Pipe, metallic 1-1/2" seamless titanium

NOTE: ONLY NEED TO PROVIDE A QUOTE FOR LINE ITEMS 0001-0001AB & 0004-0004AB OF THE ATTACHED SOLICITATION. ALL CLAUSES IN THE SOLICITATION ARE STILL APLICABLE.



PIPE, METALLIC, 1-1/2" IPS, 1.900" OD X 0.145" WALL, SCH 40S, SEAMLESS, TITANIUM, GR-2 IN ACCORDANCE WITH ASTM B337-95; EB P/N 41-00-0005M; ONE CONTINUOUS LENGTH. CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. DATA SHALL BE REPORTED IN ACCORDANCE WITH DI-MISC-81020. THE FOLLOWING

ADDITIONAL REQUIREMENTS SHALL APPLY:



1. TITANIUM PIPE SHALL BE IN ACCORDANCE WITH ASTM-B337-95 EXCEPT THAT THE PERMISSIBLE VARIATIONS IN OUTSIDE DIAMETER ARE TO BE 0 (ZERO) INCHES OVER AND 1/64 INCH UNDER AND THAT THE THICKNESS TOLERANCE IS TO BE +/- 10% OF NOMINAL.





2. ULTRASONIC TESTING OF TITANIUM PIPE SHALL BE IAW PARAGRAPH 4.4.9 OF MIL-T-16420K W/AMD-1.



3. TITANIUM (GR 2) IS TO BE IAW THE LISTED MATERIAL SPEC WITH THE FOLLOWING RESTRICTIONS:

A. MAX IRON CONTENT IS NOT TO EXCEED 0.20%

B. MAX OXYGEN CONTENT IS NOT TO EXCEED 0.20%

C. MATERIAL SHALL BE SUPPLIED IN THE ANNEALED CONDITION. THE ANNEALED HEAT TREATMENT SHALL BE LOW TEMPERATURE ANNEAL IAW SAE AMS-H-81200C. CUMULATIVE ANNEALING TIME SHALL NOT EXCEED 120 MINUTES. AIR COOLING OR ITS EQUIVALENT IS REQUIRED.



ONE CONTINUOUS LENGTH

**MERCURY FREE**





(1) 7 CONTINUOUS FEET PIECE



&



(1) 6 CONTINUOUS FEET PIECE