Sole Source VectorNav Units
Closed Pre-Solicitation Posted
- Solicitation number
- 142082-26-0153
- Agency
-
National Oceanic and Atmospheric Administration
Department of Commerce
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334511 Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Place of performance
- Stennis Space Center, Mississippi 39529, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The National Oceanic and Atmospheric Administration (NOAA), through its Acquisition and Grants Office Eastern Acquisition Division in Kansas City, is procuring VectorNav VN-100T-CR Wave Sensors on a sole source basis under FAR 6.103-1 authority. These miniature, high-performance Inertial Measurement Units (IMUs) and Attitude Heading Reference Systems (AHRS) combine 3-axis accelerometers, gyros, and magnetometers into a single device designed for integration with National Data Buoy Center (NDBC) observation station equipment at Stennis Space Center, Mississippi. The sole source justification is based on NOAA's compatibility requirements with existing systems, as NDBC conducted market research and testing that demonstrated the VectorNav product's superior performance compared to two alternative solutions. The VectorNav sensors will replace obsolete Lord Microstrain 3DM-GX1 systems that are no longer in production, with NDBC having already modified its wave system interface firmware and completed initial lab and field testing to confirm proper operation. The pre-solicitation notice was posted on February 19, 2026, with a due date of March 6, 2026, though this appears to represent an early notice rather than a final proposal deadline.
This procurement involves no set-aside designation and represents a direct contract with VectorNav Technologies, the sole source supplier. The current operational systems utilize the Lord Microstrain 3DM-GX1 sensors, which NDBC intends to systematically replace with the VectorNav VN-100T-CR units across its operational tubes. The notice does not specify the exact quantity of units being procured or the total contract value. NDBC has already completed extensive testing and integration work, including mounting the new sensor in place of the older obsolete part within operational tubes and modifying necessary interface firmware. Procurement of the VectorNav product avoids additional costs that would be incurred if an alternative brand were selected, as such alternatives would require modifications to mounting hardware and interface firmware, while also ensuring NDBC can continue to meet its wave observation requirements without operational gaps.
Notice text
The National Oceanic and Atmospheric Administration’s (NOAA) Acquisition and Grants Office, Eastern Acquisition Division-Kansas City intends to negotiate and award a purchase order, on a sole source basis, under authority of RFO FAR 6.103-1, with VectorNav Technologies for VN-100T-CR Wave Sensors to be delivered/performed at Stennis Space Center, MS. The sole source determination is based on NOAA’s compatibility to existing systems or equipment.
Sole Source Justification:
NDBC conducted market research to find a suitable replacement that would fit the current configurations on their observation stations. Ultimately it was narrowed to three products. Tests at NDBC showed the
VectorNav VN100T-CR outperformed the other two products in those tests. NDBC intends to replace all of the old 3DM-GX1 systems with the VectorNav sensor.
The VectorNav VN100T-CR is a miniature, high-performance Inertial Measurement Unit (IMU) and Attitude Heading Reference System (AHRS). It combines 3-axis accelerometers, gyros, and magnetometers into one device. The sensor interfaces to NDBC equipment to process the sensor measurements into wave products. In prior years, the NDBC learned that Lord Microstrain was planning to cease production of the 3DM-GX1 sensor which is the NDBC’s present operational sensor. Since that time, the NDBC has modified its wave system interface firmware to read the VN100T-CR input data stream and performed initial lab and field tests to confirm proper operation. Now the NDBC has mounted the sensor in place of the older obsolete part inside the operational tube. These sensors being purchased will be used to modify operational tubes to use the new VN100T-CR sensor. If the VN100T-CR product is not procured, the NDBC will reach a point where it cannot meet its requirement for wave observations due to lack of functioning sensors. Should another brand be procured, the NDBC would have to modify mounting and interface firmware, thus incurring more costs. Tests already completed for the VN100T-CR would have to be re-conducted. This includes field testing. These tests are required to confirm proper operation and quality of the measurements. Thus, the cost to the government would greatly increase and wave observations at some stations may not be possible until the required testing could be completed.
This pre-solicitation notice is not a request for competitive proposals and no solicitation package is available. However, firms that believe they can fully meet the government's requirements may submit substantiating documentation or a request for additional information in writing to the (Contract Specialist) within 15 days after publication of this pre-solicitation notice. Such requests and documentation will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the government not to conduct a competitive procurement, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this pre-solicitation notice.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| VectorNav VN100T-CR Sensors - Brand Name, Single Source | National Oceanic and Atmospheric Administration | No set-aside | |
| Inertial measuring | Naval Supply Systems Command | No set-aside | |
| SPN-50 FY27 EDM Contract | Naval Air Systems Command | No set-aside | |
| Inertial measuring, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Innovasea Fish Tags and Acoustic Receivers | Engineer Research and Development Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity