Single Crystal Seal Preload Devices

Added: Aug 31, 2016 12:59 pm NASA/GRC has a requirement for Single Crystal Seal Preload Devices made from CMSX4 with a quantity of 3 includes the following tooling. One (1) Laue Fixture, 1 Assembly Fixture, 1 Sub-Assembly Fixture, 1 CMM Fixture and 1 Pattern Molding.

NASA/GRC intends to purchase the items from PCC Airfoils, LLC 3860 Union Avenue SE, Minerva, OH 44657. To maintain consistency of both quality and performance between previously purchased (from PCC Airfoils, LLC) and evaluated items, it is recommended that PCC Airfoils, LLC provide these items.

The Government intends to acquire a commercial item using FAR Part 12 and the Simplified Acquisition Procedures set forth and FAR Part 13.

The Sole Source is under the authority of FAR Reference 13.106-1(b)1.

Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 12:00 p.m. local time on September 7, 2016. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.

Oral communications are not acceptable in response to this notice.

NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .