Regenerable CO2 Scrubbing in a Self-Contained Breathing Apparatus

Closed Solicitation Posted

Solicitation number
CBD254-003
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

About this opportunity

The Department of the Army Acquisition Support Center, Joint PEO Chemical and Biological Defense, seeks Phase I SBIR proposals for a continuously regenerable CO2 scrubbing system for self-contained breathing apparatus under DoD SBIR topic CBD254-003, with proposals due February 26, 2025. That deadline has passed as of today. The Set Aside line is Total Small Business.

The objective is a regenerable CO2 scrubber that extends SCBA operating life while meeting size, weight, and heat-generation limits. Technologies must be non-hazardous in use and disposal, and the source names miniature vacuum-swing adsorption as one possible approach. Phase I requires computer-modeled feasibility, sorbent identification, test procedures, and a bench-top breadboard model that characterizes adsorption capacity, desorption rate, adsorption enthalpy, power requirements, and efficiency. Phase II covers optimization, a scalable prototype in a test bed, and testing under operational conditions and in-mask loads. Phase III requires a full-scale prototype comparable in size and weight to existing absorbent systems, integration into an off-the-shelf SCBA, and commercial expansion.

Phase I awards are limited to $209,575 for up to six months of performance. Phase II base awards are capped at $698,582.50 for twelve months, with an optional second year not exceeding the base amount and a total not to exceed $1,397,165. Multiple awards are permitted. Human or animal research is prohibited in Phase I. Submissions go through the Defense SBIR/STTR Innovation Portal, and offerors must disclose any foreign nationals, green card holders, or dual citizens involved and complete fraud, waste, and abuse training before submission. Selection rests on technical merit and scientific quality, with award notifications within 90 days of BAA closing. No CMMC level applies. Place of performance is not stated.

Questions go to Ms. Abigail L. Roots at dtra.belvoir.rd.mbx.jsto-cbd-chem-bio-defense-sbir@mail.mil. NAICS is 541715, and PSC is AC12.

Notice text

DoD SBIR topic CBD254-003

Component: CBD

Command: CBD

Phase: SBIR Program Phase I Action

Technology Areas: Chem Bio Defense

Focus Areas: Biotechnology

Keywords: carbon dioxide scrubbing; physisorption; regeneration; self-contained breathing apparatus

ITAR: No

Objective:

To develop a continuously regenerable CO2 scrubbing system to extend the operating lifetime of a self-contained breathing apparatus (SCBA) while maintaining size and weight limits needed for reduced logistical burden.

Description:

A SCBA is a type of respiratory protection device that provides breathing gas from a source independent of the surrounding atmosphere. A closed-circuit SCBA or “rebreather” re-circulates the breathing air after the carbon dioxide has been removed and the oxygen content restored. Carbon dioxide is typically removed using an absorbent material such as soda lime that cannot be regenerated and must be replaced when expended. Additionally, this carbon dioxide removal process uses an exothermic reaction where the generated heat must be removed using ice or re-freezable cooler packs,1 thus increasing the weight and logistics.

A novel approach is needed to overcome the weight and heat generation associated with carbon dioxide removal. Recently, an explosion of research on carbon capture technology has led to the discovery of new sorbent materials to remove low levels of CO2 while operating in humid environments.2,3 As the scale of environmental carbon capture is so large, the only cost-effective sorbents must be easily regenerable. To extend the lifetime of a SCBA CO2 scrubber, the use of these types of sorbents would require a system capable of sorbent regeneration while in operation. One potential solution for this would be a miniature vacuum-swing adsorption system. Any system will still be required to meet size, weight, and heat generation requirements. Technologies that are non-hazardous in use and disposal are desirable. Ultimately, the goal is to develop a longer lasting, lower profile, and lighter weight SCBA for unique military operations. Such operations may include prolonged entry into immediately dangerous to life and health (IDLH) atmospheres or unknown CBRN environments.

Phase I:

Develop a regenerable, high humidity, low-pressure carbon dioxide removal system that offers significant improvements in the weight and heat generation associated with currently used absorbent materials and ice packs. Determine potential sorbents for relevant SCBA environments. Demonstrate feasibility of proposed enabling technology through computer models based on existing data. Identify key performance parameters and test criteria relevant to closed-circuit SCBA applications. Establish test set up and procedures to assess and validate proposed approach. Fabricate physical “breadboard” model and conduct bench top testing to characterize the performance of the proposed solution. Record data related, but not limited to, the following: adsorption capacity, desorption rate, adsorption enthalpy (thermodynamic properties), power requirements, and efficiency under relevant temperature/humidity conditions.

Phase II:

Refine and optimize Phase I breadboard model to improve carbon dioxide removal capacity and performance. Perform follow-on bench top evaluations to verify improvements made to the basic enabling technology. Modify test setup and improve test procedures as required. Develop functional scalable prototype by incorporating enabling technology into a suitable test bed (e.g., carbon dioxide storage platform or container). Characterize test bed performance under an operational relevant range of external environmental (temperature/humidity) conditions and in-mask heat/humidity loads. The evaluations should include characterizing the breathing air quality, release of any by-products, exothermic reactions, and other factors relevant to the technology. Based on results obtained, implement necessary refinements to the scalable test bed model.

Phase III:

PHASE III: Fully integrate solution into a full-scale, fully-functional prototype containment unit comparable to the size and weight of a typical re-breather carbon dioxide absorbent and cooling mechanism. Demonstrate ability of the technology to be incorporated into a fully-functional closed-circuit SCBA through modification of an existing off-the-shelf system. Expand applications to other commercial markets to include industrial and homeland defense closed-circuit SCBAs.

PHASE III DUAL USE APPLICATIONS: Potential alternative applications include firefighting, industrial, mine rescue, and escape SCBAs. Other possible applications include gas purification, gas separation, and underwater breathing devices (scuba).

Files

File Type Posted
CBD254-003.pdf PDF
CBD_SBIR_254_R4.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors