Replacement parts for HABCO Industries HTSS000C Hydraulic Test Stand

The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 332919 Other Metal Valve and Pipe Fitting Manufacturing. This is a brand name or equal solicitation with the only acceptable items manufactured by HABCO INDUSTRIES LLC as listed in the individual descriptions.  This requirement will be set aside as a 100% Small Business concern.

The Contract Line Items (CLINs) are as follows.

0001 1 Each

N4215813360151

FFP

HABCO SERVO TEST MANIFOLD

SERVO TEST MANIFOLD DUCTILE IRON (19"X12"X11") W/ CLEAR ZINC

TRIVALENT COATING

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N4215813360151

PURCHASE REQUEST NUMBER: N4215813360151

PROJECT: YY9

PSC CD: 4730

0002 1 Each

N4215813360153

FFP

HABCO TRANSMITTER

TRANSMITTER, FLOWMETER, TEMPERATURE COPENSATIN, LINEAR

LINK, 15-32 VDC POWER RF CARRIER

FOB: Destination

MILSTRIP: N4215813360153

PURCHASE REQUEST NUMBER: N4215813360151

PROJECT: YY9

PSC CD: 6695

0003 1 Each

N4215813360154

FFP

HABCO POTENTIOMETER

POTENTIOMETER, IP65, 10K OHM, BLACK

FOB: Destination

MILSTRIP: N4215813360154

PURCHASE REQUEST NUMBER: N4215813360151

PROJECT: YY9

PSC CD: 9999

0004 1 Each

N4215813360157

FFP

HABCO PRESSURE GAUGE

PRESSUE GAUGE, FRONT FLANGE MOUNT, 4 1/2" DIAL, 1/4% FULL

SCALE ACCURACY

FOB: Destination

MILSTRIP: N4215813360157

PURCHASE REQUEST NUMBER: N4215813360151

PROJECT: YY9

PSC CD: 6685

Technical Ordering Data For Parts to Repair HABCO Industries

HTSS000C Hydraulic Test Stand

1. Specification:

1.1. Scope: Provide the following replacement parts to repair test stand.

1.1.1. (lea.) 128-1423-05 Servo Test Manifold Ductile Iron (19"x12"x11") W/ Clear Zinc

Trivalent Coating,

1.1.2. (lea.) FT-24C2U2-LEAT5 METER, FLOW

1.1.3. (lea.) LAT-3-C0-MAB6 METER TRANSDUCER, FLOW

1.1.4. (lea.) EXX2300-10K POTENTIOMETER

1.1.5. (lea.) EXX2640 PLATE, LABEL

1.1.6. (lea.) 50205K31 SWITCH, FLOAT

1.1.7. (lea.) 101FTM16A01 PRESSURE GAUGE

2. Equipment Specifications: HABCO Industries HTS5000C Hydraulic Test Stand serial number

7866

2.1. Salient Characteristics of Replacement Parts: Replacement parts shall meet the

following salient characteristics:

2.1.1. Servo Test Manifold (lea.): HABCO Proprietary item number 128-1423-05

2.1.1.1. Material: Ductile Iron with Clear Zinc Trivalent Coating

2.1.1.2. Dimensions: (19"x12"x11")

2.1.1.3. Operating Pressure: 6,000 PSI

2.1.1.4. LOGIC ELEMENT {9ea.): P/N DKJS-XHN W/BUNA-N SEALS, 2 WAY/2 POS

2.1.1.5. LOGIC ELEMENT {2ea.): P/N DKDSXHN W/BUNA-N SEALS

2.1.1.6. PILOT OPERATED 3 WAY CARTRIDGE VALVES {12ea.): P/N DBAP-FCN

2.1.1.7. DIRECT ACTING RELIEF VALVES {3ea.): P/N RDJA-LCN WITH AN

ADJUSTABLE RANGE OF 1000-6000 PSIG (SET@ 5200 PSI)

2.1.1.8. DIRECT ACTING RELIEF VALVE {lea.): P/N RDJA-LBN WITH AN

ADJUSTABLE RANGE OF 300-1500 PSI (SET AT 900 PSIG)

2.1.1.9. DIRECT ACTING RELIEF VALVE {lea.): P/N RDDALBN WITH AN

ADJUSTABLE RANGE OF 300-1500 PSIG (SET AT 900 PSIG)

2.1.1.10. 3-WAY AIR PILOTED DIRECTIONAL CONTROL VALVE {3ea.): P/N DVBD

8FN W/INTEGRAL AIR PILOT CARTRIDGE P/N DAAP-FCN

2.1.1.11. MANIFOLD TO HAVE SAE FLANGE PORTS

2.1.1.12. MANIFOLD TO HAVE SAE STRAIGHT THREADED PORTS

2.1.1.13. MANIFOLD WILL INCLUDE LIFTING EYES ON EACH SIDE

2.1.2. FT-24C2U2-LEAT5 METER, FLOW {lea.): FLOW METER, TURBUNE TYPE, 1" 300#

ANSI RF FLANGE ENDS, TWO VISCOSITY UNIVERSAL CALIBRATION, FOR USE WITH

CHEVRON 2190TEP/MIL-PRF-17331 AT 90°F & 130°F, 10 POINTS CALIBRATION AT

EACH VISCOSITY, FLOW RANGE OF 1.0 TO 60 GPM, 316 SST HOUSING, 440C BALL

BEARINGS, RF PICKOFF, INTEGRAL RTD, FLYING LEADS.

2.1.3. LAT-3-C0-MAB6 METER TRANSDUCER, FLOW (lea.): TRANSMITTER,

FLOWMETER, TEMPERATURE COMPENSATING, 'LINEAR LINK', 15-32 VDC POWER,

RF CARRIER PICKOFF INPUT, INTEGRAL 100 OHM RTD INPUT, ANALOG CURRENT

OUTPUT (4-20 Ma), ANALOG TEMPERATURE OUTPUT (4-20mA), PULSE FLOW

OUTPUT (0-5 V), NEMA 4X ENCLOSURE WITH 1/2" NPT CONDUIT CONNECTIONS.

2.1.4. EXX2300-10K POTENTIOMETER (lea.): 22MM POTENTIOMETER WITH 10 KOHM

RESISTANCE, BLACK HANDLE. LEGEND PLATE EXX2640 SOLD SEPARATELY.

2.1.5. EXX2640 PLATE, LABEL (lea.): 22MM LEGEND PLATE FOR POTENTIOMETER

WITH 0% TO 100% MARKING, 1 PER PACK

2.1.6. 50205K31 SWITCH, FLOAT (lea.): LIQUID LEVEL SWITCH, POLYBUTYLENE FLOAT

& STEM, 300 DEG F MAX. TEMP, 100 PSI MAX. PRESSURE, 0.85 MIN. S.G., 0.28

AMPS@ 120 VAC, 1/2" NPTM MOUNTING, 2-3/4" MTG. LENGTH, 24" WIRE LEADS

2.1.7. 101FTM16A01 PRESSURE GAUGE (lea.): PRESSURE GAUGE, FRONT FLANGE

MOUNT, 4 1/2" DIAL, 1/4% FULL SCALE ACCURACY

1. Warranty: Supplies furnished shall be covered by warranty from defects in design, materials

and workmanship for a period of one (1) year and shall conform to all requirements of the

contract.

2. Location: Norfolk Naval Shipyard/Building 171/lst floor/Code 931/Section 204 Hydraulics

3. Technical POC: Russell Harris, Russell.r.harris@navy.mil 757-636-4908

Patrick A. Craig, Patrick.craig@navy.mil 757-532-3295

This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM122Q0031 and it is expected to be posted on or about 10 December 2021 and posted in SAM, https://.sam.gov/. Quotes will be due by 6:00 am EST on 21 December 2021 and may be emailed to the attention of Craig Harmon at craig.harmon@dla.mil. Please make sure that the solicitation number (SPMYM122Q0031) is included in the subject line of any email correspondence.  Emails without subject lines will not be read because of security issues.

Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://.sam.gov/

By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.