Sources Sought Synopsis – ICBM MMIII Demilitarization
Closed Pre-Solicitation Posted
- Solicitation number
- FA8214DEMIL
- Agency
-
Nuclear Weapons Center
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336414 Guided Missile and Space Vehicle Manufacturing
- Place of performance
- Hill AFB, Utah, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Materiel Command Nuclear Weapons Center is seeking market research for the breakdown and washout of Minuteman III (MMIII) intercontinental ballistic missile boosters and solid rocket motor components. The work would include procuring equipment, performing facility modifications, and handling the disposal of Ammonium Perchlorate-laden waste streams. Key requirements include the capability to breakdown boosters as well as execute washout and chemical reclamation for the Stage I, II, and III motors. Respondents should provide a narrative addressing their intent to submit a proposal, relevant experience, and a proposed approach, along with a rough order of magnitude cost estimate. Responses are due by December 31, 2024 at 12:00 hours Mountain Standard Time.
This procurement is not set-aside. No information is provided on potential incumbent contractors or an anticipated award value. The applicable NAICS codes are 336414 (Guided Missile and Space Vehicle Manufacturing), 336415, and 325180, and the applicable PSC is 1337 (Guided Missile And Space Vehicle Explosive Propulsion Units, Solid Fuel; And Components).
Notice text
The purpose of this Sources Sought is for Market Research purposes only. No reimbursement will be made for any costs associated with providing information in response to this Sources Sought notice or on any follow up information requests.
The ICBM Systems Directorate at Hill AFB, requests letters of interest from qualified firms interested in performing work in support of the breakdown of fully built up MMIII boosters and/or washout of the Solid Rocket Motor (SRM) components of the MMIII Weapon System. This includes Stage I, II and III. Under this planned contract, the Contractor shall provide all labor, supervision, supplies, tools, materials, equipment, and incidental services required to execute and document results of breakdown and/or washout of the SRMs in support of the MMIII Mission.
The Stage I motor is roughly 54K lbs. 25 Ft. in length and the case consists of a D6AC Steel case. The Stage II motor is 15K Lbs., 14 ft. in length and the case consists of 6AL-4V Titanium. The Stage III is 8K lbs. 7.5ft. in length and made of fiberglass.
The type of work to be performed under this contract shall include but is not limited to:
Booster Breakdown and/or Washout of Existing Rocket Motor Casings:
- Procure all equipment required to meet washout, waste stream volume requirements and/or booster breakdown.
- Perform modifications to facilities or new facilities (if required) to accommodate.
- Install upgraded systems and equipment.
- Check-out system.
- Validate booster breakdown and rubble processing with MMIII Stages 1,2 & 3 motors including handling the Ammonium Perchlorate (AP) laden water.
- Ensure all waste streams adhere to local and federal standards to limit exposure to the environment
- Report/Documentation
Please include a narrative to answer each of the following questions: (Total number of pages shall not exceed 5, Times New Roman, 12pt.)
(1) Name of firm, address, point of contact, phone number, and email address.
(2) CAGE Code and DUNS number (if available)
(3) Your intent to submit a proposal for this project when it is formally advertised.
(4) Your firm’s capability to perform a contract of this complexity
- Include offeror's capability to breakdown boosters, execute washout, chemical reclamation, and capabilities for Stage I, II & III
- Include offeror’s capability to execute washout, chemical reclamation, and capabilities for Stage I, II & III, even if the capability to breakdown boosters does not exist
- Your experience with comparable work performed within the past ten (10) years:
- Brief description of the project, customer name, timeliness of performance, customer satisfaction, and dollar value of the project; no more than 3 examples of projects performed for review
- Proposed approach for the execution of the contract including sequencing and the identification of any impediments for execution (including the de-confliction of any conflicts of interest)
- Estimated Rough order of Magnitude (ROM) for the work to complete ~600 operational Booster systems
North American Industrial Classification System (NAICS) Codes applicable to this possible acquisition are 336414, 336415 & 325180.
Please submit responses to: Harry Fishleigh (Contracting Officer) or Joseph Merriam (Contract Specialist) via email at harry.fishleigh@us.af.mil, or joseph.merriam@us.af.mil no later than 31 December 2024 at 12:00 hours Mountain Standard Time.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| PIGA Float Assembly Repair Program | Nuclear Weapons Center | No set-aside | |
| Wing, Fin, Elevon Cartridges | AFLCMC Hill AFB | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity