Smart Material Test Coupons for Improved Accelerated Laboratory and Operational Environment ConditionTesting
Closed Solicitation Posted
- Solicitation number
- AF112-218
- Agency
-
Warner Robins Air Logistics Complex
Air Logistics Complexes, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
Notice text
DoD SBIR topic AF112-218
Component: USAF
Command: WR-ALC
Phase: SBIR Program Phase I Action
Technology Areas: Materials
Keywords: Measurement systems; Accelerated testing
Objective:
Establish measurement systems and improved methods for evaluating the performance of coatings and alloy combinations in accelerated corrosion tests simulating and operational environment.
Description:
Corrosion related maintenance and repair of aircraft is a significant cost to the Air Force and adversely impacts safety and readiness. Selection and use of corrosion control materials for aircraft are based on environmental compliance and performance characteristics. In part, qualification of coatings is based on accelerated laboratory testing of flat painted panels with artificial defects (e.g. scribe). Flat panel test coupons do not subject the coating system and alloy to failure processes that may be of greatest significance in actual service environments, where galvanic couples, crevices or mechanical stresses may cause coating system breakdown and alloy corrosion. Corrosion and environmental resistance property tests, such as ASTM B117 salt spray, may yield results of no blistering nor scribe pitting after 2000 hours of exposure. These types of pass/fail results make comparative performance development studies difficult, provide little information on failure processes and progression, and only support the selection of materials that meet requirements, as opposed to the best material. Although advances have been made in the development of more representative accelerated corrosion test cycles over past decades (GM 9540P, ASTM G85, SAE J2334), test panel design and performance measurements have not substantially changed. There is a need to improve coatings and materials corrosion testing by leveraging advances in sensing and instrumentation to obtain high fidelity data on corrosion performance and degradation processes.
Improved testing and measurement systems will facilitate materials development, failure mechanism analysis and materials screening and characterization to reduce corrosion of aircraft structures. There is a critical need for improved accelerated laboratory and operational environment condition testing to more rapidly and accurately screen new materials and material combinations for use in military systems. Accelerated test methods would benefit from smart test coupons that can record the environmental exposure conditions for a given test, and assess, in situ, the amount of corrosion and state of the materials being tested. Also, an active smart coupon could provide dynamic measurements to track coating barrier properties and inhibitor effectiveness, as well as changes in mechanical properties and load bearing capacity of alloy or composite structural materials. A smart test coupon may induce mechanical loads to more realistically evaluate material service performance. A smart test coupon must be low cost, easy to assemble and prepare within a laboratory environment, and be durable enough to survive harsh environment testing. Finally, the capacity for real time data acquisition via wired or wireless interfaces in accelerated laboratory or operational environment condition tests is sought to provide on-demand automated recording of test conditions and results. Continuous data acquisition would enabling users to track test results and determine test coupon damage state at any point during a test cycle to aid in material comparisons.
Phase I:
Develop preliminary design for a smart test coupon system capable of measuring a range of corrosion damage modes associated with coated aircraft structures. Fabricate and assemble a breadboard prototype device and demonstrate the feasibility of detecting corrosion properties of coatings and alloys.
Phase II:
Finalize prototype system development and deliver a set of smart test coupons, wired and wireless interface devices, a data acquisition system, processing algorithms for property quantification, data storage and a user interface to demonstrate system performance in long-term accelerated corrosion tests and operational environment conditions.
Phase III:
DUAL USE COMMERCIALIZATION: Military Application: Accelerated corrosion testing technology would support rapid development, product improvement and qualification of high performance, environmentally compliant coatings for military applications.
Commercial Application: Smart test coupon technology would support the rapid development, product improvement and qualification of high performance, environmentally compliant coatings for commercial applications.
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity