Repair Finishes Basewide

THIS IS A SOURCES SOUGHT NOTIFICATION ONLY

1. Work shall not include painting any prefinished items. Several doors and louvers are anodized aluminum bronze colored finish. DO NOT PAINT THESE "storefront" type entrances or non-painted surfaces.

2. Doors and frames, louvers, steel columns, handrails, protective pipe bollards, and wall mounted roof access ladders to receive new paint are summarized on attached sheet. Doors are called out in 3070 personnel door "equivalents"; that is, double 3070 doors will be included as two (2) personnel doors. Overhead coiling doors have an average size of 12 ft wide X 12 ft high. Note that aircraft hangar bay doors at Bldgs 135 and 138 are not included in this painting effort.

3. Work generally includes all items necessary to prepare and paint personnel doors and frames and overhead coiling doors and frames, and miscellaneous steel items at buildings identified in this Statement of Work. A base plan is provided for reference.

a. Work includes the exterior face of personnel doors and frames.

b. Work includes both sides of overhead doors and frames.

c. Work includes painting previously painted exterior mechanical system louvers.

d. Work includes painting handrails.

e. Work includes painting protective bollards safety yellow and black strips.

f. Prepare surfaces to be painted by using paint removers, abrasive paint, cleaning materials as necessary to provide a surface that will accept new paint and adhere to the surface for the long term. Provide coatings with urethane to protect painted surfaces against chaulking, peeling, fading, etc.

g. Provide paint that matches the base color standard of dark bronze. Color shall match doors on Civil Engineer Bldg 700.

h. Provide worker lift, ladders, scaffolding, etc as necessary to access work. Some doors and louvers are on second floor level or higher. Some columns are 12 ft or more high.

i. Paint louvers in doors where present.

j. Remove signage as necessary, paint doors, and provide new signage such as fire department symbols, authorized personnel only, secure area, etc.

4. Estimated quantities of items to be completed are summarized below.

Qty

CSI Number

Description

Unit

751

059105006170

Steel surface treatment, wire brush, hand (SSPC-SP2)

S.F.

751

059506506610

Structural st projs, pnts & prot coatings, sprayed, epoxy, primer

S.F.

751

059506506630

Strl st projs, pnts & prot ctg, sprayed, epoxy, intmd or topcoat

S.F.

205

099103000135

Door frames & trim, only, brushwork, exterior latex, 2 coats

Ea.

205

099103000160

Doors, flush, both sides, incl. frame & trim, roll & brush, primer

Ea.

205

099103000200

Doors, flsh, bth sides, incl. frme & trm, brshwrk, stn, sealr & 2 cts poly

Ea.

855

099106305720

Misc.pipe to 8"dia. ptd 3 coat, brushwk

L.F.

8,352

099107000800

Siding, steel siding, oil base, paint 2 coats, brushwork

S.F.

205

099909000080

Surface prep., ext., doors, comm., wire brush, metal, flush

S.F.

75

104302005500

Signs, signs, exit signs, sticky back, stock decals, 14" x 10"

Ea.

171

150754000128

Pipe marker, plastic snap-on, 8" pipe

Ea.

.