Plan HD 500 Cutter Head

This is a request for quote: 

Respondants must insure that they have completed all of their representations and certifications on SAM.GOV

1. The minimum specifications for the cutter head is a cutting width of 65 inches and a maximum over all width of 77 inches.
The weight of the cutter head will be no more 2500 pounds. The cutter head will have 22 teeth on the drum no more no less.
This attachment will be use on a PT100G Terex skid steer. The fittings on the skid steer are(_______) and the cutter head will be
equipped with the same fittings. The hydraulic system will be able to have a flow of 50 gallons per minute and operating
pressure up to 6000 psi

2. The drum of the cutter head will have 22 Planar teeth. Any other type will is unacceptable. This is a hard requirement, no
exceptions. The cutter head will be equipped with a push bar to push trees over as it is cutting and operator safety. This is a
hard requirement, no exceptions.

3. The vender shall call Government Point(s) of Contact to schedule delivery during the hours of (0645 to 1630) not later than
one business day in advance of anticipated delivery. At which time, the Government will provide the exact location for that
particular delivery. Upon delivery, a certified sales representative will be present on site to provide hands on training and set up
and operational instruction to Government personal at no addition cost to the government. This is a hard requirement, no
exceptions.