Plasma Exhaust Filtration System-FARR Gold Series Packaged (GSP) Dust Collector System or Equivalent

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. The requirement is to procure a brand name product for all items in this requirement. Further clarification on the items are listed below. The statutory authority for this brand name procurement is 10 U. S. C. 2304(c)(1) per FAR 6.302-1 (c).

The government requires that all contractors must be registered with System for Award Management (SAM). No award can be made unless the vendor is registered in SAM. For additional information and to register to SAM, please access the following website: https://www.sam.gov/. In order to register with SAM and to be eligible to receive an award from this acquisition office, all offerors must have a DUN & Bradstreet Number. A DUN & Bradstreet Number may be acquired free of charge by contacting Dun & Bradstreet online at https://dnb.com/products/eupdate/requestOptions.html or by phone at (800)-333-0505.

This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. All responsible sources may submit a quotation which, if timely received, will be considered by the Agency. All proposals received will be reviewed and evaluated by the Lowest Price Technically Acceptable to the government.
Naval Medical Research Unit Dayton has an existing plasma-cutting table in its fabrication shop and is in need of an exhaust filtration system to safely operate within the fabrication shop. The requirement must be capable of collecting, cleaning, and filtering the exhaust fumes and particles generated while using the plasma-cutting table.
It must have requirement of spark arrest and fire retardant filter media to safely ingest incoming exhaust/dust and have capability to filter approximately 0.5 micron particulate size. Installation will be done by Naval Medical Reasearch Unit Dayton.

In order to determine the appropriate system for the given application, the vendor must visit the NAMRU-D fabrication shop to view the existing plasma cutting table, measure and inspect the equipment and layout, and discuss the requirements.
Quantity required: 1 ea. FARR Gold Series Package (GSP) Dust Collector System or equivalent

• Fully assembled and wired at the factory, including all controls, fan, and cleaning system
  
• HemiPleat® Gold Cone® fire-retardant filter technology
  
• Airflows from 1000 to 3000 CFM at 8 in. w.c.
  
• Reverse pulse cleaning system with on-demand, manual and remote controls
  
• Built-in spark baffle reduces the chance of spark-generated fires
  
• Quick-access, "no tool required" door, filter and dustbin access
  
• Voltages: 208, 230, 460 and 575 VAC 60hz/3 phase
  
• NEMA 4 electrical rating
  
• Rugged construction from 7 and 10 gauge steel
  All items will be shipped to Wright Patterson AFB, Ohio 45433. Please submit quotes to both POC's listed. The quote should include all applicable shipping and handling costs. As NAMRU-D is a Government facility, no sales tax will be paid. All quotes must include the Company Name, Full Address, CAGE Code and Point of Contact information including Name, Phone Number and EMail address. All invoices for this standing order will be submitted electronically through Wide Area Work Flow(WAWF) - Invoicing Receipt Acceptance Property Transfer (iRAPT).

.