Screwdriver, Flat Tip

5120-00-010-7913    UI: EA

          SCREWDRIVER, FLAT TIP

Current Need:   1

Estimated Yearly Average:  527

 

DESCRIPTION

In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31

Type I: Cabinet, straight sides

Tip Width: 0.144 inch

Tip Thickness 0.022 inch

Exposed blade length 5 inches, plus or minus 1/4 inch.

3/8 inch female drive insert in butt end of handle.

EXCEPTION(S) TO TECHNICAL DOCUMENT

EXCEPTION TO TECHNICAL DOCUMENT:

 Handle with 3/8 inch female drive insert.  When specified, handle shall have a metal 3/8 inch square female drive insert of a design suitable for accepting a corresponding 3/8 inch square male drive tang in accordance with ANSI B107.4, table 9.  The insert shall be flush with the butt end of the plastic screwdriver handle.  If the insert is made of ferrous material, it shall be treated to prevent corrosion.  The insert shall meet the test requirement below.  When handles with inserts are furnished, the diameter of the handle shall not be less than 1-1/32 inch.  One or more faces of the female drive opening shall be drilled or recessed so that it will engage the spring-loaded steel ball, or steel plunger on the corresponding male drive.