Sole source – gas generator handling cart winch
Closed Pre-Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N0016420RGW05
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333923 Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Notice details come from SAM.gov. Updated .
About this opportunity
This notice seeks gas generator handling cart winches to be procured on a sole source basis from Advanced Machining Incorporated. Naval Surface Warfare Center Crane requires these winches as part of gas generator handling carts used to handle gas generators in support of sensitive government programs. Competition will not be conducted due to duplication of roughly $1.05 million in costs and a schedule impact of over 30 months associated with the government not owning the design information. Interested parties may submit capability statements by August 1st for consideration, though award remains at the government's discretion.
There is no set-aside designated for this procurement. The NAICS is 333923 and FSC is 3950. The identified sole source is Advanced Machining Incorporated of New Smyrna Beach, Florida. The government estimates avoiding $1.05 million in duplication costs through this sole source award. All responsible sources must register in SAM and may direct any questions to the point of contact by the August 1st closing date.
Notice text
N00164-20-R-GW05 – SOLE SOURCE – Gas Generator Handling Cart Winch – FSC 3950 – NAICS 333923
Issue Date: 02 July 2020 – Closing Date: 01 August 2020 – 2:00 PM EDT
Naval Surface Warfare Center (NSWC) Crane has a requirement for Gas Generator Handling Cart Winches. The hand-operated winches is a part of the Gas Generator Handling Cart (GGHC), which is used to handle gas generators. While the primary purpose is for material handling, the government’s requirements are much more stringent due to the program that it is supporting. The proposed contract action is for the supplies for which the Government intends to solicit and negotiate with one source, Advanced Machining Incorporated, New Smyrna Beach, FL 32168 (Cage Code 1WSC8), under the authority of 10 U.S.C. 2304(c)(1) as implemented by FAR 6.302-1. The basis for restricting competition is to avoid roughly $1.05 million in cost duplication and prevent more than 30 months schedule impact because the Government does not own the detailed design information.
All responsible sources may submit a capability statement which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220 or via the internet at https://www.sam.gov.
Contract Opportunities on https://beta.sam.gov/ has officially replaced FBO.gov
All changes that occur prior to the closing date will be posted to Contract Opportunities on https://beta.sam.gov/. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and / or award.
Questions or inquiries should be directed to Benjamin Harrison, Code 0221, telephone 812-854-6691, e-mail benjamin.harrison3@navy.mil. Please reference the above solicitation number when responding to this notice.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Sole source – gas generator handling cart winch | Award Notice | |
| Sole source – gas generator handling cart winch | Limited / Sole Source Justification | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Generator, aircraft, , in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Generator, variable, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| 58-CCA, engine control | Land and Maritime | No set-aside | |
| Winch, drum, hand operat | Construction and Equipment | Service-Disabled Veteran-Owned Small Business | |
| Support, winch | Construction and Equipment | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity