Specialized Fueling Systems Pump
Closed Pre-Solicitation Posted
- Solicitation number
- W50S8L24R0004
- Agency
-
Army National Guard
Department of the Army, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333914 Measuring, Dispensing, and Other Pumping Equipment Manufacturing
- Place of performance
- Louisville, Kentucky 40213, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army National Guard's Kentucky Air National Guard's Contingency Response Squadron is seeking a vendor to supply a Specialized Fueling Systems Pump. The pump must meet several performance requirements, including a split-system designed modular fuel distribution, a fuel pump/motor assembly weighing less than 250 lbs (dry), a multi-fuel diesel engine, a 200 GPM (single port) or 100 GPM (dual port) pump, a filter assembly weighing less than 250 lbs (dry), and various other features. The evaluation criteria and award decision will be based on the vendor's ability to meet these technical requirements.
This procurement is set aside for small businesses. No incumbents or current contractors are named, and the pre-solicitation notice does not provide any information about the potential award value or budget range. The solicitation is open for responses until June 21, 2024.
Notice text
The Kentucky Air National Guard's Contingency Response Squadron is look for a vendor that can supply a Specialized Fueling Systems Pump with the following characteristics:
Performance Requirements
-Split-System designed modular fuel distribution built within skeleton cages
-Fuel Pump/Motor Assembly weighs less than 250lbs (dry)
-Multi-Fuel diesel engine
-Engine can be fueled by filter system
-Pull-to-start engine w/ no battery
-200GPM (single port) or 100GPM (dual port) pump
-Filter Assembly weighs less than 250lbs (dry)
-Filter elements remove contaminates down to 1 micron and coalesce water from fuel
-Two (2) 2” outlets to deliver fuel at 200GPM total throughput
-Two (2) 2” inlets to receive fuel
-Engine to Pump connections may be 3”
-Drains on filters and connectors to defuel
-All removable connectors must be quick connect
-Must have sample ports after filter assembly
-Flat Dark Earth finish
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Pump unit, centrifug | Aviation | No set-aside | |
| Pump, hand, fuel pump | Land and Maritime | Service-Disabled Veteran-Owned Small Business | |
| Pump, MSW | Naval Supply Systems Command | No set-aside | |
| Fuel Dispenser Maintenance | MICC Fort Drum | Total Small Business | |
| Pump unit, centrifugal | Land and Maritime | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity