Remanufacture of E-3 Flap Drive Ball Screw Assembly

1. ACTUAL issue date: 30 MAY 2019; ACTUAL closing/response date: 1 JUL 2019 (updated on 30 May 2019). Estimated issue date: 24 MAY 2019; Estimated closing/response date: 24 JUNE 2019. **These dates are subject to change. Solicitation will be posted to FBO and attached to this synopsis when it is issued. Closing/response date will be noted on the solicitation.**
2. PR number: FD2030-19-01885. Solicitation number: FA8118-19-R-0041.
3. Service/Spare/Repair/OH: Remanufacture.
4. RMC/RMSC: R3/ P.
5. Item: E3 Flap Drive Ball Screw Assembly.
6. NSN: 1680-01-009-6030RK.
7. P/N: 10-60549-2.
8. Description: Dimensions: Length 34.3750", width: 2", height: 2", weight: 16.5 LB. Material content: Stainless steel, aluminum and bronze. Function: Drives Flaps to control aircraft in flight. The ball screw assembly converts rotary motion of the flap drive trains to the translating motion required to drive trailing edge wing flaps of the E-3 aircraft.
9. Total Line Item Quantity: Best Estimated Quantities are as follows:
Remanufacture: Basic Year - 11 EA; Opt I - 11 EA.
Data: Not Separately Priced.
Over and Above: To Be Negotiated (as needed).
10. Application: E-3.
11. Destination: TBD.
12. Delivery: 3 EA per Month Beginning 60 days After Receipt of Order and Reparable, Whichever is Later. 2 year Requirements contract will be solicited, with 1 Basic Year and 1 Option Year.
13. Qualification Requirements DO apply. Initial Production Evaluation (IPE) may be required. Approved source Linear Motion LLC. No set-asides applicable to this requirement. QRs are available at: https://www.fbo.gov/index?s=opportunity&mode=form&id=2a1ac5229189ec14e60269e
f40e5c3d4&tab=core&_cview=0)
14. Export Control: Not Applicable.
15. UID Note to Contractor: UID marking is required. Contractor Determined Location and Method.
16. Applicable Tech Orders: The Government does not possess a T.O. of remanufacture procedures for this item.
17. Written procedures will be used for this solicitation. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICATION REQUESTS. Note: Faxed solicitation requests can be submitted to AFSC/PZABB, Tinker AFB OK 73145 at FAX NUMBER (405) 739-4417.
18. Point of Contact: Eric Romero; Phone: 405-736-5555; Email: eric.romero.11@us.af.mil.
.

1. Estimated issue date: 24 MAY 2019; Estimated closing/response date: 24 JUNE 2019. **These dates are subject to change. Solicitation will be posted to FBO and attached to this synopsis when it is issued. Closing/response date will be noted on the solicitation.**
2. PR number: FD2030-19-01885. Solicitation number: FA8118-19-R-0041.
3. Service/Spare/Repair/OH: Remanufacture.
4. RMC/RMSC: R3/ P.
5. Item: E3 Flap Drive Ball Screw Assembly.
6. NSN: 1680-01-009-6030RK.
7. P/N: 10-60549-2.
8. Description: Dimensions: Length 34.3750", width: 2", height: 2", weight: 16.5 LB. Material content: Stainless steel, aluminum and bronze. Function: Drives Flaps to control aircraft in flight. The ball screw assembly converts rotary motion of the flap drive trains to the translating motion required to drive trailing edge wing flaps of the E-3 aircraft.
9. Total Line Item Quantity: Best Estimated Quantities are as follows:
Remanufacture: Basic Year - 11 EA; Opt I - 11 EA.
Data: Not Separately Priced.
Over and Above: To Be Negotiated (as needed).
10. Application: E-3.
11. Destination: TBD.
12. Delivery: 3 EA per Month Beginning 60 days After Receipt of Order and Reparable, Whichever is Later. 2 year Requirements contract will be solicited, with 1 Basic Year and 1 Option Year.
13. Qualification Requirements DO apply. Initial Production Evaluation (IPE) may be required. Approved source Linear Motion LLC. No set-asides applicable to this requirement. QRs are available at: https://www.fbo.gov/index?s=opportunity&mode=form&id=2a1ac5229189ec14e60269e
f40e5c3d4&tab=core&_cview=0)
14. Export Control: Not Applicable.
15. UID Note to Contractor: UID marking is required. Contractor Determined Location and Method.
16. Applicable Tech Orders: The Government does not possess a T.O. of remanufacture procedures for this item.
17. Written procedures will be used for this solicitation. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICATION REQUESTS. Note: Faxed solicitation requests can be submitted to AFSC/PZABB, Tinker AFB OK 73145 at FAX NUMBER (405) 739-4417.
18. Point of Contact: Eric Romero; Phone: 405-736-5555; Email: eric.romero.11@us.af.mil.
.