Printed Circuit Boards for the Radar Operations Center in Norman, OK

The National Oceanic and Atmospheric Administration seeks printed circuit boards for the Radar Operations Center in Norman, Oklahoma, with proposals due June 19 at 12:00 PM EDT. This is a 100 percent set-aside for Women-Owned Small Business under NAICS 334418 (size standard 750 employees).

Place of performance is Norman, Oklahoma 73069. The scope comprises two line items: fabrication and delivery of one first article unit within 90 days of award, followed by 220 production units within 90 days of first article government approval. The boards are 4-layer FR4 construction (1.575 mm thickness, 150 Tg minimum) measuring 47.625 mm by 95.25 mm, with 1 oz. outer copper, blue solder mask, white silkscreen, and ENIG finish. Boards must comply with IPC A-600 Class 2 inspection standards and operate across 10°C to 35°C (non-operating range −35°C to +60°C, altitude to 3,300 meters). Manufacturing must occur in the United States. The bill of materials specifies 27 electronic components with approximate total component cost of $80.62 per board; contractors must procure all components and populate boards using provided Gerber files.

Award will be made on a firm fixed price basis to the responsive responsible quoter offering best value, evaluated on technical compliance, price (combined line items), and past performance (two to three references required). First article testing is conducted by the Radar Operations Center, which may waive testing if the contractor demonstrates prior successful delivery history. All contractors must be registered in SAM with a valid UEI prior to award. Questions are due within five days of June 10 (by June 15). Delivery is to 1200 Westheimer Drive, Norman, Oklahoma 73069, Attn: Tammy Buie. Gerber PDF files are available upon request from abigail.green@noaa.gov.