RECOVERY - XUMU061136B - Renovate Training Facility at Civil Engineer Horizontal Shop, Bldg 10719
Award Notice Posted
- Solicitation number
- SABER_XUMU06-1136B
- Agency
-
Air Force Space Command
Air Force, Department of Defense
- Awarded
- to DJM Construction Co., Inc.
- Set-aside
- No set-aside
Opportunity facts
- Contract number
- FA4610-04-D-0015-0207 Federal contract award
- NAICS code
- 236220 Commercial and Institutional Building Construction
- PSC
- Not on record
- Place of performance
- 1515 Iceland Ave, Room 150 Building 8500 Vandenberg, California 93437, United States
Notice details come from SAM.gov. Updated .
Notice text
3 versions
Update #3 · Latest ·
This modification will consist in upgrading the facility temporary generator power connection from single phase to 3 phase. This modification will accomplish installing approximately 100 feet of #2, 2AWG, type THWN-THHN wire from the service disconnect to the double throw panel and back to the service panel and will connect to the newly installed 3 phase panel (left of the disconnect). The new wire will be fed through existing conduit to the required areas. A 5/8"x8' grounding rod will be installed and bonded to the manual transfer switch. Once this work is accomplished the "B" phase power leg along with the existing "A" & "C" phase will be connected to the temporary generator power connection which will allow the 3 phase back up generator for this facility to connect and supply temporary power to this facility.
Update #2 ·
TAS::57 3404::TAS ARRA XUMU 06-1136B, Renovate Training Facility at CE Horizontal Shop, Bldg 10719, fully funded by Recovery Act.
Work efforts will consist of the renovation of Horizontal Building, Facility 10719 located at VAFB, CA. Work will include: Abate all materials to the interior structure frame of the building; Install new drywall on all walls and prime, texture and paint; Install new 2-foot by 2-foot suspended T-bar ceiling system throughout the facility with 2-foot by 2-foot light fixtures, including emergency ballast; Install a new surface mounted electrical panel for the electrical system with at least 5 extra circuits for future use; Install new semi recessed fire cabinets (3 total: one each classroom and office areas); Install ceramic floor tile on the non-tier floor area of the classroom and the storage room. Install carpet on the tier floor areas and all remaining floor areas throughout the facility; Install ceramic cove base tile for all ceramic tile floor areas and 4-inch rubber cove base for the carpet areas; Upgrade the existing half wall, bordering the tier seating area; Install new window metal frames and dual pane, insulated windows with new interior window treatments (1/2-inch size mini-blinds); Install new interior and exterior door frames; Replace all interior and exterior doors and hardware; Install new threshold for each exterior door; Install new properly sized central heating and air conditioning system and ducting; Install a dual overhead projector system, having a retractable wide screen and remote control capability. Install equipment similar in quality and type as that existing in the primary Disaster Control Center (DCC), Building 11439; Upgrade all communications (CAT 5e cable and RJ-45 receptacles) throughout the facility; Upgrade the fire detection system; Replace the asphalt on the East side of the facility so storm water will drain away from the building; Embed existing Base communications network wire and any other support systems within the walls.
Update #1 ·
RECOVERY - THIS NOTICE IS PROVIDED FOR INFORMATION PURPOSES ONLY. THIS OPPORTUNITY IS AVAILABLE ONLY TO CONTRACTORS UNDER THE SABER PROGRAM, AT VANDENBERG AFB, CA.
RECOVERY - XUMU 06-1136B, RENOVATE TRAINING FACILITY AT CE HORIZONTAL SHOP, BLDG 10719
TASK ORDER MAGNITUDE: $250,000 - $500,000
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity