PR7996118-19PK4019Q5018-Fabrication-Material-Consular

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 19PK4019Q5018 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-101. The associated North American Industrial Classification System (NAICS) code for this procurement is 236220 with a small business size standard of $36.50M. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2019-03-29 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be North Brunswick, NJ 08902
The U.S. Consulate General Karachi, Pakistan requires the following items, Meet or Exceed, to the following:
LI 001: Supply Diffuser 6 in neck
Size 24x24 inch
Model# HT3D06I, 3, EA;
LI 002: Flexible duct
Size 6 inch
Model# D940003900, 2, EA;
LI 003: 6 in Flexible duct metal connector
Size 6 inch
Model# FC6, 2, EA;
LI 004: Master Flow 26 Gauge Flue Wye
Size 6x6x6 inch
Model# 26FY6X6X6, 2, EA;
LI 005: Gypsum board glass Windows with frame
Size 1300 x 1295 mm, 3, EA;
LI 006: Flush wooden Door with metal frame
Size 908.1X2117.7X44.5 mm
Swing: right side 3 each
Swing: left side 3 each
DOOR TYPE: 5508
MODEL:LRDV400
COMPANY: P.W.S INTERNAT, 6, EA;
LI 007: Gypsum Board 5/8" thick Type-X
Size 48x96 inch
Model# 14211011308, 50, EA;
LI 008: Sprinkler Head
Model # V2707, V2708, 1, EA;
LI 009: Fluorescent Light A4 HR2EP3GAX-3U15/8S33I-UNV-EB82
SIZE: 24x24 in
Type- F32T8
(WWW.COOPERLIGHTING.COM), 5, EA;
LI 010: Fluorescent Light A5 2GCAFA-2U15/8A125-UNV-EB81
SIZE: 24x24 in
Type- F32T8
(WWW.COOPERLIGHTING.COM), 5, EA;
LI 011: ProTRAK 25 3-5/8 in. x 10 ft. 25-Gauge EQ Galvanized Steel Track
Size 25x3-5/8 x10'
Model# 360081135, 10, EA;
LI 012: Galvanized Steel Wall Framing Stud
Size 25x3-5/8 x10'
Model# 726330, 35, EA;
LI 013: Hilti bolt 3 in long thread carbon steel
Size 3 inch long
Model# 3512301, 60, EA;
LI 014: Drywall Screws Type tips
Size 1.5 inch long
Model# 112CDWS1, 1500, EA;
LI 015: Drywall pre mixed joint compound
4.5 gal
Model# 381466, 10, EA;
LI 016: Drywall joint tape
300 ft long
Model# FDW8654-U, 3, EA;
LI 017: The Paper Taper
Model# PT76, 2, EA;
LI 018: Office furniture wooden top
size: 54 inch
www.knoll.com, 6, EA;
LI 019: Office furniture wooden top
size: 48 inch
www.knoll.com, 4, EA;
LI 020: Office furniture wooden top
size: 72 inch
www.knoll.com, 5, EA;
LI 021: Office furniture wooden top
size: 42 inch
www.knoll.com, 5, EA;
LI 022: office partition panels
size: 36 inch
www.knoll.com, 6, EA;
LI 023: Office partition panels
size: 24 inch
www.knoll.com, 8, EA;
LI 024: 3000 lb. Load Capacity Drywall Cart
Model# I-BMD3131YGR, 1, EA;
LI 025: 5 Amp Corded Variable Speed
Drywall Sander with 15 ft. Hose
Model# 6369, 1, EA;
LI 026: Hammer-End Joint Knife
size: 4 inch
Model# 22-034, 2, EA;
LI 027: Hammer-End Joint Knife
size: 6 inch
Model# 22-036, 2, EA;
LI 028: Hammer-End Joint Knife
size: 10 inch
Model# 5-156, 2, EA;
LI 029: Hammer-End Joint Knife
size: 12 inch
Model# 5-137, 2, EA;
LI 030: Taping Knife
size: 10 inch
Model# 20-040, 5, EA;
LI 031: Stainless Steel Round Bottom Mud Pan with Non-Slip Grip
size: 14 inch
Model# TP03078, 3, EA;
LI 032: Inside Corner Tool
size: 4x3.5 inch
Model# 82-032, 6, EA;
LI 033: Outside Corner Tool
size: 4x3.5 inch
Model# 82-034, 6, EA;
LI 034: CO-2A 1-1/4 in. Corner Bead Tool with Mallet
Model # 71-002, 2, EA;
LI 035: Wall-Pro Comfort Fixed Blade Knife
Model # 15-009, 5, EA;
LI 036: Plastic Hand Sander
size: 3-1/4x9-1/4 inch
Model# 88-006, 4, EA;
LI 037: 20-Volt MAX XR Lithium-Ion Cordless Brushless Drywall Screw Gun Kit with (2) Batteries 2Ah,
Charger and Contractor Bag
Model# DCF620D2, 2, EA;
LI 038: Straight Cut Tin Snips
size: 10 inch
Model# 1256-41-10, 2, EA;
LI 039: Stainless Steel Chalk Line with Line Level
Model# 215, 1, EA;
LI 040: Chalk in Blue
Model# DWHT47049, 10, EA;
LI 041: Sander Papers 60, grit hook
Model# 742529-7, 5, EA;
LI 042: Sander Papers 80, grit hook
Model# 742529-7, 5, EA;
LI 043: Sander Papers 100, grit hook
Model# 742529-7, 5, EA;
LI 044: Sander Papers 150 grit hook
Model# 742529-7, 5, EA;
LI 045: Aluminum Hawk
size: 12-1/2 in. x 12-1/2 inch
Model# 47-002, 2, EA;
LI 046: Plastic Hand Sander
SIZE: 3-1/4 in. x 9-1/4 in.
Model# 88-006, 2, EA;
LI 047: Durock 5/8 in x 4 ft x 8 ft cement board
SIZE: 5/8" x 4' x 8'
Model# 170575, 50, EA;
Solicitation and Buy Attachments
***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***
For this solicitation, U.S. Consulate General Karachi, Pakistan intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Consulate General Karachi, Pakistan is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or marketplacesupport@unisonglobal.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
If this is a “Brand Name Only†procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es).
In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com.
This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov.
All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications.
New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer’s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer’s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software.
All bid prices must include shipping FOB Destination. No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award.
The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far.
.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 19PK4019Q5018 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-101. The associated North American Industrial Classification System (NAICS) code for this procurement is 236220 with a small business size standard of $36.50M. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2019-03-22 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be North Brunswick, NJ 08902
The U.S. Consulate General Karachi, Pakistan requires the following items, Meet or Exceed, to the following:
LI 001: Supply Diffuser 6 in neck
Size 24x24 inch
Model# HT3D06I, 3, EA;
LI 002: Flexible duct
Size 6 inch
Model# D940003900, 2, EA;
LI 003: 6 in Flexible duct metal connector
Size 6 inch
Model# FC6, 2, EA;
LI 004: Master Flow 26 Gauge Flue Wye
Size 6x6x6 inch
Model# 26FY6X6X6, 2, EA;
LI 005: Gypsum board glass Windows with frame
Size 1300 x 1295 mm, 3, EA;
LI 006: Flush wooden Door with metal frame
Size 908.1X2117.7X44.5 mm
Swing: right side 3 each
Swing: left side 3 each
DOOR TYPE: 5508
MODEL:LRDV400
COMPANY: P.W.S INTERNAT, 6, EA;
LI 007: Gypsum Board 5/8" thick Type-X
Size 48x96 inch
Model# 14211011308, 50, EA;
LI 008: Sprinkler Head
Model # V2707, V2708, 1, EA;
LI 009: Fluorescent Light A4 HR2EP3GAX-3U15/8S33I-UNV-EB82
SIZE: 24x24 in
Type- F32T8
(WWW.COOPERLIGHTING.COM), 5, EA;
LI 010: Fluorescent Light A5 2GCAFA-2U15/8A125-UNV-EB81
SIZE: 24x24 in
Type- F32T8
(WWW.COOPERLIGHTING.COM), 5, EA;
LI 011: ProTRAK 25 3-5/8 in. x 10 ft. 25-Gauge EQ Galvanized Steel Track
Size 25x3-5/8 x10'
Model# 360081135, 10, EA;
LI 012: Galvanized Steel Wall Framing Stud
Size 25x3-5/8 x10'
Model# 726330, 35, EA;
LI 013: Hilti bolt 3 in long thread carbon steel
Size 3 inch long
Model# 3512301, 60, EA;
LI 014: Drywall Screws Type tips
Size 1.5 inch long
Model# 112CDWS1, 1500, EA;
LI 015: Drywall pre mixed joint compound
4.5 gal
Model# 381466, 10, EA;
LI 016: Drywall joint tape
300 ft long
Model# FDW8654-U, 3, EA;
LI 017: The Paper Taper
Model# PT76, 2, EA;
LI 018: Office furniture wooden top
size: 54 inch
www.knoll.com, 6, EA;
LI 019: Office furniture wooden top
size: 48 inch
www.knoll.com, 4, EA;
LI 020: Office furniture wooden top
size: 72 inch
www.knoll.com, 5, EA;
LI 021: Office furniture wooden top
size: 42 inch
www.knoll.com, 5, EA;
LI 022: office partition panels
size: 36 inch
www.knoll.com, 6, EA;
LI 023: Office partition panels
size: 24 inch
www.knoll.com, 8, EA;
LI 024: 3000 lb. Load Capacity Drywall Cart
Model# I-BMD3131YGR, 1, EA;
LI 025: 5 Amp Corded Variable Speed
Drywall Sander with 15 ft. Hose
Model# 6369, 1, EA;
LI 026: Hammer-End Joint Knife
size: 4 inch
Model# 22-034, 2, EA;
LI 027: Hammer-End Joint Knife
size: 6 inch
Model# 22-036, 2, EA;
LI 028: Hammer-End Joint Knife
size: 10 inch
Model# 5-156, 2, EA;
LI 029: Hammer-End Joint Knife
size: 12 inch
Model# 5-137, 2, EA;
LI 030: Taping Knife
size: 10 inch
Model# 20-040, 5, EA;
LI 031: Stainless Steel Round Bottom Mud Pan with Non-Slip Grip
size: 14 inch
Model# TP03078, 3, EA;
LI 032: Inside Corner Tool
size: 4x3.5 inch
Model# 82-032, 6, EA;
LI 033: Outside Corner Tool
size: 4x3.5 inch
Model# 82-034, 6, EA;
LI 034: CO-2A 1-1/4 in. Corner Bead Tool with Mallet
Model # 71-002, 2, EA;
LI 035: Wall-Pro Comfort Fixed Blade Knife
Model # 15-009, 5, EA;
LI 036: Plastic Hand Sander
size: 3-1/4x9-1/4 inch
Model# 88-006, 4, EA;
LI 037: 20-Volt MAX XR Lithium-Ion Cordless Brushless Drywall Screw Gun Kit with (2) Batteries 2Ah,
Charger and Contractor Bag
Model# DCF620D2, 2, EA;
LI 038: Straight Cut Tin Snips
size: 10 inch
Model# 1256-41-10, 2, EA;
LI 039: Stainless Steel Chalk Line with Line Level
Model# 215, 1, EA;
LI 040: Chalk in Blue
Model# DWHT47049, 10, EA;
LI 041: Sander Papers 60, grit hook
Model# 742529-7, 5, EA;
LI 042: Sander Papers 80, grit hook
Model# 742529-7, 5, EA;
LI 043: Sander Papers 100, grit hook
Model# 742529-7, 5, EA;
LI 044: Sander Papers 150 grit hook
Model# 742529-7, 5, EA;
LI 045: Aluminum Hawk
size: 12-1/2 in. x 12-1/2 inch
Model# 47-002, 2, EA;
LI 046: Plastic Hand Sander
SIZE: 3-1/4 in. x 9-1/4 in.
Model# 88-006, 2, EA;
LI 047: Durock 5/8 in x 4 ft x 8 ft cement board
SIZE: 5/8" x 4' x 8'
Model# 170575, 50, EA;
Solicitation and Buy Attachments
***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***
For this solicitation, U.S. Consulate General Karachi, Pakistan intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Consulate General Karachi, Pakistan is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or marketplacesupport@unisonglobal.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
If this is a “Brand Name Only†procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es).
In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com.
This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov.
All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications.
New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer’s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer’s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software.
All bid prices must include shipping FOB Destination. No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award.
The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far.
.