Construction Machinery Manufacturing
- Place of performance
- Fort Rucker, AL 36362
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum seeks a swing arm brush cutter, brand name or equal, with proposals due July 10, 2026. The procurement is a Total Small Business set-aside.
Place of performance is Fort Rucker, Alabama. An acceptable equivalent must feature a 44-inch cutting width, a minimum 4-inch material cutting capacity, a horizontal reach of at least 8 feet, and a vertical reach of up to 16 feet. The unit must be compatible with skid steers having a minimum operating weight of 6,500 lbs and feature a greaseable direct drive system with a piston motor rated 17–30 GPM operating up to 4,000 PSI with case drain required. Required construction includes a 3-inch by 16-inch tilt cylinder, a heavy-duty 5/8-inch thick blade carrier equipped with two double-sided 5/8-inch thick AR400 steel blades, and a protective push bar. The unit weighs approximately 1,203 lbs. The procurement mandates Buy American Act compliance. The NAICS code is 333120, Construction Machinery Manufacturing; the PSC code is 3805, Earth Moving and Excavating Equipment. Specifications are attached.
Notice text
Brand name or equal product to the Blue Diamond Skid Steer Swing Arm Brush Cutter designed for versatile vegetation management, including cutting banks, right-of-ways, fence lines, and maintaining trails. To be considered an acceptable equivalent, any proposed equal unit must feature a 44-inch cutting width, a minimum 4-inch material cutting capacity, a horizontal reach of at least 8 feet, and a vertical reach of up to 16 feet. The unit must be compatible with skid steers having a minimum operating weight of 6,500 lbs and feature a greaseable direct drive system with a 17?30 GPM piston motor (approx. 1,203 lbs) operating up to 4,000 PSI (case drain required). Rugged construction is mandatory, requiring a 3 inch x 16 inch tilt cylinder, a heavy-duty 5/8-inch thick blade carrier equipped with two double-sided 5/8-inch thick AR400 steel blades, and a protective push bar. Must have piston motor. Must be Buy American Act Compliant. See attached specifications.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| CID Skid Steer Swing Boom Brush Cutter Attachment 17-30 GPM, PISTON MOTOR SWING BOOM (SBCNS) | Forest Service | Total Small Business | |
| Tractor | MICC Fort Drum | Total Small Business | |
| Diesel Forklift | MICC Fort Drum | Total Small Business | |
| HY-rail light duty truck | MICC Fort Drum | Total Small Business | |
| Forest Improvement Herbicide- Fort Drum | MICC Fort Drum | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity