Sheet Pile - Port of Nome

Closed Pre-Solicitation Posted

Solicitation number
W911KB25R0026A
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

NAICS code
331110 Iron and Steel Mills and Ferroalloy Manufacturing
PSC
9640 Iron And Steel Primary And Semifinished Products
Place of performance
Nome, Alaska, United States
Points of contact

Notice details come from SAM.gov. Updated .

About this opportunity

The US Army Corps of Engineers Engineering District Alaska is conducting a sources sought notice for flat web sheet pile materials for the Port of Nome Modification Phase 1A construction project. The materials required include PS31 and PS27.5 sheet piles, anchor piles, and X-Wye piles with specific technical specifications, including web thickness of 0.500 or 0.400 inches and conforming to ASTM A328/A328M standards. Material requirements mandate ASTM A572/A572M Grade 50 chemical properties, minimum Charpy V-Notch impact values, and interlock tensile strength of 20,000 pounds per linear inch. Interested businesses must demonstrate capability to produce, transport, and stockpile the materials in Nome, Alaska by June 2027. The deadline for submitting capability statements is December 23, 2024, with responses to be sent to tammy.davis@usace.army.mil.

The procurement is not set aside for any specific business category and falls under the NAICS category 331110 for Iron and Steel Mills and Ferroalloy Manufacturing. The sheet pile materials must meet Buy American Act requirements as specified in FAR Part 25. While no specific award value is mentioned, the project involves precise material staging with various pile lengths to be separately stockpiled at a location in Nome to be determined later. The materials must have a minimum interlock swing angle of 6 degrees and be reasonably free-sliding when interlocked. This sources sought notice is purely informational, and any submitted information is voluntary, with no monetary compensation provided for response preparation or follow-up requests.

Notice text

THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY.

The US Army Engineer District, Alaska is conducting market to identify businesses which have the capability to provide flat web sheet pile to be used in the Port on Nome Modification construction project. The material will need to be produced, transported, and stockpiled in Nome, Alaska by June 2027 for use in an upcoming Port of Nome Modification Phase 1A contract. As shown in the table below, various lengths of PS31, PS27.5, X-Wye, and Anchor Piles will need to be staged separately in Nome. The specific staging location in Nome will be determined at a later date.

The flat web sheet pile shall conform to requirements in ASTM A328/A328M.  Sheet pile shall be PS31 or PS27.5, with 0.500 or 0.400-inch-thick web respectively, as shown on the drawings.  Thicker web sheet piles may be substituted for thinner specified sheet piles. Sheet pile material shall meet ASTM A572/A572M Grade 50 chemical and physical properties. Sheet pile shall have minimum Charpy V-Notch impact values of 15/12 (average/minimum) ft. lbs at +32 degrees F in accordance with ASTM A673/A673M-17. The minimum interlock tensile strength between all flat sheet pile provided for the project shall be 20,000 pounds per linear inch ultimate strength.  All flat sheet pile shall have a minimum interlock swing angle of 6 degrees from center (neutral position). All flat sheet pile shall be as identified on the drawings. Sheet pile, anchor piles, x-wye piles, and other connectors shall be reasonably free sliding under their own weight when interlocked. Anchor piles and x-wye pile shall be fabricated as shown on the plans.

The materials shall meet the Buy American Act requirements of FAR Part 25.

Please submit your interest and capability to produce and deliver the materials to tammy.davis@usace.army.mil by 23 December 2024. 

THIS IS A SOURCES SOUGHT NOTICE AND NOT A REQUEST FOR PROPOSAL. ANY INFORMATION SUBMITTED BY INTERESTED PARTIES IS STRICTLY VOLUNTARY AND NO MONETARY COMPENSATION SHALL BE PROVIDED FOR RESPONSE PREPARATION OR FOLLOW UP REQUESTS.

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors