Strain gage measurement
Closed Solicitation Posted
- Solicitation number
- 70Z04026Q60218Y00
- Agency
-
Coast Guard
Department of Homeland Security
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541330 Engineering Services
- Place of performance
- Curtis Bay, Maryland 21226, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Coast Guard, Surface Forces Logistics Center seeks strain gage measurement services for the USCGC Eagle vessel, with quotes due September 18, 2026 at 12:00 PM Eastern Time. This is a Total Small Business set-aside procured as a Firm Fixed Price Purchase Order under FAR 13 simplified acquisition procedures on a best value basis.
Place of performance is Curtis Bay Industrial Area, Baltimore, Maryland. Work begins September 21, 2026 and includes installation of instrumentation to measure dockside strain gage alignment and quantify loading on each bearing, with results compared to previous vessel measurements. The contractor must provide a Qualified Technical Representative experienced with shaft alignment by strain gage method to conduct alignment inspections at four critical phases: prior to drydocking (afloat), after drydocking but before repairs, after all repairs are completed, and after refloating. The contractor furnishes and installs all strain gage equipment, measures vertical and horizontal bearing reactions on all propulsion shaft bearings, and submits written reports within 24 hours of each alignment check with comparative analysis identifying substantive changes in loading or trends.
All contractor personnel require RAPIDGate Program registration or TWIC credentials for repeat access (7+ days annually). The contractor must comply with OSHA shipyard industry standards (29 CFR 1915), hold ISO 9001 and ISO 14001 certifications, and provide all personnel safety equipment. Environmental compliance with EPA regulations and Coast Guard Yard environmental plans is mandatory; the contractor assumes full responsibility for transport and disposal of all materials. The NAICS code is 541330, Engineering Services. Payment is made by Government Purchase Order Net 30; vendor assumes financial responsibility until Coast Guard acceptance and receipt. Quotes shall be emailed to Shellby.M.Hammond@uscg.mil with solicitation number 2126406Y6176J96012 in the subject line.
Notice text
This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR and as supplemented with additional information included in this notice. This announcement constitutes only solicitation; quotes are being requested and a separate written solicitation will not be issued.
Solicitation number 2126406Y6176J96012 applies and is used as a Request for Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2024-05, dated 22 May 2024. It is anticipated that a competitive price purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency.
The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. No down payments or advanced payments will be made to the awarded vendor. Vendor shall ensure they can secure funding for this order until delivered and received by the US Coast Guard. Payment will be made by Government Purchase order (Net 30) and the vendor shall assume financial responsibility until the order is accepted and received by US Coast Guard. Payment of the work is authorized to be submitted as work is completed but must be approved by the Contracting Officer First.
Basis for Award: This solicitation is based on FAR 13 – Simplified Acquisition Procedures and quotes will be reviewed and awarded on a Best Value basis per the solicitation. Past performance will only be reviewed for “responsibility” basis per FAR 9.1. The evaluation criteria for the quote’s will be who meets all the technical requirements, who meets our deadlines and price.
All quotes shall be emailed to Shellby Scotton via Shellby.M.Hammond@uscg.mil and shall be received no later than 09/18/2026 at 1200 (Eastern). All emailed quotes shall have 2126406Y6176J96012 in the subject of the email.
If a Site Visit is required in order to bid, please email ANTHONY SAYWARD via Anthony.E.Sayward@uscg.mil in order to schedule.
Vendor Information:
Entity Name
Entity Unique Entity ID
Entity Address
Entity POC
Entity Phone Number
POC Email Address
Vendor shall provide:
Line 1:
DESCRIPTION: STRAIN GAUGE MEASUREMENT PRE-DOCK. SEE ATTACHED SOW.
Unit of Issue: 1 JB
Line Total:
Estimated Performance Date:
*All Work must be completed in accordance with the attached Statement of Work for the order.
*Access to some drawings may be Export-Controlled and require any recipient to be registered in the Joint Certification Program (JCP) through DLA to receive the drawing. *
* Period of performance will start on 9/21/26, then the remaining measurements will take place in Baltimore MD, TBD*
Place of Performance:
U.S. COAST GUARD YARD
2401 HAWKINS POINT ROAD
BALTIMORE, MD 21226
Invoicing In IPP
It is a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov.
All invoices must contain the following information: CG Purchase Order number, vendor’s invoice number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON PO IN IPP). Shipping costs will be indicated as a separate line item on the invoice (if applicable). Shipping cost $100 or more must be accompanied by a separate freight invoice when submitting an invoice(s) for payment (if applicable).
To submit an invoice, vendor must have access to www.ipp.gov. To gain access please indicate if you don’t have an account So the issuing office can establish one for you.
FAR Clauses
This order is subject to but is not limited to the following Federal Acquisition Regulations:
52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.
52.204-26 Covered Telecommunications Equipment or Services-Representation.
52.212-1 Instructions to Offerors—Commercial Products and Commercial Services.
52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services.
52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.
52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.
52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services.
52.222-90 Addressing DEI Discrimination by Federal Contractors
Files
| File | Type | Posted |
|---|---|---|
| Eagle Strain Gage SOW.docx | DOCX document | |
| Eagle Strain Gauge WI.pdf | ||
| FAR CLAUSES.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Strain gage measurement | — | Total Small Business | |
| Drydock repairs for the CGC anvil | — | Total Small Business | |
| Dock-side (DS): USCGC WAESCHE Quarter 2 FY27 Repair | — | No set-aside | |
| FRAME ASSY, MR Pylon | Coast Guard | No set-aside | |
| USCGC alder DD FY27 | — | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity