Resetting device, AI
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N0038325RP307
- Agency
-
Naval Supply Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing
- PSC
- 1710 Aircraft Landing Equipment
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Navy Naval Supply Systems Command is soliciting quotes for the procurement of 13 Resetting Devices, AI (NIIN: 017244324, Part Number: 2056AS0303-3), classified under NAICS 336413 (Other Aircraft Parts and Auxiliary Equipment Manufacturing) and PSC 1710 (Aircraft Landing Equipment). Prospective contractors must submit proposals via email to Brian.J.Emde.CIV@US.Navy.mil by the deadline of February 27, 2026. A critical requirement for this solicitation is that contractors must obtain government source approval prior to award; those lacking approved source status must submit the information detailed in the NAVSUP WSS Source Approval Brochure with their proposal. The contract includes higher-level quality requirements and inspection and acceptance procedures for the supplies. Additional contract requirements include Buy American provisions, warranty of supplies for 12 months with a 60-day discovery period for defects, annual representations and certifications, and compliance with equal opportunity requirements for workers with disabilities.
This solicitation uses no set-aside designations and does not identify any current incumbents or contractors. The solicitation does not explicitly state an award value or budget range in the provided documentation. The requirement specifies a quantity of 13 units (reduced from an original quantity of 19 through amendment), with the original solicitation posted on May 21, 2025, and subsequently extended to the current due date of February 27, 2026. Payment will be processed through Wide Area Workflow using an invoice and receiving report combination, with the contracting activity code N00383. The place of performance and delivery timeline are referenced in the contract schedule but specific details are marked as TBD in the solicitation materials provided.
Notice text
3 versions
Update #3 · Latest ·
CONTACT INFORMATION|4|TBD|TBD|TBD|TBD|
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19||||||||||||||||||||
HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X||||||||
INSPECTION AND ACCEPTANCE OF SUPPLIES|26|X||||||||||||X||||||||||||||
TIME OF DELIVERY (JUNE 1997)|20|||||||||||||||||||||
STOP-WORK ORDER (AUG 1989)|1||
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT COMBO TYPE|SOURCE/SOURCE|TBD|N00383|TBD|TBD|SEE SCHEDULE|TBD|||TBD||||||
NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1||
VALUE ENGINEERING (JUN 2020)|3||||
INTEGRITY OF UNIT PRICES (NOV 2021)|1||
WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 MONTHS|60 DAYS AFTER DISCOVERY OF DEFECT|||||
EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2|||
TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2|||
BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11||||||||||||
LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997)|1||
ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13||||||||||||||
BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5||||||
BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (FEB 2024)|1||
ROYALTY INFORMATION (APR 1984)|1||
ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND 2025-O0004))|12|336413|1250|||||||||||
FACSIMILE PROPOSALS (OCT 1997)|1||
NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X|
This solicitation is hereby amended to reduce the quantity of this requirement from 19 ea. to 13. Soliciation is hereby extended to 27 Feb 2026.
\
This solicitation is hereby extended till 15 Aug 2025. Please include allrequired documentation at time of proposal, including smaall business subcontracing plans.
THIS SOLICITATION IS FOR THE FURNISHING OF :
NIIN: 017244324
NOMEN: RESETTING DEVICE,AI
P/N: 2056AS0303-3
Qty: 19
PLEASE SUBMIT QUOTE VIA EMAIL TO BRIAN.J.EMDE.CIV@US.NAVY.MIL BY THE DUE DATE SPECIFIED ON PAGE 1, BLOCK 10.
THESE ITEMS REQUIRE GOVERNMENT SOURCE APPROVAL PRIOR TO AWARD.
IF YOU ARE NOT AN APPROVED SOURCE, YOU MUST SUBMIT, TOGETHER WITH
YOUR PROPOSAL, THE INFORMATION DETAILED IN THE NAVSUP WSS SOURCE
APPROVAL BROCHURE WHICH CAN BE OBTAINED ONLINE AT
https://www.navsup.navy.mil/public/navsup/wss/business_opps/
UNDER "COMMODITIES." OFFERS RECEIVED WHICH FAIL TO PROVIDE ALL DATA
REQUIRED BY THE SOURCE APPROVAL BROCHURE WILL NOT BE CONSIDERED FOR
AWARD UNDER THIS SOLICITATION. PLEASE NOTE, IF EVALUATION OF A SOURCE
APPROVAL REQUEST SUBMITTED HEREUNDER CANNOT BE PROCESSED IN TIME
AND / OR APPROVAL REQUIREMENTS PRECLUDE THE ABILITY TO OBTAIN SUBJECT
ITEMS IN TIME TO MEET GOVERNMENT REQUIREMENTS, AWARD OF REQUIREMENT
MAY BE CONTINUED BASED ON FLEET SUPPORT NEEDS.
1. SCOPE
1.1 The material covered in this contract/purchase order will be used in a
crucial shipboard system enabling the launch and/or recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital
shipboard systems or loss of aircraft. Therefore,the material has been
designated as Critical material and special control procedures are invoked
to ensure receipt of correct material.
1.2 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;2056AS0303; drawing number ( ;30003; ) ;MOST CURRENT REVISION.; , Revision ;NAWCAD DRAWING PACKAGE.; and all details and specifications referenced
therein.
1.3 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be
provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification.
1.4 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C.
2. APPLICABLE DOCUMENTS
DRAWING DATA=2056AS0105 |30003| M| |D| | | |
DRAWING DATA=2056AS0303-3 |30003| N| |D| | | |
DRAWING DATA=2056AS0306-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0307-1 |30003| F| |D| | | |
DRAWING DATA=2056AS0308-1 |30003| F| |D| | | |
DRAWING DATA=2056AS0310-2 |30003| E| |D| | | |
DRAWING DATA=2056AS0315-2 |30003| D| |D| | | |
DRAWING DATA=2056AS0321-16 |30003| C| |D| | | |
DRAWING DATA=2056AS0321-17 |30003| C| |D| | | |
DRAWING DATA=2056AS0321-33 |30003| C| |D| | | |
DRAWING DATA=2056AS0327-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0328-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0332-1 |30003| B| |D| | | |
DRAWING DATA=2056AS0345-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0347-1 |30003| A| |D| | | |
DRAWING DATA=2056AS0349-1 |30003| D| |D| | | |
DRAWING DATA=2056AS0351-1 |30003| A| |D| | | |
DRAWING DATA=2056AS0357-1 |30003| B| |D| | | |
DRAWING DATA=2056AS0379-1 |30003| B| |D| | | |
DRAWING DATA=2056AS0517-1 |30003| H| |D| | | |
DRAWING DATA=2056AS0518-2 |30003| A| |D| | | |
DRAWING DATA=2056AS0545-2 |30003| B| |D| | | |
DRAWING DATA=2056AS0549-2 |30003| A| |D| | | |
DRAWING DATA=2056AS0919-1 |30003| A| |C| | | |
DRAWING DATA=2056AS1501 |30003| K| |D| | | |
3. REQUIREMENTS - NOT APPLICABLE
4. QUALITY ASSURANCE
QUALITY ASSURANCE REQUIREMENTS:
1. For purposes of this TDR, the term NDT shall refer to the following methods: MT - Magnetic Particle Testing, PT-Penetrant Inspection, UT- Ultrasonic Testing, RT-Radiographic Testing, and VT-Visual Testing.
2. Companies performing NDT shall be NADCAP accredited, or a laboratory accredited by one of the organizations listed belowas satisfying ISO 17025 (General requirements for the competence of testing and calibration laboratories). NDT certificatesshall be bear
the symbols of accreditation and the accreditation body
a. American Association for Laboratory Accreditation (A2LA)
b. ANSI National Accreditation Board (ANAB)
c. International Accreditation Service, Inc (IAS)
d. National Voluntary Laboratory Accreditation Program (NVLAP)
e. Perry Johnson Laboratory Accreditation, Inc (PJLA)
f. Canadian Association for Laboratory Accreditation Inc. (CALA)
g. StandardsCouncil of Canada (SCC)
5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE
6. NOTES - NOT APPLICABLE
THIS IS AN ALRE NON-CRITICAL ITEM.
NAVSUP REFERENCE ONLY: REPAIR TDR 25-10091.
Update #2 ·
CONTACT INFORMATION|4|TBD|TBD|TBD|TBD|
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19||||||||||||||||||||
HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X||||||||
INSPECTION AND ACCEPTANCE OF SUPPLIES|26|X||||||||||||X||||||||||||||
TIME OF DELIVERY (JUNE 1997)|20|||||||||||||||||||||
STOP-WORK ORDER (AUG 1989)|1||
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT COMBO TYPE|SOURCE/SOURCE|TBD|N00383|TBD|TBD|SEE SCHEDULE|TBD|||TBD||||||
NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1||
VALUE ENGINEERING (JUN 2020)|3||||
INTEGRITY OF UNIT PRICES (NOV 2021)|1||
WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 MONTHS|60 DAYS AFTER DISCOVERY OF DEFECT|||||
EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2|||
TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2|||
BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11||||||||||||
LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997)|1||
ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13||||||||||||||
BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5||||||
BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (FEB 2024)|1||
ROYALTY INFORMATION (APR 1984)|1||
ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND 2025-O0004))|12|336413|1250|||||||||||
FACSIMILE PROPOSALS (OCT 1997)|1||
NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X|
This solicitation is hereby extended till 15 Aug 2025. Please include allrequired documentation at time of proposal, including smaall business subcontracing plans.
THIS SOLICITATION IS FOR THE FURNISHING OF :
NIIN: 017244324
NOMEN: RESETTING DEVICE,AI
P/N: 2056AS0303-3
Qty: 19
PLEASE SUBMIT QUOTE VIA EMAIL TO BRIAN.J.EMDE.CIV@US.NAVY.MIL BY THE DUE DATE SPECIFIED ON PAGE 1, BLOCK 10.
THESE ITEMS REQUIRE GOVERNMENT SOURCE APPROVAL PRIOR TO AWARD.
IF YOU ARE NOT AN APPROVED SOURCE, YOU MUST SUBMIT, TOGETHER WITH
YOUR PROPOSAL, THE INFORMATION DETAILED IN THE NAVSUP WSS SOURCE
APPROVAL BROCHURE WHICH CAN BE OBTAINED ONLINE AT
https://www.navsup.navy.mil/public/navsup/wss/business_opps/
UNDER "COMMODITIES." OFFERS RECEIVED WHICH FAIL TO PROVIDE ALL DATA
REQUIRED BY THE SOURCE APPROVAL BROCHURE WILL NOT BE CONSIDERED FOR
AWARD UNDER THIS SOLICITATION. PLEASE NOTE, IF EVALUATION OF A SOURCE
APPROVAL REQUEST SUBMITTED HEREUNDER CANNOT BE PROCESSED IN TIME
AND / OR APPROVAL REQUIREMENTS PRECLUDE THE ABILITY TO OBTAIN SUBJECT
ITEMS IN TIME TO MEET GOVERNMENT REQUIREMENTS, AWARD OF REQUIREMENT
MAY BE CONTINUED BASED ON FLEET SUPPORT NEEDS.
1. SCOPE
1.1 The material covered in this contract/purchase order will be used in a
crucial shipboard system enabling the launch and/or recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital
shipboard systems or loss of aircraft. Therefore,the material has been
designated as Critical material and special control procedures are invoked
to ensure receipt of correct material.
1.2 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;2056AS0303; drawing number ( ;30003; ) ;MOST CURRENT REVISION.; , Revision ;NAWCAD DRAWING PACKAGE.; and all details and specifications referenced
therein.
1.3 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be
provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification.
1.4 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C.
2. APPLICABLE DOCUMENTS
DRAWING DATA=2056AS0105 |30003| M| |D| | | |
DRAWING DATA=2056AS0303-3 |30003| N| |D| | | |
DRAWING DATA=2056AS0306-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0307-1 |30003| F| |D| | | |
DRAWING DATA=2056AS0308-1 |30003| F| |D| | | |
DRAWING DATA=2056AS0310-2 |30003| E| |D| | | |
DRAWING DATA=2056AS0315-2 |30003| D| |D| | | |
DRAWING DATA=2056AS0321-16 |30003| C| |D| | | |
DRAWING DATA=2056AS0321-17 |30003| C| |D| | | |
DRAWING DATA=2056AS0321-33 |30003| C| |D| | | |
DRAWING DATA=2056AS0327-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0328-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0332-1 |30003| B| |D| | | |
DRAWING DATA=2056AS0345-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0347-1 |30003| A| |D| | | |
DRAWING DATA=2056AS0349-1 |30003| D| |D| | | |
DRAWING DATA=2056AS0351-1 |30003| A| |D| | | |
DRAWING DATA=2056AS0357-1 |30003| B| |D| | | |
DRAWING DATA=2056AS0379-1 |30003| B| |D| | | |
DRAWING DATA=2056AS0517-1 |30003| H| |D| | | |
DRAWING DATA=2056AS0518-2 |30003| A| |D| | | |
DRAWING DATA=2056AS0545-2 |30003| B| |D| | | |
DRAWING DATA=2056AS0549-2 |30003| A| |D| | | |
DRAWING DATA=2056AS0919-1 |30003| A| |C| | | |
DRAWING DATA=2056AS1501 |30003| K| |D| | | |
3. REQUIREMENTS - NOT APPLICABLE
4. QUALITY ASSURANCE
QUALITY ASSURANCE REQUIREMENTS:
1. For purposes of this TDR, the term NDT shall refer to the following methods: MT - Magnetic Particle Testing, PT-Penetrant Inspection, UT- Ultrasonic Testing, RT-Radiographic Testing, and VT-Visual Testing.
2. Companies performing NDT shall be NADCAP accredited, or a laboratory accredited by one of the organizations listed belowas satisfying ISO 17025 (General requirements for the competence of testing and calibration laboratories). NDT certificatesshall be bear
the symbols of accreditation and the accreditation body
a. American Association for Laboratory Accreditation (A2LA)
b. ANSI National Accreditation Board (ANAB)
c. International Accreditation Service, Inc (IAS)
d. National Voluntary Laboratory Accreditation Program (NVLAP)
e. Perry Johnson Laboratory Accreditation, Inc (PJLA)
f. Canadian Association for Laboratory Accreditation Inc. (CALA)
g. StandardsCouncil of Canada (SCC)
5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE
6. NOTES - NOT APPLICABLE
THIS IS AN ALRE NON-CRITICAL ITEM. JUAN PANTOJA.
Update #1 ·
CONTACT INFORMATION|4|TBD|TBD|TBD|TBD|
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19||||||||||||||||||||
HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X||||||||
INSPECTION AND ACCEPTANCE OF SUPPLIES|26|X||||||||||||X||||||||||||||
TIME OF DELIVERY (JUNE 1997)|20|||||||||||||||||||||
STOP-WORK ORDER (AUG 1989)|1||
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT COMBO TYPE|SOURCE/SOURCE|TBD|N00383|TBD|TBD|SEE SCHEDULE|TBD|||TBD||||||
NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1||
VALUE ENGINEERING (JUN 2020)|3||||
INTEGRITY OF UNIT PRICES (NOV 2021)|1||
WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 MONTHS|60 DAYS AFTER DISCOVERY OF DEFECT|||||
EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2|||
TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2|||
BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11||||||||||||
LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997)|1||
ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13||||||||||||||
BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5||||||
BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (FEB 2024)|1||
ROYALTY INFORMATION (APR 1984)|1||
ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND 2025-O0004))|12|336413|1250|||||||||||
FACSIMILE PROPOSALS (OCT 1997)|1||
NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X|
THIS SOLICITATION IS FOR THE FURNISHING OF :
NIIN: 017244324
NOMEN: RESETTING DEVICE,AI
P/N: 2056AS0303-3
Qty: 19
PLEASE SUBMIT QUOTE VIA EMAIL TO BRIAN.J.EMDE.CIV@US.NAVY.MIL BY THE DUE DATE SPECIFIED ON PAGE 1, BLOCK 10.
THESE ITEMS REQUIRE GOVERNMENT SOURCE APPROVAL PRIOR TO AWARD.
IF YOU ARE NOT AN APPROVED SOURCE, YOU MUST SUBMIT, TOGETHER WITH
YOUR PROPOSAL, THE INFORMATION DETAILED IN THE NAVSUP WSS SOURCE
APPROVAL BROCHURE WHICH CAN BE OBTAINED ONLINE AT
https://www.navsup.navy.mil/public/navsup/wss/business_opps/
UNDER "COMMODITIES." OFFERS RECEIVED WHICH FAIL TO PROVIDE ALL DATA
REQUIRED BY THE SOURCE APPROVAL BROCHURE WILL NOT BE CONSIDERED FOR
AWARD UNDER THIS SOLICITATION. PLEASE NOTE, IF EVALUATION OF A SOURCE
APPROVAL REQUEST SUBMITTED HEREUNDER CANNOT BE PROCESSED IN TIME
AND / OR APPROVAL REQUIREMENTS PRECLUDE THE ABILITY TO OBTAIN SUBJECT
ITEMS IN TIME TO MEET GOVERNMENT REQUIREMENTS, AWARD OF REQUIREMENT
MAY BE CONTINUED BASED ON FLEET SUPPORT NEEDS.
1. SCOPE
1.1 The material covered in this contract/purchase order will be used in a
crucial shipboard system enabling the launch and/or recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital
shipboard systems or loss of aircraft. Therefore,the material has been
designated as Critical material and special control procedures are invoked
to ensure receipt of correct material.
1.2 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;2056AS0303; drawing number ( ;30003; ) ;MOST CURRENT REVISION.; , Revision ;NAWCAD DRAWING PACKAGE.; and all details and specifications referenced
therein.
1.3 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be
provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification.
1.4 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C.
2. APPLICABLE DOCUMENTS
DRAWING DATA=2056AS0105 |30003| M| |D| | | |
DRAWING DATA=2056AS0303-3 |30003| N| |D| | | |
DRAWING DATA=2056AS0306-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0307-1 |30003| F| |D| | | |
DRAWING DATA=2056AS0308-1 |30003| F| |D| | | |
DRAWING DATA=2056AS0310-2 |30003| E| |D| | | |
DRAWING DATA=2056AS0315-2 |30003| D| |D| | | |
DRAWING DATA=2056AS0321-16 |30003| C| |D| | | |
DRAWING DATA=2056AS0321-17 |30003| C| |D| | | |
DRAWING DATA=2056AS0321-33 |30003| C| |D| | | |
DRAWING DATA=2056AS0327-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0328-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0332-1 |30003| B| |D| | | |
DRAWING DATA=2056AS0345-1 |30003| C| |D| | | |
DRAWING DATA=2056AS0347-1 |30003| A| |D| | | |
DRAWING DATA=2056AS0349-1 |30003| D| |D| | | |
DRAWING DATA=2056AS0351-1 |30003| A| |D| | | |
DRAWING DATA=2056AS0357-1 |30003| B| |D| | | |
DRAWING DATA=2056AS0379-1 |30003| B| |D| | | |
DRAWING DATA=2056AS0517-1 |30003| H| |D| | | |
DRAWING DATA=2056AS0518-2 |30003| A| |D| | | |
DRAWING DATA=2056AS0545-2 |30003| B| |D| | | |
DRAWING DATA=2056AS0549-2 |30003| A| |D| | | |
DRAWING DATA=2056AS0919-1 |30003| A| |C| | | |
DRAWING DATA=2056AS1501 |30003| K| |D| | | |
3. REQUIREMENTS - NOT APPLICABLE
4. QUALITY ASSURANCE
QUALITY ASSURANCE REQUIREMENTS:
1. For purposes of this TDR, the term NDT shall refer to the following methods: MT - Magnetic Particle Testing, PT-Penetrant Inspection, UT- Ultrasonic Testing, RT-Radiographic Testing, and VT-Visual Testing.
2. Companies performing NDT shall be NADCAP accredited, or a laboratory accredited by one of the organizations listed belowas satisfying ISO 17025 (General requirements for the competence of testing and calibration laboratories). NDT certificatesshall be bear
the symbols of accreditation and the accreditation body
a. American Association for Laboratory Accreditation (A2LA)
b. ANSI National Accreditation Board (ANAB)
c. International Accreditation Service, Inc (IAS)
d. National Voluntary Laboratory Accreditation Program (NVLAP)
e. Perry Johnson Laboratory Accreditation, Inc (PJLA)
f. Canadian Association for Laboratory Accreditation Inc. (CALA)
g. StandardsCouncil of Canada (SCC)
5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE
6. NOTES - NOT APPLICABLE
THIS IS AN ALRE NON-CRITICAL ITEM. JUAN PANTOJA.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Resetting device, AI | Award Notice | |
| This notice | Solicitation | |
| Resetting device, AI | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| SSE, aircraft, materi, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Input device assy (, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Central electronics, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Indicator, attitude, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Fixture, aircraft MA | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity