Rast TGW pump

Closed Pre-Solicitation Posted

Solicitation number
N6833524RFI0289
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Place of performance
Joint Base MDL, New Jersey, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The Naval Air Warfare Center, Aircraft Division Lakehurst is seeking to procure a fixed or variable displacement hydraulic pump through this sources sought notice. The pump must meet specific technical requirements, including a maximum displacement of 1.25 cubic inches per revolution, an operating speed range of 1500-3000 RPM, and a maximum delivery rate of 9.7 USGPM at 1800 RPM and 3000 PSI. Interested vendors are requested to submit a capabilities statement package demonstrating their ability to meet these requirements by October 3, 2024. This is a market research effort, and the Navy is not obligated to award a contract based on the responses received.

This requirement is not set aside for any specific business size or type. The NAICS code is 333996 (Fluid Power Pump and Motor Manufacturing), and the PSC is 4310 (Pumps and Compressors - Power and Hand Pumps). The Navy has not provided any information about potential incumbents or the estimated value of the procurement. Respondents are advised to monitor the System for Award Management (SAM) website for any future solicitation related to this requirement.

Notice text

REQUEST FOR INFORMATION - SOURCES SOUGHT  

NAVAL AIR WARFARE CENTER, AIRCRAFT DIVISION LAKEHURST, NJ  

                              RAST TGW PUMP  

INTRODUCTION:  

This Request for Information (RFI) is issued pursuant to FAR 15.201(e) and in conformance with DFARS PGI 206.302. This is a Request for Information/Sources Sought notice to solicit comments, questions and feedback from industry regarding a planned procurement of a fixed displacement hydraulic pump identified below. NAWCAD Lakehurst is requesting vendor sources with the capability of supplying said pump. Interested parties may submit technical literature/brochures on solutions that meet these material requirements. Any relevant information may also be submitted for consideration to aid in refinement of this requirement. 

THIS RFI IS NOT A REQUEST FOR PROPOSAL: 

It is a market research tool being used to determine potential and eligible vendors capable of providing services described herein prior to determining the method of acquisition and issuance of a Request for Proposal. The Government is not obligated to and will not pay for any information received from potential sources as a result of this notice. 

ELIGIBILITY:   

The PSC for this requirement is 4310 (Pumps and Compressors - Power and Hand Pumps), NAICS is 333996 (Fluid Power Pump and Motor Manufacturing).  All interested businesses are encouraged to respond.   

SUBMITTAL INFORMATION:   

It is requested that interested businesses submit to the contracting office a brief capabilities statement package demonstrating ability to meet the requirements outlined in the description.  Responses must include 0596-RAST TGW PUMP in subject. This documentation must address, at a minimum, the following:   

  1. Company Contact Information to include: Company Name, Company Address, Cage Code, Company Business Size, and Point-of-Contact (POC) name, phone number, fax number, and e-mail address.  
  2. Company Profile to include:  Number of employees and DUNS number; 

Statement regarding capability:

If you are a small business, provide an explanation of your company's ability to perform at least 50% of the tasking described in the specifications.   

The capability statement package shall be sent via email to AIR- 2.5.2.5.2 NAVAIR Lakehurst Contracts, Zaib Nageeb, Zaib.Nageeb.civ@us.navy.mil .  Submissions must be received at the office cited no later than 5:30 p.m. Eastern Standard Time on 3 October 2024.  

DESCRIPTION: 

NAWCAD Lakehurst is seeking a Fixed (or Variable that can be fixed) displacement hydraulic pump with the following specifications and characteristics. 

  • Maximum Displacement: 1.25 cubic inches/Rev  
  • Operating speed: 1500 – 3000 RPM (1800 RPM Nominal)  
  • Maximum Delivery Rate (Nominal) at 1800 RPM and 3000 PSI: 9.7 USGPM 
  • Operating pressure: 3000 PSIG 
  • Peak intermittent pressure: 4000 PSIG 
  • Direction of Rotation: Counterclockwise looking on drive shaft  
  • Operating Temperature Range: +10 deg F - +140 deg F 
  • Maximum allowable case drain leakage rate: 2.0 USGPM  
  • System filtration level: 10 – 15 microns  
  • Pump shall be compatible with Hydraulic fluid MIL-PRF-17672, Military Symbol 2075-T-H 
  • Overall Maximum Envelope dimension:  
    • Height: 10 in 
    • Width: 10 in 
    • Length: 10 in  

HOW TO RESPOND: 
All interested parties must submit written responses, preferably via electronic mail within fifteen (15) days after release of this RFI with product information that meets all or a subset of the aforementioned attributes. Please submit your response to this RFI via e-mail no later than 3 October 2024, 5:30 PM EDT to Contract Specialist, Zaib Nageeb at zaib.nageeb.civ@us.navy.mil. The Navy does not intend to award a contract on the basis of this request or otherwise pay for the information solicited. While the Navy intends to use this information for future acquisition planning purposes, it will not release any information about your approach that might in any way compromise your competitive posture or proprietary information. The Navy will not use any information provided to level your company’s approach relative to another competitor. All information received in response to this RFI that is marked PROPRIETARY will be handled accordingly. The Navy will not be liable for or suffer any consequential damages for any proprietary information not properly identified. Proprietary information will be safeguarded in accordance with the applicable Navy regulations. Responses to this RFI will not be returned. Respondents will not be notified of the result of the review.  Failure to respond to this RFI does not preclude participation in any future associated RFP/RFQ that may be issued. Information provided in no way binds the Navy to solicit or award a contract. If a solicitation is released, it will be synopsized on the System for Award Management (SAM) website: www.SAM.gov. It is the potential vendor's responsibility to monitor this site for the release of any follow-on information. 

Similar open opportunities

Opportunity Agency Set-aside Responses due
Pump, axial pistons - and similar replacement parts, in repair/modification of NAICS 336413 Naval Supply Systems Command No set-aside
Seal NAICS 333914 Naval Supply Systems Command No set-aside
Pump/motor assy NAICS 333914 Naval Supply Systems Command No set-aside
Pump unit, rotary NAICS 333914 Naval Supply Systems Command No set-aside
Pump unit, rotary NAICS 333914 Naval Supply Systems Command No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity