SPE4A8-25-Q-0026 - CNC Controller Components for a 2 Axis Lodge & Shipley Lathe Machine Retrofit
Closed Pre-Solicitation Posted
- Solicitation number
- 7009473131
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333515 Cutting Tool and Machine Tool Accessory Manufacturing
- PSC
- Not on record
- Place of performance
- Mechanicsburg, Pennsylvania, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Aviation (DLA Aviation) is conducting market research to identify potential sources for a CNC Controller & Components retrofit for a 2 Axis Lodge & Shipley Lathe Machine. This sources sought notice seeks vendors capable of providing, installing, and training for the machine retrofit, with work to be performed in Mechanicsburg, PA. The procurement falls under NAICS code 333515 for Cutting Tool and Machine Tool Accessory Manufacturing. Interested parties must submit capability statements by December 23, 2024, at 2:00 PM EST via email to Chanel.Green@dla.mil, with responses limited to 10 single-sided pages using a minimum 10-point font. DLA Aviation Richmond intends to potentially award a sole source contract for this requirement, emphasizing the need for comprehensive installation and training capabilities.
There are no specific set-aside designations for this procurement, and no incumbent contractor is mentioned in the notice. The sources sought notice does not provide specific budget ranges or precise quantities for the CNC controller components. DLA Aviation will use the submitted responses to determine the most appropriate procurement method and identify vendors with the necessary capabilities to complete the machine retrofit. The project involves a complete retrofit including the CNC controller, components, installation, training, and foundation work. While the notice is primarily for market research purposes, it indicates the government's intent to proceed with a sole source contract for the lathe machine retrofit, suggesting a potentially targeted approach to selecting a vendor with specialized capabilities.
Notice text
The DLA-Aviation is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for a CNC Controller & Components for a 2 Axis Lodge & Shipley Lathe Machine Retrofit. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 333515.
THIS SOURCES SOUGHT IS FOR INFORMATION PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE/PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNIAL DESCRIPTION IS STRICTLY VOLUNTARY.
Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Submission Instructions: Interested parties should submit a response to this Sources Sought Notice by December 23, 2024, NLT 02:00 pm EST. All responses under this Sources Sought Notice must be emailed to Chanel.Green@dla.mil. Responses should be not exceed ten (10) one-sided 8.5 x 10-inch pages with a font that is no smaller than 10 point as this is not a request for a proposal but only a request for submission of a vendor's capability to perform this requirement.
DLA Aviation Richmond intends to award a sole source contract for a CNC Controller & Components for a 2 Axis Lodge & Shipley Lathe Machine Retrofit or equivalent and is seeking sources that can provide, install, and provide training for the machine. A foundation will be required with the contractor responsible for installation.
Interested parties that can provide the required CNC Controller & Components for a 2 Axis Lodge & Shipley Lathe Machine Retrofit with installation including training and foundations may identify their interest and capability to respond to this requirement no later than the stated closing date/time.
Place of performance is Mechanicsburg, PA.
Files
| File | Type | Posted |
|---|---|---|
| 25-65-1069 Sources Sought.docx | DOCX document |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| CCA, SBC, LDS, 4V, FC | Aviation | No set-aside | |
| Head, linear actuati // 1650-01-585-8779HS // 68A412808-1003 | Aviation | No set-aside | |
| Coordinate Measuring Machine (CMM) | Aviation | No set-aside | |
| SKI assembly, landing | Aviation | No set-aside | |
| Screw, machine | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity