Replace HVAC chase B wardroom and all hands dining USCG academy, new london, CT project no. 10224937

70Z0G118BPFA01000
ISSUE DATE: 20 DECEMBER 2017

Contractor shall provide all personnel, equipment, materials, tools, vehicles, supervision, and other items and services required for a complete replacement of several air handling units as noted on drawings for complete and operating systems including, but not limited to the following items of work:

Remove existing heating and ventilation (H&V) unit for Cadet Wardroom and replace with new HVAC air handling unit for heating, ventilation, and cooling. New unit will include chilled water coil connected to existing chilled water supply in building and controls connected to the existing building HVAC controls system. Reconfigure stream and condensate piping and ductwork for new unit installation; remove and replace electrical conduit and wire back to panel in sub-basement.

Remove existing outdoor ventilation unit for the Academy bookstore and replace with a new heating and ventilation (H&V) unit in the mechanical closet for ventilation. Remove existing steam and condensate piping back to main loop; provide new steam and condensate piping to new unit location; remove and replace electrical conduit and wire back to panel in basement.

Remove existing small DX split air conditioning units from Elevator and Transformer rooms located in the sub-basement mechanical room and replace with new chilled water fan coil unit connected to the building's existing chilled water supply system. Remove and replace electrical conduit and wire back to panel in sub-basement.

Remove existing roof top split air handling unit for heating, cooling, and ventilation; remove and replace existing electrical conduit and wire for condenser unit back to panel in basement.

Contractor shall provide temporary cooling throughout the time that the All Hands Dining existing air handling unit is out of service; provide temporary power generator for temporary cooling equipment; remove and replace unit controls and sensors; and re-use existing control wire and conduit where feasible.

The overall period of performance for the project is 230 days from issuance of Notice to Proceed. The Period of Performance for work on-site is from 7 May 2018 through 28 September 2018.

The estimated value of the procurement is between $600,000 and $850,000. Performance and Payment bonds will be required. Solicitation packages will be available on or about 20 December 2017. The tentative date set for receipt of bids is 23 January 2018 at 2:00 p.m.

The applicable North American Industry Classification System (NAICS) code is 238220 -- Plumbing, Heating, and Air-Conditioning Contractors with a small business size standard of $15.0 million.

This acquisition is issued pursuant to FAR Part 14 Sealed Bidding and is 100% Set-Aside for Small Business concerns. All relevant solicitation documents, including specifications and drawings may be accessed for download beginning on the date of issue at the following site: http://www.fbo.gov.

To receive immediate notification of all changes posted electronically, vendors should click on "Register to Receive Notification". All vendors interested in teaming or subcontracting for this solicitation, should click on "Register as Interested Vendor". In order to view a list of interested vendors, interested parties should click on "View List of Interested Vendors". A list of interested vendors is only available by registering electronically for this solicitation. Vendors MUST be registered in the System for Award Management database through www.SAM.gov in order to receive a federal government contract.