Surveying Hardware – Trimble R980 GNSS System
Closed Pre-Solicitation Posted
- Solicitation number
- PANMCC-26-P-0000038980
- Agency
-
MICC Fort Hood
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 811210 Electronic and Precision Equipment Repair and Maintenance
- PSC
- 6655 Geophysical Instruments
- Place of performance
- Fort Hood, Texas 76544, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Hood is seeking to procure a Trimble R980 GNSS (Global Navigation Satellite System) receiver system for Fort Hood, Texas. This sources sought notice is issued solely for information and planning purposes to gauge market capability among small businesses and does not constitute a formal solicitation such as an RFQ, IFB, or RFP. The R980 system is a high-precision positioning receiver featuring advanced hardware components including a Trimble ProPoint GNSS Engine, dual-band UHF radio capabilities, 4G LTE modem connectivity, IP67 waterproof/dustproof rating, and 9.5 GB internal data logging memory with 20 Hz positioning rates. The equipment must meet MIL-STD-810G durability standards and deliver RTK precision of 8 mm horizontal and 15 mm vertical accuracy, along with RTX precision of 2 cm horizontal and 3 cm vertical. Responses are due by February 9, 2026, and interested parties should monitor the Government-wide Point of Entry for any future formal solicitation.
This procurement is designated as a Total Small Business set-aside, and the government will only formalize the set-aside if two or more qualified small businesses respond with sufficient capability information, including those in the 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, and Women-Owned Small Business categories. The anticipated NAICS code is 811210 (Electronic and Precision Equipment Repair and Maintenance) with a size standard of $34,000,000, and the PSC category is 6655 (Geophysical Instruments). This is a single-time delivery requirement, and no specific budget range or award value has been disclosed in the sources sought notice. The government will not accept unsolicited proposals, quotes, bids, or pay for any administrative costs incurred in response to this notice, and all submissions will not be returned to respondents. If a formal solicitation is issued, it will be posted on the Government-wide Point of Entry.
Notice text
THIS IS A Sources Sought Notice ONLY.
The U.S. Government desires to procure a Trimble R980 GNSS receiver system for Fort Hood, Texas on a small business set-aside basis, provided 2 or more qualified small businesses respond to this sources sought notice with information sufficient to support a set-aside. Be advised that the U.S. Government will not be able to set aside this requirement if 2 or more small businesses do not respond with information to support the set-aside. We encourage all small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women-Owned Small Business concerns), to identify their capabilities in meeting the requirement at a fair market price.
This notice is issued solely for information and planning purposes – it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittal will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Government wide Point of Entry. It is the responsibility of potential offerers to monitor the Government wide Point of Entry for additional information pertaining to this requirement.
The anticipated NAICS code(s) is: 811210, Electronic and Precision Equipment Repair and Maintenance, with a size standard of $34,000,000. This is a single time delivery. Attached are the salient characteristics that are required for the procurement.
In response to this sources sought, please provide: 1. Limit responses to 5 pages and include the following additional information: name of the firm, point of contact, phone number, email address, Entity Identifier (UEI), Commercial and Government Entity (CAGE) code, a statement regarding small business status (including small business type(s)/ certifications(s) such as SDB, 8(a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code. 2. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any. 3. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination. [Tailor the information requested to the requirement, e.g. lead time for implementation, proposed solution, alternative solution, security clearances, bonding requirements, etc., as applicable.] 4. Information to help determine if the requirement is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc. 5. Identify how the Army can best structure these contract requirements to facilitate competition by and among small business concerns. 6. Identify any condition or action that may be having the effect of unnecessarily restricting competition with respect to this acquisition. Please contact the MICC Advocate for Competition, Scott Kukes, at scott.d.kukes.civ@mail.mil or 210-466-3015, if you believe that this action is unreasonably restricting competition. Include the subject of the acquisition, this announcement, and the MICC POC information from the FedBizOpps notice. Provide the specific aspects that unreasonably restrict competition and the rationale for such conclusion. 7. Recommendations to improve the salient characteristics to acquiring the identified items/services. 8. Interested parties are requested to submit a capabilities statement. The deadline for response to this request is no later than (09 February 2026 at 1:00 p.m Central time). All responses under this Sources Sought Notice must be e-mailed to SSG Anthony Sullivan, anthony.j.sullivan35.mil@army.mil.
Files
| File | Type | Posted |
|---|---|---|
| SALIENT CHARACTERISTICS-R980 Trimble Hardware.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| GPS Survey Equipment and Related Accessories | Air Combat Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity