SCBA Breathing Air Compressor Filling Station (EU Specification) – USAG Ansbach Fire Rescue
Closed Pre-Solicitation Posted
- Solicitation number
- PAN40926P0000028932
- Agency
-
Army Contracting Command
Army Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333912 Air and Gas Compressor Manufacturing
- PSC
- 4210 Fire Fighting Equipment
- Place of performance
- Katterbach Bavaria Germany
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Army Contracting Command, through the 409th Contracting Support Brigade Regional Contracting Office Bavaria, intends to issue a Request for Quotation for procurement, delivery, installation, and TUV inspection/certification of one Self-Contained Breathing Apparatus (SCBA) Breathing Air Compressor Filling Station to EU specifications for USAG Ansbach Fire Rescue, with responses due September 1, 2026.
The equipment must comply with DIN EN 10121 and DIN EN 12021 standards, delivering 550 liters per minute at 350 bar operating pressure across four compression stages, powered by a 15 kW electric motor (50 Hz, 400 V) housed in a "Super Silent" enclosure. The station includes capacitive filter moisture monitoring with automatic shutdown on saturation, oil pressure and final-stage temperature monitoring, cycle counting, and software-based logbook functionality. The procurement includes an eight-outlet filling configuration on front and rear panels with automatic condensate drain, a six-way stainless steel wall-mounted filling console (1200 mm width) with six 300 bar filling ports, and a two-port stainless steel filling bar (750 mm width) with two 200 bar filling connections. Deliverables encompass onsite TUV acceptance, cybersecurity inspection, three precommissioning inspections of storage cylinders, and all associated travel and mileage. Place of performance is USAG Ansbach, Germany. No set-aside applies. This presolicitation notice is issued for planning and informational purposes only; detailed specifications, instructions, and evaluation criteria will be provided in the forthcoming RFQ.
Notice text
NOTICE:
This pre‑solicitation notice is issued for planning and informational purposes only and does not constitute a solicitation or commitment by the Government. All detailed specifications, instructions, and evaluation criteria will be provided in the forthcoming solicitation.
DESCRIPTION:
The 409th Contracting Support Brigade, Regional Contracting Office (RCO) Bavaria, intends to issue a Request for Quotation (RFQ) for the procurement, delivery, installation, and TÜV inspection/certification of one Self‑Contained Breathing Apparatus (SCBA) Breathing Air Compressor Filling Station (EU Specification) for USAG Ansbach Fire Rescue.
REQUIRED ITEM:
SCBA Breathing Air Compressor Filling Station (EU Spec), including:
• Breathing air compressor compliant with DIN EN 1012‑1; breathing air quality per DIN EN 12021; 550 l/min delivery rate; 350 bar operating pressure; 4 compression stages; electric motor 15 kW / 50 Hz / 400 V; “Super Silent” enclosure.
• Monitoring systems: capacitive filter moisture monitoring (normal/pre‑warning/saturated), automatic shutdown/lockout on saturation, oil pressure monitoring, final‑stage temperature monitoring, cycle counting, and software‑based logbook.
• 8‑outlet “8S” filling configuration on front and rear panels; automatic condensate drain; external control panel with ON/OFF, emergency stop, and operating hours counter.
• 6‑way stainless steel wall‑mounted filling console (1200 mm width) with 6 × 300 bar filling ports, throttles for CFRP cylinders, safety filling plugs, toggle valves with automatic venting, and 400 bar pressure gauge.
• 2‑port stainless steel filling bar (750 mm width), 2 × 200 bar filling connections, toggle‑lever valves, swivel joints, 1‑meter filling hoses with safety nipples, adjustable pressure reducer, TÜV‑certified 225 bar safety valve, dual pressure gauges.
• On‑site TÜV acceptance, cybersecurity inspection, three pre‑commissioning inspections of storage cylinders, and all associated travel/mileage.
CRITICAL REQUIREMENT – COMPATIBILITY:
All filling ports, fittings, hoses, safety filling plugs/nipples, and the compressor system must be 100% compatible and fully interoperable with the customer’s existing Draeger SCBA cylinders, including 300 bar CFRP cylinders, and the current breathing air infrastructure used by USAG Ansbach Fire Rescue. Non‑compatible equipment will be determined technically unacceptable.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Breathing Air Systems Services for Fire Emergency Services at EAFB and P42 | Air Force Test Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity