Request for Interested Manufacturers: F-16 Aircraft Ejection Seat, NSN: 1680-01-473-8222MH, P/N: J114936-547
Closed Pre-Solicitation Posted
Not the latest version. See the latest solicitation from .
- Solicitation number
- SPRWA1-26-8222
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- Not on record
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Aviation is conducting market research to identify potential manufacturers capable of producing F-16 Aircraft Ejection Seats, specifically NSN 1680-01-473-8222MH, Part Number J114936-547. The ejection seat is part of the Advanced Concept Ejection Seat (ACES) II suite used in F-16 Fighting Falcon aircraft, featuring third-generation technology capable of zero-zero ejection conditions up to maximum altitude and air speeds of 600 KEAS. The seat operates with peak catapult acceleration of approximately 12gz, utilizes a center-pull handle design, and reclines at a 30-degree angle for improved pilot comfort during combat operations. The government does not own technical data, drawings, or schematics for this equipment, creating a significant impediment to competition. Interested manufacturers must respond by October 29, 2025, by contacting Tonett Pendleton at tonett.pendleton@us.af.mil and Victor Henderson at victor.henderson.2@us.af.mil.
This procurement opportunity has no set-aside designation and the government intends to award a sole source contract to Collins Aerospace (CAGE 13499), the current original equipment manufacturer that maintains configuration control and possesses the necessary technical data. Collins Aerospace is identified as the only known source with adequate knowledge to manufacture the seat to required performance specifications and ensure equipment compatibility. The contracting office plans to use Other Than Full and Open Competition procedures under FAR 6.302-1, citing "Only One Responsible Source" as justification. The notice does not specify award values, quantities to be procured, or service timelines. The opportunity was posted on October 14, 2025, with the response deadline set for October 29, 2025, providing interested parties a 15-day window to demonstrate their capabilities and challenge the sole source determination.
Notice text
SUBJECT
Market research is being conducted to identify potential sources that may possess the expertise, capabilities, and experience to meet the requirements for qualification and production of the F-16 Aircraft Ejection Seat, NSN: 1680-01-473-8222MH, P/N: J114936-547.
ITEM DESCRIPTION
The F-16 Ejection Seat is part of the Advanced Concept Ejection Seat (ACES) II suite used in the Fighting Falcon. It is a third-generation seat, capable of ejecting a pilot from zero-zero conditions up to maximum altitude and air speeds in the 600 KEAS range. The peak catapult acceleration is about 12gz and use a center-pull handle to allow for the pilot's physiological response to the G-forces of combat maneuvering. The seat reclines at a 30-degree angle which is more obtuse to allow for better comfort in the cockpit.
IMPEDIMENT TO COMPETITION
The current original equipment manufacturer for the ejection seat is Collins Aerospace (CAGE 13499), which maintains its configuration by part number and configuration control. The Government does not own any data/drawings/schematics or has limited rights which indicate an inability to release data for competitive solicitation. As a result, Collins Aerospace is the only known source with adequate knowledge to manufacture the seat to its performance requirements and specifications. Collins has the required technical data and capabilities needed to produce the seats and ensure compatibility of the equipment.
INTEREST
The DLA/AWB Contracting Office intends to award a sole source contract to Collins Aerospace for the manufacture of the F-16 Ejection Seat. Other interested parties may identify their interest and capability to respond to the requirement no later than 29 Oct 2025 by emailing Tonett Pendleton, tonett.pendleton@us.af.mil, and Victor Henderson, victor.henderson.2@us.af.mil. The Government intends to procure these items using Other Than Full and Open Competition as prescribed by FAR 6.302-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements.
DISCLAIMER
This sources sought synopsis is for informational purposes only. This is not a request for proposal. It does not constitute a solicitation, and shall not be construed as a commitment by the government. Responses in any form are not offers, and the government is under no obligation to award a contract as a result of this announcement. No funds are available to pay for preparation of responses to this announcement. Any information submitted by respondents to this technical description is strictly voluntary.
Notice history
| Notice | Type | Posted |
|---|---|---|
| F-16 Aircraft Ejection Seat | Solicitation | |
| F-16 Aircraft Ejection Seat | Pre-Solicitation | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Cylinder Assembly (Load Arrestor) PN 1171-3 | Air Force Sustainment Center | No set-aside | |
| Seat, aircraft | Aviation | Total Small Business | |
| Seat, aircraft | Land and Maritime | No set-aside | |
| Sources Sought for F15E Grip Assembly Left Hand Controller and F15E Grip Assembly Right Hand Controller | Aviation | No set-aside | |
| F16_matrix_assy_wingstation_4_6_NAN6110014651078_PN16E3634859 | Air Force Sustainment Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity