Purchase of two (2) marine engines model QSB5. 9-425HP for 34PB0806

THE PURCHASE OF TWO (2) MARINE ENGINES MODEL QSB5.9-425HP

- 5.9L, IN-Line six cylinder, 4 cycle, turbocharged and aftercooled diesel fueled engine.

- Heat exchanger cooling with raw water pump

- Water cooled exhaust manifold with 6 wet exhaust elbow

- Engine lube oil cooler

- Standard engine mounted fuel filter

- Engine mounted oil filter

- Oil pan with front sump and dipstick

- Air filter-dry type

- SAE #3 Flywheel and Flywheel housing

- No mounts, customer furnished front and gear

- No vibration isolators, customers supplied

- Lube oil pump

- 24 volt Prestolite 8599220 isolated ground starter

- 24 volt Prestolite 8LHA3096U isolated ground alternator

- Standard front guard modified for alternator one engine and alternator and AC compressor one engine

- Engine mounted gear oil cooler

- Electric/mechanical throttle interface

- Vessel view digital display, one for helm station and one for engine room

- Smartcraft gauge panel to include the following:

Guage mounting plate

System tachometer

Engine Oil pressure gauge

Gear oil temperature gauge

DC voltmeter

Start/Stop buttons installed in mounting plate

Ignition (on/off) switch installed in mounting plate

20 ft extensions harness

40 ft extension harness

DC to DC (24 volt to 12 volt) convertor

New turbo to intercooler air tube



REQUIRED MODIFICATIONS:

Recalibrate ECM from 480HO to 425 and 12 volt to 24 volt

Change out 12 volt starter and alternator to 24 volt starter and alternator

Change out 12 volt fuel lift pump to 24 volt fuel lift pump

Change out turbocharger air inlet tube

Change oil pan and suction tube

Change hoses from oil filter adaptor to oil filter

Change auxiliary drive pulley

Change sea water pump drive pulley

Modify front guards, one for alternator and one for alternator and AC compressor

Install new gauges in panel plate and install ignition switch and start/stop buttons in panel plate

Add 120 VAC block heater with 72 power cord

Paint and mount customer supplied gear and plumb to engine mounted gear oil cooler