Sole Source to Productive Engineering Systems Inc DBA American Stripping Company to Strip and paint the OSF Wet Pot and interior Railing. Per the attachment

Closed Solicitation Posted

Solicitation number
N61331-24-T-JK24
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Place of performance
Panama City Beach, Florida 32407, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The Naval Sea Systems Command, Naval Surface Warfare Center, Panama City Division (NSWC PCD) intends to award a sole source, firm fixed price purchase order using simplified acquisition procedures to Productive Engineering Systems, Inc., dba American Stripping Company (ASCO) for the stripping and painting of the Ocean Simulation Facility (OSF) Wet Pot and interior railing. This procurement is sole source as ASCO was previously contracted to test and determine the most effective coating solution to address severe corrosion issues in the Wet Pot. The justification cites that ASCO is the only company authorized by NAVFAC and NAVSEA for all hyperbaric chamber blasting, surface repair, and painting, and has a decade-long history of successfully applying specialized coatings to critical equipment for the government. The Government has determined that awarding this requirement to ASCO represents the best value and lowest overall cost to meet its needs.

This requirement is not set-aside. The main NAICS code is 332812 (Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers) and the PSC code is 8010 (Painting, Repair, or Alteration). The total estimated value of this sole source purchase order is above the micro-purchase level but not exceeding the simplified acquisition threshold of $250,000. The place of performance is P C BEACH, FL 32407, USA.

Notice text

                                         OCEAN SIMULATION FACILITY WET POT PAINT EFFORT

The Naval Surface Warfare Center Panama City Division, FL (NSWC PCD) intends to award a sole source, firm fixed price purchase order using simplified acquisition procedures to Productive Engineering Systems, Inc., dba American Stripping Company for the stripping and painting of the OSF Wet Pot and interior railing.  This procurement is sole source for the following reason:  NEDU, ASCO, and Sherwin Williams jointed developed a new coating system for NEDU’s Wet Pot chamber in the Ocean Simulation Facility (OSF) that addresses the severe corrosion issues that were not abated with the previous hyperbaric rated Carboguard 890H coating system. ASCO was contracted in FY23 through contract #N6133123P0089 to perform the coating tests and determine the most effective coating solution to reduce life cycle costs of NEDU dive systems. This coating system was tested IAW SS800-AG-MAN-010/P-9290 System Certification Procedures and Criteria Manual for Deep Submergence Systems for off gas constituents, diver life safety, and approved through Engineering Change Proposal (ECP) 24-002 between NEDU and NAVSEA 00C3/4. ASCO will utilize only the zinc-based primer and two-component, edge-retentive, ultra-high-solids epoxy amine coating engineered and developed for immersion service within the OSF Wet Pot. ASCO is the only company that have been authorized through NAVFAC and NAVSEA for all hyperbaric chamber blasting, surface repair, and painting. As such, only ASCO has the required knowledge and situational experience to perform the required tasking.  

Files

File Type Posted
C12 - Service_GFP_Clauses.pdf PDF
B8 - Redacted Sole Source Justification.pdf PDF

Similar open opportunities

Opportunity Agency Set-aside Responses due
Sealer, surface NAICS 325510 Naval Supply Systems Command No set-aside
Nonskid for naval ships/vessels Jacksonville, Florida 32228, United States · NAICS 336611 Naval Sea Systems Command Total Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors