Recovery--96--project number 013460 J-bulb tainter valve seals consisting of 29 seal assemblies

RECOVERY--USACE, Vicksburg District, has a requirement for J-Bulb Tainter Valve Seals consisting of 12 seal assemblies. All J- bulb seals shall meet the standard Corps of Engineers natural rubber specification material with a 60-70 durometer hardness. J-Bulb Seals: Seal Assembly includes: a 2-3/4 in. diameter bulb x 1in thick tail x 5-3/8in OA wide J-seal type on the side and with a 2-3/4in diameter bulb with a 1/16in thick x 160 degree fluorocarbon cladding (special coverage on top seal) x 1in thick tail x 5-3/8 ft OA wide J-type seal across the top with molded individual 3-way corners and molded straights hot factory vulcanize spliced to size (11ft-1/1in wide x 15ft 8in tall). The fluorocarbon cladding will stop 2-3 inches from the ends and corner area of the corners so as not to be damaged in use under load. Solicitation Number W912EE-09-T-0033 will be available on the Federal Business Opportunities (FedBizOpps) Web Page at http://www.fbo.gov/ on or about 24 August 2009. Hardcopies will not be available. Offerors should check the FedBizOpps Web Page often for new solicitations and/or changes (AMENDMENTS) to existing ones. Offer due date on or about 10 Sep 2009, 1630 Hours. THIS PROCUREMENT IS 100% SMALL BUSINESS SET-ASIDE AND ISSUED UNDER NAICS CODE 326299 WITH A SIZE STANDARD OF 500 EMPLOYEES.