PiggyBack Crane Repairs
Closed Solicitation Posted
- Solicitation number
- W9123726QA039
- Agency
-
ENDIST Huntington
US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Place of performance
- Meldahl Locks and Dam 2443 US Highway 52, Felicity, OH 45120
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Corps of Engineers Engineering District Huntington seeks crane repair services at Meldahl Locks and Dam, with proposals due July 10, 2026. This procurement is a Total Small Business set-aside.
Work consists of replacing the hydraulic swivel coupling and trolley hydraulic hoses on the piggyback crane, furnishing all labor, equipment, access, and materials. The contractor must replace existing brackets with draw chains using only new components and is responsible for proper handling, maintenance, storage, and protection of all materials and equipment until installation and acceptance. The contractor shall test the crane post-installation to ensure it operates without further issues, remedy any deficiencies discovered, and retest until the crane returns to service. Prior to work initiation, the contractor must secure all crane operating machinery, immobilize all components to prevent damage, and de-energize the crane system before removal. Coordination with project personnel on Lock-Out Tag-Out procedures is required.
Place of performance is Meldahl Locks and Dam, Felicity, Ohio. The NAICS code is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The PSC code is J039, Maint/Repair/Rebuild Of Equipment—Materials Handling Equipment.
Notice text
This work consists of furnishing all labor, equipment, access, and materials for replacing the hydraulic swivel coupling and trolley hydraulic hoses that operate the hydraulic swivel coupling on the piggyback crane meeting the requirements of this specification at Meldahl Locks and Dam. The existing brackets shall be replaced by the contractor with draw chains. All components shall be new. The Contractor shall be responsible for the proper handling, maintenance, storage and protection of all materials and equipment until installed and accepted. Once all these items are installed, the Contractor shall test the crane to ensure the crane operates without further issues to these components. Contractor shall remedy any issues and retest until the crane is returned to service. Prior to any work being performed, the Contractor shall ensure that all crane operating machinery is properly secured and all components immobilized to prevent damage. The crane system must be de-energized prior to removal. Coordinate with the Project Personnel to properly Lock-Out Tag-Out (LOTO) the equipment being serviced. See attached photographs for further details.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Repair/Replace Overhead Cranes on Fort Drum | MICC Fort Drum | Total Small Business | |
| Crane & Hoist Maintenance and Repair | Air Force Sustainment Center | Total Small Business | |
| Crane LMI System, Barge Integration and Components Installation | ENDIST St Paul | Total Small Business | |
| Garrison trash rack modification crane rental | ENDIST Omaha | Total Small Business | |
| Repair / Overhaul Allied Systems Marine Crane Dual Point Davits | — | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity