Seeking Sources for a Flat Washer for the MK 27 MOD 0 Tool Set
Closed Pre-Solicitation Posted
- Solicitation number
- N0017425SN0021
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- Not on record
- PSC
- 5310 Nuts And Washers
- Place of performance
- Indian Head, Maryland 20640, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) is seeking potential sources to provide a specialized flat washer for use with a small adjustable spanner wrench. This Sources Sought Notice (SSN) is a market research effort to identify manufacturers capable of producing a precise flat washer meeting specific technical specifications. The washer must be made of stainless steel (CRES, SAE AMS-QQ-S-763, Class 310, Condition A) with precise dimensions including a rectangular hole diameter of 0.196 + .010 inches, a thickness of 0.031 + .005 inches, and an overall diameter of 0.500 + .062 inches. Interested vendors are required to submit detailed capability statements by May 20, 2025, including organizational information such as business size, DUNS number, and CAGE Code. The solicitation emphasizes compliance with military standards including MIL-DTL-19595D and requires specific manufacturing practices like passivation per ASTM A967 or SAE AMS-2700.
This pre-solicitation notice does not have a specific set-aside designation and indicates a materials-only procurement with no associated services. The opportunity is not currently associated with a specific award value or quantity, serving primarily as a market research mechanism to identify potential suppliers. Vendors must provide comprehensive documentation demonstrating their capability to manufacture the washer to exact military specifications, including the ability to meet dimensional tolerances, material composition, and finish requirements. The Naval Sea Systems Command will review submissions to determine potential sources for a future formal solicitation. Technical points of contact for this opportunity are Jose Ramirez and Keith Holland, who can be reached via their Navy email addresses for any clarification or additional information about the washer requirements.
Notice text
3 versions
Update #3 · Latest ·
This Sources Sought has been extended to 20 May 2025.
This is a Sources Sought Notice (SSN). This synopsis neither constitutes a Request for Proposal, nor does it restrict the Government from an ultimate acquisition approach. This synopsis should not be construed as a commitment by the Government for any purpose. Requests for solicitation will not receive a response. All information is to be submitted at no cost or obligation to the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any input as a result of this market survey. The U.S. Government is not obligated to notify respondents of the results of this source sought. If a formal solicitation is generated at a later date, a solicitation notice will be published. No award will be made as a result of this sources sought.
The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) is seeking potential sources to provide a flat washer. The washer will work in conjunction with a lock screw on a small adjustable spanner wrench. This requirement is for materials only and no service(s) will be required.
At a minimum the flat washer will meet the following specifications and guidance.
INTERPRET DRAWING IAW:
MIL-STD-31000
ASME Y14.100 ENGINEERING DRAWING PRACTICES
ASME Y14.5 DIMENSIONS AND TOLERANCES
ASME Y14.38 ABBREVIATIONS
UNLESS OTHERWISE SPECIFIED:
FINISH ALL OVER 125
- REMOVE ALL BURRS AND BREAK SHARP EDGES .020 MAX.
- IDENTIFY AS 10001-2847260 AND THE APPLICABLE REVISION LETTER.
- DO NOT MARK ON PIECE.
- WASHER SHALL COMPLY WITH REQUIREMENTS OF MIL-DTL-19595D. (CONTACT)
- PASSIVATE AS PER EITHER ASTM A967 OR SAE AMS-2700.
- MATERIAL: CRES, SAE AMS-QQ-S-763, CLASS 310, CONDITION A
EXPLANATION
AMS-QQ-S-763: A federal specification for stainless steel bars, wire, shapes, and forgings
Grade 310: A medium carbon austenitic stainless steel
Condition A: A specification for the material of the bar
Cross Sectional Shape: Rectangular
Hole Diameter: 0.196 + .010 inches
Edge Shape: Round Center Hole
Shape: Round Thickness: 0.031 + .005 inches
Overall Diameter: 0.500 + .062 inches
Criticality Code Justification: Feat
Special Features:
Testing IAW MIL-DTL-19595D
Material: Steel comp 310
Material Specification: Qq-s-763 federal specification single material response
Submissions:
Interested entities are encouraged to respond by providing succinct responses to the items listed above. A spreadsheet can be used to organize the responses if desired.
In addition, the submission shall include the organization’s name, postal address, point of contact, phone number, fax number, e-mail address, related webpage(s) URL, business size, taxpayer identification number, DUNS number, and CAGE Code. If a formal solicitation is generated later, a solicitation notice will be published.
Additional information may be obtained from and capability statements should be sent to Jose Ramirez at jose.h.ramirez4.civ@us.navy.mil and Keith Holland at keith.l.holland.civ@us.navy.mil.
Update #2 ·
This Sources Sought has been extended to 30 April 2025.
This is a Sources Sought Notice (SSN). This synopsis neither constitutes a Request for Proposal, nor does it restrict the Government from an ultimate acquisition approach. This synopsis should not be construed as a commitment by the Government for any purpose. Requests for solicitation will not receive a response. All information is to be submitted at no cost or obligation to the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any input as a result of this market survey. The U.S. Government is not obligated to notify respondents of the results of this source sought. If a formal solicitation is generated at a later date, a solicitation notice will be published. No award will be made as a result of this sources sought.
The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) is seeking potential sources to provide a flat washer. The washer will work in conjunction with a lock screw on a small adjustable spanner wrench. This requirement is for materials only and no service(s) will be required.
At a minimum the flat washer will meet the following specifications and guidance.
INTERPRET DRAWING IAW:
MIL-STD-31000
ASME Y14.100 ENGINEERING DRAWING PRACTICES
ASME Y14.5 DIMENSIONS AND TOLERANCES
ASME Y14.38 ABBREVIATIONS
UNLESS OTHERWISE SPECIFIED:
FINISH ALL OVER 125
- REMOVE ALL BURRS AND BREAK SHARP EDGES .020 MAX.
- IDENTIFY AS 10001-2847260 AND THE APPLICABLE REVISION LETTER.
- DO NOT MARK ON PIECE.
- WASHER SHALL COMPLY WITH REQUIREMENTS OF MIL-DTL-19595D. (CONTACT)
- PASSIVATE AS PER EITHER ASTM A967 OR SAE AMS-2700.
- MATERIAL: CRES, SAE AMS-QQ-S-763, CLASS 310, CONDITION A
EXPLANATION
AMS-QQ-S-763: A federal specification for stainless steel bars, wire, shapes, and forgings
Grade 310: A medium carbon austenitic stainless steel
Condition A: A specification for the material of the bar
Cross Sectional Shape: Rectangular
Hole Diameter: 0.196 + .010 inches
Edge Shape: Round Center Hole
Shape: Round Thickness: 0.031 + .005 inches
Overall Diameter: 0.500 + .062 inches
Criticality Code Justification: Feat
Special Features:
Testing IAW MIL-DTL-19595D
Material: Steel comp 310
Material Specification: Qq-s-763 federal specification single material response
Submissions:
Interested entities are encouraged to respond by providing succinct responses to the items listed above. A spreadsheet can be used to organize the responses if desired.
In addition, the submission shall include the organization’s name, postal address, point of contact, phone number, fax number, e-mail address, related webpage(s) URL, business size, taxpayer identification number, DUNS number, and CAGE Code. If a formal solicitation is generated later, a solicitation notice will be published.
Additional information may be obtained from and capability statements should be sent to Jose Ramirez at jose.h.ramirez4.civ@us.navy.mil and Keith Holland at keith.l.holland.civ@us.navy.mil.
Update #1 ·
This is a Sources Sought Notice (SSN). This synopsis neither constitutes a Request for Proposal, nor does it restrict the Government from an ultimate acquisition approach. This synopsis should not be construed as a commitment by the Government for any purpose. Requests for solicitation will not receive a response. All information is to be submitted at no cost or obligation to the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any input as a result of this market survey. The U.S. Government is not obligated to notify respondents of the results of this source sought. If a formal solicitation is generated at a later date, a solicitation notice will be published. No award will be made as a result of this sources sought.
The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) is seeking potential sources to provide a flat washer. The washer will work in conjunction with a lock screw on a small adjustable spanner wrench. This requirement is for materials only and no service(s) will be required.
At a minimum the flat washer will meet the following specifications and guidance.
INTERPRET DRAWING IAW:
MIL-STD-31000
ASME Y14.100 ENGINEERING DRAWING PRACTICES
ASME Y14.5 DIMENSIONS AND TOLERANCES
ASME Y14.38 ABBREVIATIONS
UNLESS OTHERWISE SPECIFIED:
FINISH ALL OVER 125
- REMOVE ALL BURRS AND BREAK SHARP EDGES .020 MAX.
- IDENTIFY AS 10001-2847260 AND THE APPLICABLE REVISION LETTER.
- DO NOT MARK ON PIECE.
- WASHER SHALL COMPLY WITH REQUIREMENTS OF MIL-DTL-19595D. (CONTACT)
- PASSIVATE AS PER EITHER ASTM A967 OR SAE AMS-2700.
- MATERIAL: CRES, SAE AMS-QQ-S-763, CLASS 310, CONDITION A
EXPLANATION
AMS-QQ-S-763: A federal specification for stainless steel bars, wire, shapes, and forgings
Grade 310: A medium carbon austenitic stainless steel
Condition A: A specification for the material of the bar
Cross Sectional Shape: Rectangular
Hole Diameter: 0.196 + .010 inches
Edge Shape: Round Center Hole
Shape: Round Thickness: 0.031 + .005 inches
Overall Diameter: 0.500 + .062 inches
Criticality Code Justification: Feat
Special Features:
Testing IAW MIL-DTL-19595D
Material: Steel comp 310
Material Specification: Qq-s-763 federal specification single material response
Submissions:
Interested entities are encouraged to respond by providing succinct responses to the items listed above. A spreadsheet can be used to organize the responses if desired.
In addition, the submission shall include the organization’s name, postal address, point of contact, phone number, fax number, e-mail address, related webpage(s) URL, business size, taxpayer identification number, DUNS number, and CAGE Code. If a formal solicitation is generated later, a solicitation notice will be published.
Additional information may be obtained from and capability statements should be sent to Jose Ramirez at jose.h.ramirez4.civ@us.navy.mil and Keith Holland at keith.l.holland.civ@us.navy.mil
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Washer, flat | Naval Supply Systems Command | No set-aside | |
| Washer, flat | Land and Maritime | No set-aside | |
| Washer, flat | Aviation | Service-Disabled Veteran-Owned Small Business | |
| Washer, flat | Aviation | HUBZone | |
| NSN: 5310-01-093-2480 P/N 70361-05010-103, Washer Recessed, 135, 073 units | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity