Powder Bed Fusion Development and Characterization of Burn Resistant Alloys
Closed Special Notice Posted
- Solicitation number
- 80NSSC25910803Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- PSC
- AJ12 General Science And Technology R&D Services; General Science And Technology; Applied Research
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center has published a Special Notice for Powder Bed Fusion Development and Characterization of Burn Resistant Alloys, classified under NAICS code 541715 for research and development in physical and engineering sciences. The agency intends to issue a sole source contract to North American Manufacturing Pros LLC of Ardmore, Alabama, determining this company is the sole provider of the required capabilities. This procurement is set aside for small businesses and will utilize commercial item acquisition procedures under FAR Parts 12 and 13. Performance will take place at NASA's Marshall Space Flight Center, with NASA/NSSC serving as the procuring center.
The Special Notice serves as a market research tool to determine whether the procurement should remain sole source or be opened to full and open competition based on industry responses. Interested organizations must submit written capabilities and qualifications statements by 3:00 p.m. Central Standard Time on July 31, 2025, to the designated procurement contacts Monica Wilson and Shari Trigg. Oral communications are not acceptable, and only written submissions will be considered for evaluation purposes. The government retains full discretion in deciding whether to proceed with sole source procurement or transition to competitive bidding based on the responses received. Organizations responding should demonstrate their qualifications specifically for powder bed fusion development and characterization of burn resistant alloys to be considered for potential competition.
Notice text
Synopsis:
NASA/NSSC has a requirement for Powder Bed Fusion Development and Characterization of Burn Resistant Alloys.
NASA/NSSC intends to issue a sole source contract to NORTH AMERICAN MANUFACTURING PROS LLC, 29176 Al Highway 53, Ardmore, Alabama 35739-8716 under the authority of FAR 13.106-1(b)(1)(i). It has been determined that NORTH AMERICAN MANUFACTURING PROS LLC is the sole provider of Powder Bed Fusion Development and Characterization of Burn Resistant Alloys.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).
The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13.
The NAICS Code for this procurement is 541715
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 7/31/2025. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .
Primary Point of Contact:
Monica D Wilson
Procurement Assistant
Monica.d.wilson@nasa.gov
Secondary Point of Contact:
Shari Trigg
Lead Contract Specialist
shari.trigg@nasa.gov
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| ComposiCAD Gold 4 axes | Shared Services Center | No set-aside | |
| URGENT-BP-1 Lunar Regolith simulant Compressibility Testing | Shared Services Center | No set-aside | |
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside | |
| TECHNOLOGY TRANSFER LICENSING OPPORTUNITY: Additively Manufactured Propulsion Catalysts (MFS-TOPS-120) | Marshall Space Flight Center | No set-aside | |
| FY27 Aitech SR-1 ACSSL SP0 1553 Purchase | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity