(qty 1) Breakout Table

The U.S. Geological Survey (USGS) Idaho National Laboratory Project Office is seeking quotations for the procurement of one hydraulic-powered breakout table to support groundwater monitoring well drilling operations. The breakout table must be compatible with an SD-300 rotary drill rig and capable of assembling and disassembling hammer drilling components with a minimum breakout torque capacity of 80,000 ft-lbs and makeup capacity of 60,000 ft-lbs. Key technical requirements include compatibility with tool outer diameters up to 12 inches, operation using rig hydraulics at 2 GPM minimum flow with 0-20 MPa pressure range, adjustable jaws or chain systems with non-marking dies, torque monitoring for quality assurance, horizontal operation capability with overhead crane support, and integrated forklift pockets and lifting eyes. The equipment must meet OSHA/ANSI safety standards including emergency stop and lockout capabilities and feature a corrosion-resistant finish suitable for outdoor industrial use. Quotations will be evaluated using lowest priced technically acceptable offer (LPTA) criteria, and the response deadline is February 24, 2026 at 1700 Pacific time, with delivery required by March 31, 2026.

This solicitation is designated as a total small business set-aside under NAICS code 332999 (All Other Miscellaneous Fabricated Metal Product Manufacturing) with a 750-employee size standard, making it available only to qualifying small businesses. No incumbent contractor or award value is specified in the solicitation documents. The procurement is for a single unit of equipment to be delivered to Idaho Falls, Idaho 83415 by March 31, 2026. The solicitation applies FAR Part 12 commercial acquisition procedures and simplified acquisition provisions, requiring offerors to submit FAR forms 52.204-24 and 52.204-26 addressing telecommunications equipment prohibitions and provide country of manufacture information. Offerors must acknowledge receipt of all amendments, including Amendment 0002 issued February 18, 2026, which clarified that ratchet-type functionality is required for the breakout table.