Repair Interior Finishes B#2201, Suwon AB (MATOC ONLY)

PRINCIPAL FEATURES: This project includes, but shall not be limited to the following principal features:

0001. PHASE PLAN

1. The construction contractor shall be required to conduct the work according to the phase plan as shown on the drawings.

0002. ARCHITECTURAL WORK

A. REMOVAL WORK
1. Remove existing deteriorated floor finishes as shown on the drawings.
2. Remove existing acoustical ceiling tiles including ceiling hangers & supports as shown on the drawings.
3. Remove existing ceiling and GWB (Gypsum Wall Board) including molding as shown on the drawings.
4. Remove existing deteriorated wood panel as shown on the drawings.
5. Dispose and haul waste material off the base.
6. Existing furniture and equipment shall be removed, stored, and reinstalled by the construction contractor at government designated place.

B. REPAIR INTERIOR FLOOR FINISH
1. Install new vinyl composition tile (VCT) with vinyl cove base (VCB) and wax on new VCT as shown on the drawings.
2. Install new carpet with vinyl straight base as shown on the drawings.
3. Install new quarry tile with quarry tile base as shown on the drawings.
4. Install new ceramic mosaic tile as shown on the drawings.

C. REPAIR INTERIOR CEILING
1. Install new GWB ceiling with steel furring including ceiling access doors as shown on the drawings.
2. Replace existing acoustic ceiling tiles including suspension system as shown on the drawings.

D. REPLACE EXISTING WOOD PANEL
1. Install new wood panel as shown on the drawings.