Separator, particle, - and other replacement parts
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N0038324RF223
- Agency
-
Naval Supply Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation from the Department of the Navy Naval Supply Systems Command seeks the repair of two mechanical actuators. Offerors must have approval to repair these parts and follow all applicable procedures and publications without deviation unless authorized. Proposals are due by March 11, 2024. Quality assurance and packaging requirements are specified.
No set-aside is designated for this requirement. As a sole source procurement, the Government does not have sufficient data to purchase from other than the current source. Potential offerors must submit source approval information with their proposals or they will not be considered. Repairs shall be performed in accordance with the latest procedures for the specified part numbers.
Notice text
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|invoice and receiving reports|tbd|TBD|TBD|TBD|TBD|SEE SCHEDULE|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|
This RFP is for a spares purchase. The Small Business Administration representative at NAVSUP WSS has reviewed this requirement and determined that a set-aside recommendation was not applicable for this procurement.
NAVSUP intends to award this within the T&Cs of BOA N0038320GX901.
This is a sole source requirement.
The Government physically does not have in its possession sufficient, accurate, or legible data to contract purchase with other than the current source.
These items require Government Source Approval prior to award. If you are not an approved source, you must submit, together with your proposal, the information detailed in the NAVSUP WSS Source Approval Brochure which can be obtained on the internet at h
https://www.navsup.navy.mil/navsup/ourteam/navsupwss/business_opps . Offers received which failprovide all data required by the source approval brochure will not be considered for award under this solicitation.
For information or questions regarding this notice, please contact valerie.m.werner2.civ@us.navy.milThis contract/delivery order/purchase order/modification is issued by the Government when deposited in the mail, transmitted by facsimile or sent by any electronic
commerce method, including email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to issue this contract/delivery order/purchase order/modification.
\
1. SCOPE
1.1 Articles to be furnished hereunder shall be repaired, tested and inspected in accordance with the terms and conditions specified in the Requirements Section of this document.
1.1.1 Any item contracted for repair SHALL have a Statement of Work to ensure compliance with all repair procedures and requirements.
Repair of:
ACTUATOR,MECHANICAL ;1680016985107; NSN , ;06302-10810-145; Part Number, Shall be performed IAW: ACTUATOR,MECHANICAL ;latest approved procedures and publications; Publication (s).
1.1.2 There will be no repair deviation from the approved written procedures without review and acceptance by the Basic Design Engineer. All requests for Waiver/Deviation shall be via Form 1694 routed throught the Local DCMA/ACO office for review and
recommendations via form 1998.
2. APPLICABLE DOCUMENTS - NOT APPLICABLE
3. REQUIREMENTS - NOT APPLICABLE
4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE.
5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE
6. NOTES - NOT APPLICABLE
1. SCOPE
1.1 Articles to be furnished hereunder shall be repaired, tested and inspected in accordance with the terms and conditions specified in the Requirements Section of this document.
1.1.1 Any item contracted for repair SHALL have a Statement of Work to ensure compliance with all repair procedures and requirements.
Repair of:
ACTUATOR,MECHANICAL ;1680016985108; NSN , ;06302-10810-146; Part Number, Shall be performed IAW: ACTUATOR,MECHANICAL ;latest approved procedures and publications; Publication (s).
1.1.2 There will be no repair deviation from the approved written procedures without review and acceptance by the Basic Design Engineer. All requests for Waiver/Deviation shall be via Form 1694 routed throught the Local DCMA/ACO office for review and
recommendations via form 1998.
2. APPLICABLE DOCUMENTS - NOT APPLICABLE
3. REQUIREMENTS - NOT APPLICABLE
4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE.
5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE
6. NOTES - NOT APPLICABLE
Notice history
| Notice | Type | Posted |
|---|---|---|
| Holder, spring - and other replacement parts | Limited / Sole Source Justification | |
| Holder, spring - and other replacement parts | Award Notice | |
| This notice | Solicitation | |
| Separator, particle, - and other replacement parts | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Actuator, mechanical, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Actuator assembly, a, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Actuator, mechanical, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Actuator, electro-me, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Actuator, electromec, in repair/modification of | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity