Stryker Part Task Trainer (PTT) –Common Remotely Operated Weapon Station - Javelin (CROWS-J) Maintenance Trainer
Closed Special Notice Posted
- Agency
-
ACC Orlando
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- Place of performance
- Orlando, Florida 32826, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
This Special Notice, issued by the Department of the Army Materiel Command Contracting Command Orlando on February 17, 2026, seeks market intelligence regarding the development of a Stryker Part Task Trainer (PTT) for the Common Remotely Operated Weapon Station-Javelin (CROWS-J). The CROWS-J is a critical weapon system upgrade for the U.S. Army's Stryker fleet that enables crews to engage armored threats using the FGM-148 Javelin missile from within the vehicle's interior. This Request for Information (RFI) is issued on an informational basis only and does not constitute a formal solicitation or commitment by the government to award a contract. The notice is directed to the Product Director Virtual Training Systems and seeks various development approaches for trainer systems. No funds are currently available for responses, and all submissions are strictly voluntary in nature.
The primary objective of this RFI is to gather industry input on the feasibility and technical approaches for developing a high-fidelity, non-instrumented physical replica of the CROWS-J weapon station suitable for classroom training environments. The government seeks to understand how industry can support the maintenance training infrastructure that depends on soldiers' proficiency with this sophisticated system, which integrates a stabilized mount, sensor suite including thermal and daytime cameras, a laser rangefinder, and fire control software. Responses are due by March 10, 2026, though this deadline applies only to voluntary submissions for information gathering purposes. There are no specific eligibility restrictions mentioned, allowing interested contractors and industry partners to submit their technical and developmental insights. Since this is a sources sought notice rather than a formal solicitation, respondents should understand that submissions are non-binding and do not guarantee future contract opportunities.
Notice text
2 versions
Update #2 · Latest ·
REQUEST FOR INFORMATION
DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS ANNOUNCEMENT IS STRICTLY VOLUNTARY.
- Background and Purpose
The Common Remotely Operated Weapon Station-Javelin (CROWS-J) provides a critical lethality and survivability upgrade for the U.S. Army's Stryker fleet, enabling crews to engage armored threats with the FGM-148 Javelin missile from the safety of the vehicle's interior. The operational readiness of this sophisticated system is directly dependent on the proficiency of its maintenance personnel. Stryker Part Task Trainers (PTT) are a vital element of the Army's maintenance training infrastructure, providing high-fidelity, full-scale representations of specific subsystems. This established approach allows soldiers to physically access hardware components to practice hands-on maintenance tasks, ensuring they can keep complex equipment mission ready. The CROWS-J is a stabilized mount that integrates a sophisticated sensor suite and fire control software. This allows for on-the-move target acquisition and engagement, day or night. The sensor package includes a daytime video camera, a thermal camera, and an eye-safe laser rangefinder.
This Request for Information (RFI) seeks market intelligence information from industry for various development approaches for the CROWS/J trainer systems for Product Director Virtual Training Systems. The trainer is a high-fidelity, physical replica of the operational CROWS-J weapon station, designed for a classroom environment. It is a "non-instrumented" system, meaning it does not include the software, sensors, or operational capabilities of a tactical unit. Its sole function is to serve as a hands-on, mechanical training device. The system is mounted on a stationary base to provide 360-degree access for students. It is "hardened" with reinforced components to withstand the repeated assembly and disassembly required in a training setting.
The overall goal of this project is to provide a realistic, hands-on training device for the Army Ordnance School to support maintenance training for fielding in Fiscal Year 2026.
2.0 Scope of Requirements
The Government is seeking a commercial, non-Government Furnished Property (non-GFP) solution for a maintenance training system. The vendor shall propose a comprehensive solution to meet the following requirements:
- The trainer shall comply with the characteristics of the Common Remotely Operated Weapon Station, Javelin (CROWS-J) system.
- The trainer shall provide stability, dimensions, weight and height to perform part task training in a classroom.
- The trainer shall provide cable hardened, and Helicoil components to prevent damage from frequent connection, disconnection, and handling.
- The trainer shall be designed to endure repeated disassembly and reassembly by students.
- The trainer shall provide the capability to replace and remove parts for muscle memory capacitation.
2.1 Core Functionality
The trainer must be a high-fidelity physical replica of the CROWS-J system, designed specifically to facilitate maintenance and parts-replacement training. Ten (10) non-instrumented PTT trainers are required and must provide the necessary physical environment for a soldier to successfully perform all maintenance procedures as outlined in the Interactive Authority Display Software (IADS) task list in Appendix A.
2.2 Durability and Hardening
The trainer must be a hardened, robust system capable of withstanding the rigors of repeated and continuous use in a classroom training environment. The hardening shall include, but is not limited to:
- Reinforced Cabling: All cables and connectors must be reinforced to prevent damage from frequent connection, disconnection, and handling.
- High-Wear Threaded Connections: Helicoil inserts or similar hardened solutions must be used for all bolts and fasteners that are frequently removed and re-installed during training tasks.
- Structural Integrity: The system must be designed to endure repeated disassembly and reassembly by students.
3.0 Information Requested from Industry
Interested parties are requested to respond with a capabilities solution that addresses the following areas:
3.1 Company Experience and Past Performance
- Describe your company’s experience with projects of similar size, scope, and complexity, particularly those involving the Department of Defense (DoD), or other Federal, State, or Academic Institutions.
- Provide specific examples of at least three (3) relevant projects completed within the last five years. The Government may request to inspect these examples to substantiate experience.
3.2 Business Information
- Company Name, Address, and website.
- Verify that you are a U.S. business entity.
- State your business size/category (e.g., Large Business, Small Business, 8(a), Woman-Owned Small Business, etc.).
- What NAICS would you recommend for this requirement and why?
- Please list your potential teaming partners/subcontractors with their UEI and CAGE and estimate by percentage how much work you plan to subcontract to them.
- Provide your CAGE code, primary NAICS code(s), and primary Product and Service Codes (PSC) that identify your business capabilities.
- Provide contact information for key personnel (Name, Title, Phone, Email).
3.3 Technical Capability
- Briefly describe your technical approach to meeting the requirements outlined in Section 2.0.
- Describe your company's capabilities and facilities related to design, engineering, manufacturing, and quality assurance for this type of project.
- Does your company have the capability to self-perform all the required elements in this draft document?
- Do you provide this service and/or product commercially?
3.4 Rough Order of Magnitude (ROM) Pricing
Provide a non-binding ROM price estimate to accomplish the requirements detailed in Section 2.0. The ROM should be broken down into major cost drivers (e.g., engineering, manufacturing, materials, shipping).
3.5 Legal & Certifications
- Acknowledge that the vendor is responsible for acquiring and maintaining any certifications or legal requirements necessary to conduct business with the U.S. Government.
4.0 Response Instructions
- Responses to this RFI are due no later than the date and time specified above.
- Responses shall not exceed 10 pages, excluding any cover pages or tables of contents.
- Responses must be submitted in PDF format via email to the POC listed in Section 5.0.
- The subject line of the email should read: "RFI Response: Stryker PTT- Common Remotely Operated Weapon Station - Javelin (CROWS-J) Maintenance Trainer ".
5.0 Government Point of Contact
All responses and questions regarding this RFI should be directed to:
ACC-Orlando Representative
Reginald Caldwell
Contract Specialist
Reginald.k.caldwell.civ@army.mil
Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions.
Update #1 ·
REQUEST FOR INFORMATION
DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS ANNOUNCEMENT IS STRICTLY VOLUNTARY.
- Background and Purpose
The Common Remotely Operated Weapon Station-Javelin (CROWS-J) provides a critical lethality and survivability upgrade for the U.S. Army's Stryker fleet, enabling crews to engage armored threats with the FGM-148 Javelin missile from the safety of the vehicle's interior. The operational readiness of this sophisticated system is directly dependent on the proficiency of its maintenance personnel. Stryker Part Task Trainers (PTT) are a vital element of the Army's maintenance training infrastructure, providing high-fidelity, full-scale representations of specific subsystems. This established approach allows soldiers to physically access hardware components to practice hands-on maintenance tasks, ensuring they can keep complex equipment mission ready. The CROWS-J is a stabilized mount that integrates a sophisticated sensor suite and fire control software. This allows for on-the-move target acquisition and engagement, day or night. The sensor package includes a daytime video camera, a thermal camera, and an eye-safe laser rangefinder.
This Request for Information (RFI) seeks market intelligence information from industry for various development approaches for the CROWS/J trainer systems for Product Director Virtual Training Systems. The trainer is a high-fidelity, physical replica of the operational CROWS-J weapon station, designed for a classroom environment. It is a "non-instrumented" system, meaning it does not include the software, sensors, or operational capabilities of a tactical unit. Its sole function is to serve as a hands-on, mechanical training device. The system is mounted on a stationary base to provide 360-degree access for students. It is "hardened" with reinforced components to withstand the repeated assembly and disassembly required in a training setting.
The overall goal of this project is to provide a realistic, hands-on training device for the Army Ordnance School to support maintenance training for fielding in Fiscal Year 2026.
2.0 Scope of Requirements
The Government is seeking a commercial, non-Government Furnished Property (non-GFP) solution for a maintenance training system. The vendor shall propose a comprehensive solution to meet the following requirements:
- The trainer shall comply with the characteristics of the Common Remotely Operated Weapon Station, Javelin (CROWS-J) system.
- The trainer shall provide stability, dimensions, weight and height to perform part task training in a classroom.
- The trainer shall provide cable hardened, and Helicoil components to prevent damage from frequent connection, disconnection, and handling.
- The trainer shall be designed to endure repeated disassembly and reassembly by students.
- The trainer shall provide the capability to replace and remove parts for muscle memory capacitation. (See Appendix A for details)
2.1 Core Functionality
The trainer must be a high-fidelity physical replica of the CROWS-J system, designed specifically to facilitate maintenance and parts-replacement training. Ten (10) non-instrumented PTT trainers are required and must provide the necessary physical environment for a soldier to successfully perform all maintenance procedures as outlined in the Interactive Authority Display Software (IADS) task list in Appendix A.
2.2 Durability and Hardening
The trainer must be a hardened, robust system capable of withstanding the rigors of repeated and continuous use in a classroom training environment. The hardening shall include, but is not limited to:
- Reinforced Cabling: All cables and connectors must be reinforced to prevent damage from frequent connection, disconnection, and handling.
- High-Wear Threaded Connections: Helicoil inserts or similar hardened solutions must be used for all bolts and fasteners that are frequently removed and re-installed during training tasks.
- Structural Integrity: The system must be designed to endure repeated disassembly and reassembly by students.
3.0 Information Requested from Industry
Interested parties are requested to respond with a capabilities solution that addresses the following areas:
3.1 Company Experience and Past Performance
- Describe your company’s experience with projects of similar size, scope, and complexity, particularly those involving the Department of Defense (DoD), or other Federal, State, or Academic Institutions.
- Provide specific examples of at least three (3) relevant projects completed within the last five years. The Government may request to inspect these examples to substantiate experience.
3.2 Business Information
- Company Name, Address, and website.
- Verify that you are a U.S. business entity.
- State your business size/category (e.g., Large Business, Small Business, 8(a), Woman-Owned Small Business, etc.).
- What NAICS would you recommend for this requirement and why?
- Please list your potential teaming partners/subcontractors with their UEI and CAGE and estimate by percentage how much work you plan to subcontract to them.
- Provide your CAGE code, primary NAICS code(s), and primary Product and Service Codes (PSC) that identify your business capabilities.
- Provide contact information for key personnel (Name, Title, Phone, Email).
3.3 Technical Capability
- Briefly describe your technical approach to meeting the requirements outlined in Section 2.0.
- Describe your company's capabilities and facilities related to design, engineering, manufacturing, and quality assurance for this type of project.
- Does your company have the capability to self-perform all the required elements in this draft document?
- Do you provide this service and/or product commercially?
3.4 Rough Order of Magnitude (ROM) Pricing
Provide a non-binding ROM price estimate to accomplish the requirements detailed in Section 2.0. The ROM should be broken down into major cost drivers (e.g., engineering, manufacturing, materials, shipping).
3.5 Legal & Certifications
- Acknowledge that the vendor is responsible for acquiring and maintaining any certifications or legal requirements necessary to conduct business with the U.S. Government.
4.0 Response Instructions
- Responses to this RFI are due no later than the date and time specified above.
- Responses shall not exceed 10 pages, excluding any cover pages or tables of contents.
- Responses must be submitted in PDF format via email to the POC listed in Section 5.0.
- The subject line of the email should read: "RFI Response: Stryker PTT- Common Remotely Operated Weapon Station - Javelin (CROWS-J) Maintenance Trainer ".
5.0 Government Point of Contact
All responses and questions regarding this RFI should be directed to:
ACC-Orlando Representative
Reginald Caldwell
Contract Specialist
Reginald.k.caldwell.civ@army.mil
Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions.
Files
| File | Type | Posted |
|---|---|---|
| Appendix A.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity