Repair of JSECST (Joint Service Electronic Combat System Tester) AN/USM 670/670A Subassemblies

Closed Pre-Solicitation Posted

Solicitation number
FA8517-27-R-0019
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

PSC
Not on record
Place of performance
Warner Robins, Georgia, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The Department of the Air Force Materiel Command Air Force Sustainment Center is conducting market research to identify repair service providers for JSECST AN/USM 670/670A subassemblies, with responses due by October 14, 2026. The requirement is structured as a five-year contract (basic plus four one-year ordering periods) extending through FY33, with best estimated quantities of 128 units annually across 25 National Stock Numbers including circuit card assemblies, digital computers, power supplies, RF controllers, and disk bay assemblies. Work encompasses repair and remanufacture services to ensure full compatibility with the equipment system. The government seeks sources demonstrating expertise, capabilities, and experience meeting unspecified qualification requirements tied to the specific component subassemblies listed. No set-aside applies to this procurement. NAICS code 811210 (Electronic and Precision Equipment Repair and Maintenance) governs the competition.

Notice text

The Government is conducting market research to identify potential sources that may possess the expertise, capabilities, and experience to successfully meet the qualification requirements to repair/remanufacture multiple National Stock Numbers (NSNs) to ensure full compatibility with the JSECST AN/USM 670/670A Subassemblies. This requirement is for repair services. Our repair services strategy is a five (5) year contract (basic plus four (4) ordering periods) and will continue through FY33. The projected quantities will be Best Estimated Quantities (BEQ) of 128 per year. The Nation Stock Numbers (NSNs) and BEQs are as follows:

ITEM                 NSN                      DESCRIPTION                 PART NUMBER
1           5998-01-508-8194EW        CCA, Multiplier                37534-47360-10
2           7021-01-508-8195EW        Computer, Digital             37534-90004-1
3           4920-01-653-5316KV         Computer, Digital             40469-40008-10
4           5998-01-508-8196EW        CCA, Receiver                 40294-47070-10
5            5998-01-508-8197EW         Adapter, RMU                37534-40035-20
6            5998-01-508-8206EW         RF Control                     37534-47201-10 / 37534-47001-10
7            5998-01-640-7206EW         RF Control                      37534-47201-20
8            5998-01-656-2881KV          RF Controller                  37534-47301-10
9            5998-01-660-5960KV          RF Controller                  38360-47002-10
10          5998-01-661-7164KV          RF Controller                  37534-47201-30
11          6130-01-509-0968EW         Power Supply                  37534-90006-1
12          6130-01-695-1497KV          Power supply                  38360-40110-10 / 37534-90006-1
13          4920-01-509-5154EW         Adapter, HHCU               37534-90007-4
14          5998-01-508-6827EW         CCA, Digital Osc.            37534-47015-10
15          5998-01-640-7204KV          DTO, CCA                       40469-47015-10
16          5998-01-673-1493KV          DTO, CCA                       37534-47115-20
17          5998-01-508-6828EW         Digital Osc., Gen             37534-47019-10
18          5998-01-508-6830EW         CCA, Power Monitor        37534-47030-10
19          5998-01-633-9650KV          CCA, Power Monitor        39818-47030-20
20          5998-01-661-7166KV          CCA, Power Monitor        37534-47030-20
21          5998-01-508-6831EW          CCA, Digitizer                 40294-47002-10
22          5998-01-579-5023KV           CCA, Digitizer                 38360-40004-10
23          5998-01-508-6832EW          CCA, Modulator              37534-40230-10
24          5998-01-508-6833EW           Disk Bay Assy.               37534-40060-10
25          5998-01-640-7207KV            Disk Bay Assy.               40469-40060-10 / 40469-40060-10
26          5998-01-569-2585EW           CCA, SUT Interface       38783-40011-10
27          5998-01-509-2254EW           CCA                                37534-90008-1
28          5995-01-502-4609EW           Heater Assy.                   37534-40340-10
29          5998-01-735-6612EW           Computer, Digital            78209-40009-10
30          5998-01-722-3966EW           CCA, Receiver                78209-47070-10
31          5998-01-723-4732EW            DTO, CCA                      78209-47015-10
32          5998-01-724-9142EW            CCA, Digitizer                 78209-40004-10
33          5998-01-728-2214EW             RF Controller                  78209-47001-10
34          5998-01-722-3689EW             CCA, Modulator             78209-40230-10
35             DATA                                     IUID (Item Unique Identification)         N/A
36             DATA                                    Teardown Deficiency Report                 N/A
37             DATA                                    CAV AF (Cost & Analysis Validation)     N/A
38    RESERVED                                  BER/NFF (Beyond Economical Repair/No Fault Found)    N/A
 

All Contractor personnel handling items will need to possess a valid security clearance. JSECST AN/USM 670/670A Subassemblies are RMC (R3): Repair, for the second or subsequent time, directly from the actual manufacturer.

Contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor is responsible for providing, maintaining, and calibrating all support equipment required at their facility or a subcontractor’s facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts.

The government will not reimburse participants for any expenses associated with their participation in this survey.

**Delivery schedule- 120 business days After Receipt of Carcass (AROC).**

**PLEASE READ THE ATTACHMENT AND ITS ENTIRETY. INTERESTED PERSON PROVIDE ANSWERS TO THE QUESTIONNAIRE AND SUBMIT THEM TO THE FOLLOWING POCs. ANY QUESTIONS SHOULD BE SUBMITTED VIA EMAIL.**

PRIMARY POC: Latonya Jackson; latonya.jackson.1@us.af.mil

SECONDARY POC: Lindsey Waybright; lindsey.waybright@us.af.mil

Similar open opportunities

Opportunity Agency Set-aside Responses due
Repair of the F16 UCADC NAICS 811210 Air Force Sustainment Center No set-aside
F16_APG68_DualModeTransmitter_Monitor_5998012744648_PN772R023G01 Tinker AFB, Oklahoma 73145, United States Air Force Sustainment Center No set-aside
SSE, aircraft, materi, in repair/modification of Naval Supply Systems Command No set-aside
F-16_an_APG68_PN762R128G01_NSN5998012428034 Tinker AFB, Oklahoma 73145, United States · NAICS 81121 Air Force Sustainment Center No set-aside
F16_AN_APG_68_Radar_Transmitter_NSN5998012478169_PN_762R923G01 Tinker AFB, Oklahoma 73145, United States Air Force Sustainment Center No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors