Projectile shot, 15 OZ shot line projectile assembly

1.    This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.
2. Solicitation number 70Z04025Q60118Y00 applies and is used as a Request For Quote (RFQ).   This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2024-05, dated 22 May 2024.
3. It is anticipated that a Best Value purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency.
4. Best Value will be evaluated by who can provide the complete requirement, who meets our required time frame and by price.
5. All vendors providing a quotation must either have an active SAM.Gov registration or provide proof they have submitted their entity for registration.
6. Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV.
7. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order.
8. The United States Coast Guard Surface Forces Logistics Centerhas a requirement for the following items:

Vendor Information:

Entity Name

Entity Unique Entity ID

Entity Address

Entity POC

Entity Phone Number

POC Email Address

Vendor shall provide: 

ITEM 1: 1095 01-102-2043

DESCRIPTION:  
PROJECTILE SHOT, 15 OZ
15 OZ SHOT-LINE PROJECTILE ASSEMBLY
EACH UNIT CONSISTS OF A
4 IN LONG WEIGHT, 12-1/2 IN LONG SHOT-LINE TIE ROD, AND
15-1/2 IN LONG .30 CALIBER BARREL SLUG ALL FABRICATED FROM
316L STAINLESS STEEL.
WEIGHT TO BE POWDER COATED RED, FED-STD-595C NO 11120.
ALL PARTS TO BE MADE IN ACCORDANCE WITH DRAWING 52100-1137-00B,ASSEMBLY 102.
ITEM IS USED PRIMARILY FOR LONG DISTANCE, SHIP-TO-SHIP LINE
HANDLING AT SEA AND WILL BE USED WITH A SPECIALLY MODIFIED
SPRINGFIELD .30CAL MODEL 1903/1917 RIFLE.

THE BARREL SLUG MUST FIT AND SLIDE EASILY THROUGH THE
BARREL.
EACH UNIT TO BE SHIPPED COMPLETELY ASSEMBLED.

PRE-PRODUCTION SAMPLE REQUIRED FOR EVALUATION.

EACH UNIT TO BE INDIVIDUALLY PACKAGED/PACKED IAW
MIL-STD-2073 METHOD 10, SEALED IN A CLOSE FITTING PLASTIC
BAG AND PACKAGED IN INDIVIDUAL TUBES WITH PUSH ON END CAPS.
BRACING OR BLOCKING ARE REQUIRED TO PREVENT MOVEMENT OF THE
PROJECTILE WITHING THE TUBE. THE END CAPS MUST BE SECURED BY
FILAMENT TAPE OR STAPLES TO PREVENT THE PROJECTILE FROM
LOOSENING THE END CAPS.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P(4).

BAR CODING IAW ISO-IEC 16388-2007, CODE 39 IS REQUIRED.
Quantity: 50 EACH

Unit Price:

Line Total:

Estimated Delivery Date:

ITEM 2: 1095 01-102-8031 part number KM 149 / 15 OZ

Description: 
PROJECTILE, BUOYANT
BUOYANT SHOT-LINE PROJECTILE ASSEMBLY
EACH UNIT CONSISTS OF
A BUOYANCY CHAMBER ASSEMBLY, RECEPTACLE ASSEMBLY, 12-1/2 IN
LONG TIE ROD, AND 13-1/2 IN LONG, .30 CALIBER BARREL SLUG.

 ALL PARTS TO BE MADE IN ACCORDANCE WITH COAST GUARD DRAWING
FL-583-2, REV A DATED 2017 APRIL 17.
ITEM IS USED PRIMARILY FOR LONG DISTANCE, SHIP-TO-SHIP LINE
HANDLING AT SEA AND WILL BE USED WITH A SPECIALLY MODIFIED
SPRINGFIELD .30 CAL MODEL 1903/1917 RIFLE.

THE BUYOANCY CHAMBER IS DESIGNED TO HOLD  A 4 IN LONG
CHEMICAL LIGHT ILLUMINATOR.
THE BARREL SLUG MUST FIT AND SLIDE EASILY THROUGH THE RIFLE
BARREL.
EACH UNIT TO BE SHIPPED COMPLETELY ASSEMBLED. PRE-PRODUCTION SAMPLE REQUIRED FOR EVALUATION.

EACH UNIT TO BE PACKAGED/PACKED IAW MIL-STD-2073, METHOD 10,
SEALED IN A CLOSE FITTING PLASTIC BAG AND PACKAGED IN
INDIVIDUAL TUBES WITH PUSH ON END CAPS.  BRACING OR BLOCKING
IS REQUIRED TO PREVENT MOVEMENT OF THE PROJECTILE WITHING
THE TUBE. THE CAPS MUST BE SECURED WITH FILAMENT TAPE OR
STAPLES TO PREVENT THE PROJECTILE FROM LOOSENING THE END

CAPS.
EACH UNIT TO BE INDIVIDUALLY MARKED IAW MIL-STD-129P(4).
BAR CODING IAW ISO-IEC 16388-2007,CODE 39 IS REQUIRED.
Quantity: 30 EACH

Unit Price:

Line Total:

Estimated Delivery Date:

* Delivery address and terms stated below. *

*Any proposed substitutions must be accompanied by a Specification Sheet to undergo evaluation by the requiring officials for compatibility to the Requirement. *

*All Deliveries are Required to by 01NOV2025*

** Total cost shall have delivery and any Freight charges included. **

** SHIPPING: FOB DESTINATION REQUIRED. **

Preparation For Delivery

All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88, Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment.

All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided.

Material shall be packed for shipment using Military Packaging, for examples in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations.

Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse.

All material shall be marked in accordance with MIL-STD-129R and barcoded unless otherwise authorized by the Contracting Officer. All material will have the Purchase Order Number, National Stock Number (if applicable), Vendor name and Part Number clearly marked on the exterior of all material shipped.

All Deliveries are to be made Monday through Friday between the hours of 7:00AM to 1:00PM.

Please make sure that any changes in Delivery Timeframes or tracking information get sent to SK1 GABRIEL JASBON at GABRIEL.O.JASBON@USCG.MIL

Invoicing In IPP

It is a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov.

All invoices must contain the following information: CG Purchase Order number, vendor’s invoice number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON PO IN IPP). Shipping costs will be indicated as a separate line item on the invoice (if applicable). Shipping cost $100 or more must be accompanied by a separate freight invoice when submitting an invoice(s) for payment (if applicable).

To submit an invoice, vendor must have access to www.ipp.gov. To gain access please indicate if you don’t have an account so the issuing office can establish one for you.

FAR Clauses

This order is subject to but is not limited to the following Federal Acquisition Regulations:

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

52.204-26 Covered Telecommunications Equipment or Services-Representation.

52.212-1 Instructions to Offerors—Commercial Products and Commercial Services.

52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services.

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services.

52.211-6 Brand name or equal