Standards Enforcement Program for FMVSS No. 209, "Seatbelt Assemblies
Closed Solicitation Posted
- Solicitation number
- 693JJ923R000145
- Agency
-
National Highway Traffic Safety Administration
Department of Transportation
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 541380 Testing Laboratories and Services
Notice details come from SAM.gov. Updated .
About this opportunity
The contractor is required to provide personnel, facilities, materials, supplies, equipment, and services for the procurement, inspection, compliance testing, and reporting of seat belt assemblies in accordance with FMVSS No. 209. The testing may vary depending on the design and construction of each assembly, and may require different hardware, safety handling for pyrotechnics, or disabling of automatic locking features. The contractor will also prepare and submit various documents and reports, and cooperate with the NHTSA Contracting Officer’s Representative in case of test failures.
Products and Services to be provided:
- Qualified personnel for testing and inspection.
- Facilities and equipment for testing seat belt assemblies.
- Materials and supplies for testing.
- Compliance testing and reporting of seat belt assemblies.
- Preparation and submission of various documents and reports.
Notice text
The Contractor shall furnish the necessary qualified personnel, facilities, materials, supplies, equipment, and services to perform work associated with the procurement, inspection, compliance testing, and compliance test reporting of seat belt assemblies, provided to the Contractor as Government Furnished Test Items (GFTI), or purchased by the Contractor as Contractor Purchased Test Items (CPTI) as specified in the contract, with the applicable requirements of FMVSS No. 209, Seat Belt Assemblies.
Seat belt assembly testing may vary from model to model depending on the design and construction of each assembly. For example, each assembly may require different hardware to set up the test item for testing; some test items may contain pyrotechnics that require appropriate safety handling and precautions; or some test items may contain an automatic locking feature which may require disabling for certain cycle testing.
The Contractor shall conduct the tests in accordance with the procedures specified in Section C.6.5 and the test schedule f C.6.4. The Contractor shall prepare and submit Preliminary Documents, Monthly Status Reports, Notification of Test Failure and Interim Failure Reports, and Final Test Reports as specified in Sections C.6.6 and F.7.
When test failures are identified, the NHTSA Contracting Officer’s Representative (COR) will contact the Contractor and request information to support its investigation of the test results and may request an onsite visit to review testing and results with or without the manufacturer present.
Files
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Solicitation | |
| Standards Enforcement Program for FMVSS No. 209, "Seatbelt Assemblies" | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Full Scale Vehicle Crashworthiness Testing and Side Air Bag Out-of-Position Testing for the New Car Assessment Program (NCAP) | National Highway Traffic Safety Administration | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity