Speed Sensor, Turbin (Please refer to the Description/Synopsis and/or Place of Performance for POC on this effort)

DESCRIPTION: THE PURPOSE OF THIS MODIFICATION IS TO DECREASE THE QUANTITIES FROM 110 EACH YEAR TO A NEW TOTAL OF 36 EACH YEAR AND CHANGE POC FROM JENNIFER WEAVER, CONTRACTING OFFICER TO ROBERT FLANAGAN, CONTRACT SPECIALIST. ALL OTHER TERMS AND CONDITIONS REMAIN THE SAME.

****ATTENTION****ALL FORMAL COMMUNICATION RELATED TO THIS ACQUISITION MUST BE DIRECTED TO: Robert Flanagan, Contract Specialist, email: robert.b.flanagan.civ@mail.mil. No telephone calls will be accepted. PRON: AX4T6016AX; NOUN: Speed Sensor, Turbin; NSN: 6680-01-461-4684; P/N: 2-161-690-02; minimum qty of 36 and maximum qty of 36 each on a five year Indefinite Delivery Indefinite Quantity (IDIQ) type contract with deliveries to New Cumberland, PA. Required delivery is 36 each 150 DACA and up to 36 each year until contract completion. This requirement is restricted to Honeywell International, Inc. (CAGE: 99193) because the data needed to purchase this part competitively is not physically available, it cannot be obtained economically, nor is it possible to draft adequate specifications. Adequate technical data is not available for this acquisition. All offerors must meet prequalification requirements in order to be eligible for award. All prospective manufacturers, or distributors, seeking to compete for a solicitation for Aviation and Missile Life Cycle Management Command (AMCOM) Spares, for any restricted source parts, are required to be an AMCOM approved source. To obtain approval, vendors must submit a SAR package, for review and approval, to the Engineering Directorate (ED), Quality Engineering Division. Source approval must be obtained prior to being considered for contract award. Approvals are made on an individual part number basis for a specific manufacturing location (CAGE). Firms are encouraged to seek source approval in order to compete for future solicitations by following the SAR submission guidance provided on the website: http://amcomdmz.redstone.army.mil/casl_cmo/casldba.casl_cmo_samsar.
Questions concerning SAR submissions can be directed to the ED SAR Team at
EDSAR@amrdec.army.mil or call the SAR Team at 256-313-8978, 256-313-0341 or 256-313-8994. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release of solicitation however; solicitation will not close prior to the closing date stated above. Foreign firms are reminded that all requests for solicitation must be processed through their respective embassies.

****ATTENTION****ALL FORMAL COMMUNICATION RELATED TO THIS ACQUISITION MUST BE DIRECTED TO: Jennifer Weaver, Contracting Officer, email: jennifer.a.weaver12.civ@mail.mil. No telephone calls will be accepted. PRON: AX4T6016AX; NOUN: Speed Sensor, Turbin; NSN: 6680-01-461-4684; P/N: 2-161-690-02; minimum qty of 110 and maximum qty of 550 each on a five year Indefinite Delivery Indefinite Quantity (IDIQ) type contract with deliveries to New Cumberland, PA. Required delivery is 110 each 150 DACA and up to 110 each year until contract completion. This requirement is restricted to Honeywell International, Inc. (CAGE: 99193) because the data needed to purchase this part competitively is not physically available, it cannot be obtained economically, nor is it possible to draft adequate specifications. Adequate technical data is not available for this acquisition. All offerors must meet prequalification requirements in order to be eligible for award. All prospective manufacturers, or distributors, seeking to compete for a solicitation for Aviation and Missile Life Cycle Management Command (AMCOM) Spares, for any restricted source parts, are required to be an AMCOM approved source. To obtain approval, vendors must submit a SAR package, for review and approval, to the Engineering Directorate (ED), Quality Engineering Division. Source approval must be obtained prior to being considered for contract award. Approvals are made on an individual part number basis for a specific manufacturing location (CAGE). Firms are encouraged to seek source approval in order to compete for future solicitations by following the SAR submission guidance provided on the website: http://amcomdmz.redstone.army.mil/casl_cmo/casldba.casl_cmo_samsar.
Questions concerning SAR submissions can be directed to the ED SAR Team at
EDSAR@amrdec.army.mil or call the SAR Team at 256-313-8978, 256-313-0341 or 256-313-8994. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release of solicitation however; solicitation will not close prior to the closing date stated above. Foreign firms are reminded that all requests for solicitation must be processed through their respective embassies.