RECOVERY--30--PROJECT NUMBER 322634, Spillway Gate Gear Reducer Refurbishment Lookout Point. PROJECT NUMBER 322632, Spillway Gate Gear Reducer Refurbishment Hills Creek. PROJECT NUMBER 322631, Spillway Gate Gear Reducer Refurbishment Green Peter.
Award Notice Posted
- Solicitation number
- W9127N-10-Q-0017
- Agency
-
ENDIST Portland
US Army Corps of Engineers, Department of Defense
- Awarded
- to Philadelphia Gear Corporation
- Set-aside
- No set-aside
Opportunity facts
- Contract number
- W9127N-10-P-0219 Federal contract award
- NAICS code
- 333612 Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing
- PSC
- Not on record
Notice details come from SAM.gov. Updated .
Notice text
3 versions
Update #3 · Latest ·
Contract Award Amount equals $614,260.00 Recovery Funds, and $331,840.00 Non-Recovery Funds.
The Contractor shall remove and dispose of currently installed oil, dismantle the reducers (as required), remove, transport to the Contractors shop, disassemble and inspect the Herringbone Speed reducers for the Lookout Point, Hills Creek and Green Peter Spillway Gates. The results of the inspection shall be documented in a report that identifies the condition of the individual components, the recommended repairs, the lead time to make the repairs, and the associated costs for making the recommended repairs. At a minimum the gears bearings, seals, gaskets, and other non-reusable fasteners shall be replaced. Shaft seals shall be replaced with split seals. This may require modification to the housing.
Update #2 ·
AMENDMENT
Update #1 ·
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.
The Portland District, US Army Corps of Engineers is issuing a solicitation for the following work. The Contractor shall remove and dispose of currently installed oil, dismantle the reducers (as required), remove, transport to the Contractors shop, disassemble and inspect the Speed reducers for the Lookout Point Spillway Gates, Hills Creek Spillway Gates and Green Peter Spillway Gates. The results of the inspection shall be documented in a report that identifies the condition of the individual components, the recommended repairs, the lead time to make the repairs, and the associated costs for making the recommended repairs. At a minimum the gears bearings, seals, gaskets, and other non-reusable fasteners shall be replaced. Shaft seals shall be replaced with split seals. This may require modification to the housing.
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity