Raw Steel Material

Added: May 10, 2011 3:59 pm Modified: May 18, 2011 9:46 amTrack Changes AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W44W9M109502WV and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-51. The associated North American Industrial Classification System (NAICS) code for this procurement is 331112 with a small business size standard of 750.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-05-20 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be McAlester , OK 74501

The U.S. Army ACC Rock Island - Rock Island Contracting Center requires the following items, Meet or Exceed, to the following:
LI 001, Steel Flat Strip
10 Gauge x 2-1/4 Inch HR ASTM A1011/A1011M Grade Steel Flat Strip (Bar) x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 3093, EA;
LI 002, Steel Round Bar
3/4 Inch DIA. CR 1018 Grade Steel Round Bar x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Trasnported Covered and be in Bundles Not to Exceed 6,000 Pounds Each, 195, EA;
LI 003, Steel Flat Bar
1/4 Inch x 2 Inch A575/M1010 HR Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 811, EA;
LI 004, Steel Flat Bar
1/4 Inch x 3 Inch A-36 Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each, 168, EA;
LI 005, Steel Flat Bar
1/4 Inch x 4 Inch HR 1010 Grade Steel Flat Bar(A575/M1010 HR Grade Steel Flat Bar will also be accepted) x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 3288, EA;
LI 006, Steel Angle
1/4 Inch x 1-1/2 Inch x 1-1/2 Inch A-36 Grade Steel Angle x 20 Foot Long
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 297, EA;
LI 007, Steel Angle
1/4 Inch x 2 Inch x 2-1/2 Inch A-36 Grade Steel Angle x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 17343, EA;
LI 008, Steel Angle
Structural Steel Angle ASTM-A36
1/4 Inch Thick x 1-1/4 Inch x 1-1/4 Inch x 20 Foot Length
Certificate of Testing Shall Accompany Shipment - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

Metal Shall be Free of Varnish, Paint, Markings and Rust
All Shipments Shall be Covered with Tarps During Transportation, 36, EA;
LI 009, Steel Sheet
ASTM-1011/A1011M Commercial Steel Type B
11 Gauge (.1196 Inch) x 36 Inch x 120 Inch
Cut Edge is Preferred, but Mill Edge Will Be Accepted
Certificate of Testing Shall Accompany Shipment - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

Metal Shall be Free of Varnish, Paint, Markings and Rust
All Shipments Shall be Covered With Tarps During Transportation., 1196, SH;
LI 010, Steel Sheet
ASTM-1011/A1011M Commercial Steel Type B
Cut Edge is Preferred, but Mill Edge Will Be Accepted
12 Gauge (.1046 Inch) x 48 Inch x 120 Inch
Certificate of Testing Shall Accompany Shipment - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

Metal Shall be Free of Varnish, Paint, Markings, and Rust
All Shipments Shall be Covered With Tarps During Transportation., 2591, SH;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, U.S. Army ACC Rock Island - Rock Island Contracting Center intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC Rock Island - Rock Island Contracting Center is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov.

Delivery must be made within 45 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 45 - required to make delivery after it receives a purchase order from the buyer.

It is also required any contractor doing business with the government under contract be registered in ORCA, website url below: https://orca.bpn.gov/

Sellers must read and comply with all specifications, shipping information, and terms outlined in the attachments.
An offeror must quote on all items in this solicitation to be eligible for award. All items will be awarded only as a unit. Evaluation of offers will be based, among other factors, upon the total price quoted for all items.

BIDS are to be submitted on the FedBid ONLY or they will not be accepted.

Added: May 10, 2011 3:59 pm Modified: May 18, 2011 9:32 amTrack Changes AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W44W9M109502WV and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-51. The associated North American Industrial Classification System (NAICS) code for this procurement is 331112 with a small business size standard of 750.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-05-20 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be McAlester , OK 74501

The U.S. Army ACC Rock Island - Rock Island Contracting Center requires the following items, Meet or Exceed, to the following:
LI 001, Steel Flat Strip
10 Gauge x 2-1/4 Inch HR ASTM A1011/A1011M Grade Steel Flat Strip (Bar) x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 3093, EA;
LI 002, Steel Round Bar
3/4 Inch DIA. CR 1018 Grade Steel Round Bar x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Trasnported Covered and be in Bundles Not to Exceed 6,000 Pounds Each, 195, EA;
LI 003, Steel Flat Bar
1/4 Inch x 2 Inch A575/M1010 HR Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 811, EA;
LI 004, Steel Flat Bar
1/4 Inch x 3 Inch A-36 Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each, 168, EA;
LI 005, Steel Flat Bar
1/4 Inch x 4 Inch HR 1010 Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 3288, EA;
LI 006, Steel Angle
1/4 Inch x 1-1/2 Inch x 1-1/2 Inch A-36 Grade Steel Angle x 20 Foot Long
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 297, EA;
LI 007, Steel Angle
1/4 Inch x 2 Inch x 2-1/2 Inch A-36 Grade Steel Angle x 20 Foot
All Material Shall Have Mill Certification Sheets - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 17343, EA;
LI 008, Steel Angle
Structural Steel Angle ASTM-A36
1/4 Inch Thick x 1-1/4 Inch x 1-1/4 Inch x 20 Foot Length
Certificate of Testing Shall Accompany Shipment - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

Metal Shall be Free of Varnish, Paint, Markings and Rust
All Shipments Shall be Covered with Tarps During Transportation, 36, EA;
LI 009, Steel Sheet
ASTM-1011/A1011M Commercial Steel Type B
11 Gauge (.1196 Inch) x 36 Inch x 120 Inch
Cut Edge is Preferred, but Mill Edge Will Be Accepted
Certificate of Testing Shall Accompany Shipment - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

Metal Shall be Free of Varnish, Paint, Markings and Rust
All Shipments Shall be Covered With Tarps During Transportation., 1196, SH;
LI 010, Steel Sheet
ASTM-1011/A1011M Commercial Steel Type B
Cut Edge is Preferred, but Mill Edge Will Be Accepted
12 Gauge (.1046 Inch) x 48 Inch x 120 Inch
Certificate of Testing Shall Accompany Shipment - Standard Industrial Chemical Composition, Heat Certification by Lot Number to the Material Being Shipped

Metal Shall be Free of Varnish, Paint, Markings, and Rust
All Shipments Shall be Covered With Tarps During Transportation., 2591, SH;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, U.S. Army ACC Rock Island - Rock Island Contracting Center intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC Rock Island - Rock Island Contracting Center is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov.

Delivery must be made within 45 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 45 - required to make delivery after it receives a purchase order from the buyer.

It is also required any contractor doing business with the government under contract be registered in ORCA, website url below: https://orca.bpn.gov/

Sellers must read and comply with all specifications, shipping information, and terms outlined in the attachments.
An offeror must quote on all items in this solicitation to be eligible for award. All items will be awarded only as a unit. Evaluation of offers will be based, among other factors, upon the total price quoted for all items.

BIDS are to be submitted on the FedBid ONLY or they will not be accepted.

Added: May 10, 2011 3:59 pm Modified: May 17, 2011 8:25 amTrack Changes AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W44W9M109502WV and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-51. The associated North American Industrial Classification System (NAICS) code for this procurement is 331112 with a small business size standard of 750.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-05-20 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be McAlester , OK 74501

The U.S. Army ACC Rock Island - Rock Island Contracting Center requires the following items, Meet or Exceed, to the following:
LI 001, Steel Flat Strip
10 Gauge x 2-1/4 Inch HR ASTM A1011/A1011M Grade Steel Flat Strip (Bar) x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 3093, EA;
LI 002, Steel Round Bar
3/4 Inch DIA. CR 1018 Grade Steel Round Bar x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Trasnported Covered and be in Bundles Not to Exceed 6,000 Pounds Each, 195, EA;
LI 003, Steel Flat Bar
1/4 Inch x 2 Inch A575/M1010 HR Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 811, EA;
LI 004, Steel Flat Bar
1/4 Inch x 3 Inch A-36 Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each, 168, EA;
LI 005, Steel Flat Bar
1/4 Inch x 4 Inch HR 1010 Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 3288, EA;
LI 006, Steel Angle
1/4 Inch x 1-1/2 Inch x 1-1/2 Inch A-36 Grade Steel Angle x 20 Foot Long
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 297, EA;
LI 007, Steel Angle
1/4 Inch x 2 Inch x 2-1/2 Inch A-36 Grade Steel Angle x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 17343, EA;
LI 008, Steel Angle
Structural Steel Angle ASTM-A36
1/4 Inch Thick x 1-1/4 Inch x 1-1/4 Inch x 20 Foot Length
Certificate of Testing Shall Accompany Shipment
Metal Shall be Free of Varnish, Paint, Markings and Rust
All Shipments Shall be Covered with Tarps During Transportation, 36, EA;
LI 009, Steel Sheet
ASTM-1011/A1011M Commercial Steel Type B
11 Gauge (.1196 Inch) x 36 Inch x 120 Inch
Certificate of Testing Shall Accompany Shipment
Metal Shall be Free of Varnish, Paint, Markings and Rust
All Shipments Shall be Covered With Tarps During Transportation., 1196, SH;
LI 010, Steel Sheet
ASTM-1011/A1011M Commercial Steel Type B
12 Gauge (.1046 Inch) x 48 Inch x 120 Inch
Certificate of Testing Shall Accompany Shipment
Metal Shall be Free of Varnish, Paint, Markings, and Rust
All Shipments Shall be Covered With Tarps During Transportation., 2591, SH;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, U.S. Army ACC Rock Island - Rock Island Contracting Center intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC Rock Island - Rock Island Contracting Center is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov.

Delivery must be made within 45 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 45 - required to make delivery after it receives a purchase order from the buyer.

It is also required any contractor doing business with the government under contract be registered in ORCA, website url below: https://orca.bpn.gov/

Sellers must read and comply with all specifications, shipping information, and terms outlined in the attachments.
An offeror must quote on all items in this solicitation to be eligible for award. All items will be awarded only as a unit. Evaluation of offers will be based, among other factors, upon the total price quoted for all items.

BIDS are to be submitted on the FedBid ONLY or they will not be accepted.

Added: May 10, 2011 3:59 pm This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W44W9M109502WV and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-51. The associated North American Industrial Classification System (NAICS) code for this procurement is 331112 with a small business size standard of 750.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2011-05-18 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be McAlester , OK 74501

The U.S. Army ACC Rock Island - Rock Island Contracting Center requires the following items, Meet or Exceed, to the following:
LI 001, Steel Flat Strip
10 Gauge x 2-1/4 Inch HR ASTM A1011/A1011M Grade Steel Flat Strip (Bar) x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 3093, EA;
LI 002, Steel Round Bar
3/4 Inch DIA. CR 1018 Grade Steel Round Bar x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Trasnported Covered and be in Bundles Not to Exceed 6,000 Pounds Each, 195, EA;
LI 003, Steel Flat Bar
1/4 Inch x 2 Inch A575/M1010 HR Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 811, EA;
LI 004, Steel Flat Bar
1/4 Inch x 3 Inch A-36 Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each, 168, EA;
LI 005, Steel Flat Bar
1/4 Inch x 4 Inch HR 1010 Grade Steel Flat Bar x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 3288, EA;
LI 006, Steel Angle
1/4 Inch x 1-1/2 Inch x 1-1/2 Inch A-36 Grade Steel Angle x 20 Foot Long
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 297, EA;
LI 007, Steel Angle
1/4 Inch x 2 Inch x 2-1/2 Inch A-36 Grade Steel Angle x 20 Foot
All Material Shall Have Mill Certification Sheets
All Material Shall be Free of Paint
All Material Shall Have Light to No Rust
All Material Shall be Transported Covered and be in Bundles Not to Exceed 6,000 Pounds Each., 17343, EA;
LI 008, Steel Angle
Structural Steel Angle ASTM-A36
1/4 Inch Thick x 1-1/4 Inch x 1-1/4 Inch x 20 Foot Length
Certificate of Testing Shall Accompany Shipment
Metal Shall be Free of Varnish, Paint, Markings and Rust
All Shipments Shall be Covered with Tarps During Transportation, 36, EA;
LI 009, Steel Sheet
ASTM-1011/A1011M Commercial Steel Type B
11 Gauge (.1196 Inch) x 36 Inch x 120 Inch
Certificate of Testing Shall Accompany Shipment
Metal Shall be Free of Varnish, Paint, Markings and Rust
All Shipments Shall be Covered With Tarps During Transportation., 1196, SH;
LI 010, Steel Sheet
ASTM-1011/A1011M Commercial Steel Type B
12 Gauge (.1046 Inch) x 48 Inch x 120 Inch
Certificate of Testing Shall Accompany Shipment
Metal Shall be Free of Varnish, Paint, Markings, and Rust
All Shipments Shall be Covered With Tarps During Transportation., 2591, SH;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, U.S. Army ACC Rock Island - Rock Island Contracting Center intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Army ACC Rock Island - Rock Island Contracting Center is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov.

Delivery must be made within 45 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 45 - required to make delivery after it receives a purchase order from the buyer.

It is also required any contractor doing business with the government under contract be registered in ORCA, website url below: https://orca.bpn.gov/

Sellers must read and comply with all specifications, shipping information, and terms outlined in the attachments.
An offeror must quote on all items in this solicitation to be eligible for award. All items will be awarded only as a unit. Evaluation of offers will be based, among other factors, upon the total price quoted for all items.

BIDS are to be submitted on the FedBid ONLY or they will not be accepted.